Transportation Luminaires
Bringing Safety and Security to Light
Transportation
LED Luminaires
TR
Designed and manufactured in the USA
Tunnel and Underpass Lighting
LuxTran™ LED
LuxTran tunnel and underpass lighting features
• Corrosionresistant,one-piece,type304or316
stainless steel housing
• Clear tempered glass or polycarbonate lens
• Passivated post welding
• VibrationtestedtoANSIC136.31;watertestedto
ANSIC136.27-2012
• Customizable mounting brackets
• Stainless steel doorframe secured to housing
with lockable rotary latches
DLD Series
•
•
•
•
•
•
•
•
•
Lumen packages: 7716 to 16019
70 CRI
100,000 hr LED Lifetime (L70)
Surface ceiling mount
Housing features mounting brackets that
allow 90° adjustment from either direction
One-piece, seam welded .063" 3003
aluminum alloy construction
Doorframe sealed to housing with closed
cell neoprene gasketing
Stainless steel latches allow tool-less access
to electrical compartment
Prismatic tempered glass or polycarbonate
deep dish lens
• 1,000 hour salt spray tested
WET/DAMP
100
PSI
ANSI C136.27
100
PSI
100
PSI
100
PSI
ANSI C136.27
ANSI C136.27
ANSI C136.27
LTL Series
LTS Series
LTSI Series
LTSIU Series
•
•
•
•
•
• Lumen packages:18661 to 90295
• Minimum 70 CRI
• 80,000-125,000 hr LED Lifetime
(L70)
• Powered by remote driver
• Suitable for supplemental lighting
• Various distribution types available
• Type ll, Pro-Beam, Type V-Narrow
Round, and Type V-Square
distributions available
• Lumen packages:18661 to 90295
• Minimum 70 CRI
• 80,000-125,000 hr LED Lifetime
(L70)
• Suitable for interior and exterior
supplemental lighting
• Type II, III, IV, IV-Narrow and
V-Square distributions available
• Lumen packages: 7746 to 35811
• Minimum 65 CRI
• 80,000-125,000 hr LED Lifetime
(L70)
• Suitable for supplemental
lighting in transition zones;
ceiling or wall mount
• Type II, Pro-Beam, Type V-Narrow
Round and Type V Square
distributions available
Lumen packages: 8531 to 12420
Minimum 65 CRI
150,000 hr LED Lifetime (L70)
Powered by remote driver
Suitable for continuous row
mounting
• Type ll, Pro-Beam, Type V-Narrow
Round, and Type V-Square
distributions available
C
IP66
3G
ADA
NEMA
4X
C
IP66
3G
ADA
NEMA
4X
C
IP66
3G
ADA
NEMA
4X
C
IP66
3G
Parking Structure and Surface Lot Lighting
TekDek™ LED
TekDek parking series lighting features
• Corrosion resistant housing
• Compatible with TekLink™ lighting controls
• Textured lens for superior glare control
• 10-yearlimitedwarranty
• Concealed heat sink for effective thermal management
TPDPT Series
•
•
•
•
•
•
•
•
Lumen package: 6693-34361
Minimum 70 CRI
50,000-150,000 hr LED Lifetime (L70)
Type II, III, IV, V-Narrow Round, and
V-Wide Square distributions
Sealed optics with IESNA full cutoff
distribution; flat lens option
Internal house-side shield for lower
wind loading
ETL Certified IP65 per IEC 60598
Vibration tested to ANSI C136.31
IP65
C
TD17 Series
TD17HO Series
TD17B Series
TPD23 Series
• Lumen packages: 5507 to 11470
• Minimum 70 CRI
• 110,000-150,000 hr LED Lifetime
(L70)
• Patented, sealed optics with
uplight feature
• Type ll, Type V-Square and V-Round
distributions*
• ETL Certified IP65 per IEC 60598
* Consult factory for additional distribution types
• Lumen packages: 6207 to 14681
• Minimum 70 CRI
• 125,000-175,000 hr LED Lifetime
(L70)
• Patented, sealed optics with
uplight feature
• Type ll, Type V-Square and V-Round
distributions*
• ETL Certified IP65 per IEC 60598
•
•
•
•
•
•
•
•
C
IP65
C
IP65
Lumen packages: 4914 to 10258
Minimum 70 CRI
60,000-90,000 hr LED Lifetime (L70)
Patented, sealed optics with
uplight feature
• Type ll, Type V-Square and V-Round
distributions*
• ETL Certified IP65 per IEC 60598
C
IP65
3G
Lumen packages: 9424-28720
Minimum 65 CRI
80,000-150,000 hr LED Lifetime (L70)
Type II, III, IV, V-Narrow Round, and
V-Wide Square distributions
• Sealed optics with IESNA full cutoff
distribution
• Internal house-side shield for lower
wind loading
• ETL Certified IP65 per IEC 60598
C
IP65
LED
Platform/General Area and Stairwell/Corridor Lighting
TMLHA Series
SLR Series
TES Series
•
•
•
•
• Stainless steel housing; passivated,
seam welded construction; corrosion resistant
• Stainless steel doorframe secured to housing
with stainless steel rotary latches
• High-impact polycarbonate lens
•
•
•
•
Lumen packages: 2333 to 9477
82 CRI
60,000-80,000 hr LED Lifetime (L70)
Die-cast extruded, marine-grade aluminum
housing; corrosion resistant; flat, round or reveal
end caps
• Surface mount – ceiling or wall;
12"×24", 12"×48"
• Polycarbonate lens standard; clear prismatic
or pearlescent
C
•
•
IP65
•
•
IP64
ADA
Lumen packages: 3694 to 3938
82 CRI
80,000 hr LED Lifetime (L70)
One-piece, cold rolled steel or stainless steel
housing; corrosion resistant
Surface ceiling or wall mount – 5"× 48"
Continuous 1" open leaf steel hinge secured
to doorframe
Clear or pearlescent polycarbonate* or
DR acrylic lens
Continuous row mounting option
IP65
* Polycarbondate Lens Only
Nova Series
SH Series
MOS Series
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Lumen packages:1801 to 9555
82 CRI
60,000-80,000 hr LED Lifetime (L70)
Cold rolled steel backplate; corrosion resistant
Available in 5"×48", 10"×48"
One-piece wraparound, high impact
polycarbonate lens
Lumen packages: 3921 to 6591
82 CRI,
80,000 hr LED Lifetime (L70)
Cold rolled steel backplate with seam welded end
caps; corrosion resistant
• Available in 5"×48"and 8"×48" nominal widths
• Cold formed polycarbonate lens
ADA
Lumen packages: 2267 to 4832
Minimum 75 CRI
100,000 hr LED Lifetime (L70)
Surface ceiling or wall mount – 11"×18"
Marine-grade aluminum housing
Polycarbondate or acrylic lens option
Diffused LED source reduces glare while
maintaining high optical efficiency
• Dimming capability up to 90%
• Designed to meet NFPA101 standards
• 10-year limited product warranty
C
TCD Series
TDL6 Series
• One-piece, stainless steel housing; corrosion
resistant; continuous stainless steel hinge
• Corner mount
• Available in 8"× 24" and 48" lengths
• Sealed lens with continuous retention
•
•
•
•
C
•
•
•
•
C
Lumen packages:1001 to 1283
Minimum 80 CRI
125,000 hr LED Lifetime (L70)
Seam-welded, marine-grade aluminum housing
with external, extruded, marine-grade aluminum
heat sink; corrosion resistant
Recessed ceiling mount with 6"aperture
High impact acrylic, polycarbonate or tempered
glass outer lens
High-efficiency symmetric diffusion inner lens
Adjustable mounting brackets
IP65
CCEA
Approved
IP65
ADA
NFPA
101
Lighting Performance Requirements
Kenall’s engineering and design processes focus on performance criteria —such as UL Listings, IP ratings and vibration testing—to
ensure our transportation lighting products deliver outstanding performance. Illuminance criteria for transportation applications
must also consider factors such as task and activity levels, target planes, surface reflectances, energy usage, daylight input,
surveillance needs and visual adaptation. To ensure optimal performance, Kenall’s transportation products align with industry best
practices, including:
• Supporting driver and patron visual perceptions
both day and night
• Maintaining appropriate light levels for the
designated application
• Testing to appropriate performance standards
• Illuminating potential obstacles
• Promoting the safety and security of drivers/patrons
• Durable, sealed construction for corrosion-, shock- and vibration-resistance
• Ingress protection rated to prevent the infiltration of
water and dust
• Ease of installation and maintenance
Best Practices in Transportation Lighting
Luminaires that are Made in the U.S.A.
Testing for Ingress Protection and Vibration
Kenall takes great pride in offering lighting products that are
made in the U.S.A.— a rare find in today’s global economy.
Our state-of-the-art, vertically integrated manufacturing facility
provides extensive production flexibility. When you see the
American flag on our products, it’s your guarantee that they are
designed and manufactured in our U.S.-based facility, using only
first quality, American-made raw materials. It is a commitment
we take very seriously as evidenced by our selection of local
vendors and participation in the Buy American and American
Reinvestment and Recovery Act.
Transportation applications face rigorous environmental
challenges, which makes testing for ingress protection and
vibration resistance best practices. Repeated vibration can cause
significant damage to fixtures that are not built to withstand
such stress. In addition, exposure to the elements and the need
for routine maintenance— typically with high-pressure hoses—
require protection from the ingress of water, bugs, dirt and
debris. Kenall’s state-of-the-art certified safety laboratory and
independent testing ensure that our transportation fixtures will
withstand the rigors of even the most challenging transportation
environments.
Custom Design and Manufacturing Capabilities
To address the varied lighting requirements of the transportation
sector, Kenall is poised to deliver application specific
customizations. Our extensive in-house capabilities enable us to
respond nimbly to even the most complex transportation lighting
projects, controlling the entire development process from fixture
design and engineering, to full-fledged metal fabrication, paint,
and testing. In fact, we’re confident you’ll find our custom
capabilities make us the ideal solution provider for even the
most challenging transportation lighting projects.
Delivering Appropriate Light Levels
Photometric considerations for transportation lighting can be
as diverse and complex as the applications themselves. Kenall
addresses these varied concerns by providing luminaires that
are intelligently designed and engineered to deliver specific
light levels. Through the thoughtful use of optics, distribution
patterns and lamp sources, Kenall balances contrast and
shadows, supports video surveillance, and addresses issues
of uniformity and discomfort glare. By delivering vertical and
horizontal light levels that meet or exceed IES recommendations,
Kenall’s luminaires enhance the safety and security of
pedestrians and patrons.
Transportation Applications
Underpass
Tunnel
Transit Station
Platform/General Area
Corridor/Stairwell
Parking/Surface Lot
www. kenall.com
P: 800-4-Kenall
Email: info@kenall.com
10200 55th Street Kenosha, WI 53144
The Kenall product shown on this page is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
10200 55th Street
Kenosha, WI 53144
262-891-9700
www.kenall.com
©2015 Kenall Mfg. Co.
All rights reserved.
L10067-042415
¯¯