Introduction
Quick Installation Guide
The EnGenius EWS Series Wireless Management Switches provide fullymanaged L2 switching capabilities and PoE+ support while EWS Wireless
Indoor and Outdoor Access Points connected to them can extend a
network to provide connectivity for a growing array of wireless client
devices simplified one-to-many mode configuration and authorized to
access network resources a company’s Internet connection. For efficient
manageability, through an easy-to-navigate, browser-based Graphical User
Interface (GUI), each EWS Switch also offers priority-based configurations
depending on an IT manager’s or network administrator’s need. Together
the EWS Switches and Access Points reach their full potential by allowing
for quick deployment, simplified management and monitoring, and seamless
concurrent upgrades, making the platform ideal for expansive or expanding
business properties and operations.
Package Contents
Mode
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
Link/Act
25F
100/1000Mbps
Speed
Console
PoE Mode
LED Mode
Mode
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
Link/Act
Link/Act
26F
LAN Mode
PoE Max
PoE Mode
LED Mode
1
3
Link/Act
5
7
9
11
13
15
17
19
Mode
21
25F
23
1
3
5
7
9
11
2
4
6
8
10
12
Link/Act
13
15
14
16
100/1000Mbps
17
Speed
Console
PoE Max
PoE Mode
2
Mode
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
Link/Act
25F
Speed
Console
PoE Mode
LED Mode
Reset
100/1000Mbps
4
6
8
10
12
14
16
18
20
22
Link/Act
24
25F
Speed
26F
24
100/1000Mbps
27F
Speed
Console
Link/Act
Speed
Speed
Link/Act
Link/Act
26F
28F
Link/Act
26F
28F
Rack Mount Kit
Wireless Management Switch
1
Link/Act
3
5
7
9
11
13
15
17
19
21
25F
23
Speed
Console
PoE Mode
LED Mode
Speed
Link/Act
Reset
2
4
6
8
10
12
14
16
18
LAN Mode
PoE Mode
20
22
Link/Act
26F
24
LED Mode
Fault
LAN Mode
PoE Max
PoE Mode
LED Mode
1
3
Link/Act
5
7
Mode
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
Link/Act
25F
Speed
Console
PoE Mode
RJ45 Console Cable
LED Mode
100/1000Mbps
11
13
15
17
19
21
25F
23
6
13
15
8
10
17
12
19
14
21
16
18
20
22
25F
23
Speed
Link/Act
Speed
Speed
Link/Act
4
Fault
LAN Mode
PoE Max
PoE Mode
6
LED Mode
8
10
12
1
3
Link/Act
5
14
16
7
9
18
11
20
13
22
15
6
8
10
A) Connect the supplied Power Cord to the EWS Switch and plug the
other end into an electrical outlet. Verify the Power LED indicator is lit
on the EWS Switch. Wait for the EWS Switch to complete boot up. It
might take few minutes to complete the process.
A) Once your computer is on, ensure
that your TCP/IP is set to On or
Enabled. Open Network
Connections and then click Local
Area Connection. Select Internet
Protocol Version 4 (TCP/IPv4).
16
28F
Mode
Console
19
21
25F
23
26F
14
27F
28F
18
20
22
100/1000Mbps
Speed
Speed
Link/Act
Link/Act
Speed
Speed
Link/Act
Link/Act
26F
24
27F
Fault
LAN Mode
PoE Max
PoE Mode
LED Mode
Power Cord
Rack Installation
To mount the Switch onto a rack, attach the included rack mounting
brackets to the Switch. Then secure the mounting brackets to the rack.
The Switch can be mounted in an EIA standard size, 19-inch rack, which
can be placed in a wiring closet with other equipment.
Mode
Power
Mode
Fault
LAN Mode
PoE Max
PoE Mode
LED Mode
1
Link/Act
3
1
3
Link/Act
5
5
7
7
9
9
11
11
13
15
13
17
15
19
17
21
25F
23
19
21
Speed
Link/Act
23
Speed
4
6
8
10
12
14
16
18
20
22
25F
15
17
19
21
25F
23
4
6
8
10
12
14
16
18
20
22
100/1000Mbps
Speed
Speed
Link/Act
Link/Act
Speed
Speed
Link/Act
26F
24
27F
28F
•Do not place heavy objects on the Switch.
•Do not expose the Switch to direct sunlight.
•Make sure that there is adequate space (at least 2 inches) for proper heat
dissipation around the Switch. Please do not cover the ventilation holes on
all sides of the Switch.
•Install the Switch in a fairly cool and dry environment.
•Install the Switch in a site free from strong electromagnetic source.
•Visually inspect the power jack and make sure that it is fully secured to the
power Cord.
PoE Max
PoE Mode
Reset
2
4
6
8
10
12
14
16
18
20
22
LAN Mode
PoE Max
PoE Mode
LED Mode
5
7
9
11
13
15
17
19
21
25F
23
2
4
6
8
10
12
14
16
18
20
22
100/1000Mbps
Speed
Speed
Link/Act
Link/Act
Speed
Speed
Link/Act
Reset
Link/Act
26F
24
27F
28F
EWS AP
Speed
Speed
28F
Link/Act
Speed
Speed
Link/Act
Link/Act
26F
24
28F
Mode
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
Link/Act
25F
Speed
Console
Mode
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
Link/Act
25F
100/1000Mbps
Speed
Console
PoE Mode
LED Mode
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
Link/Act
Link/Act
26F
C
21
23
22
24
25F
LAN Mode
PoE Mode
LED Mode
Speed
Link/Act
Reset
28F
27F
Link/Act
Speed
Fault
PoE Max
B
100/1000Mbps
Link/Act
26F
Speed
Link/Act
Power
28F
Speed
Link/Act
Reset
Speed
Speed
Link/Act
Reset
Console
Link/Act
Speed
LAN Mode
PoE Max
Mode
LED Mode
Speed
Link/Act
Power
Fault
27F
PoE Mode
27F
Link/Act
Speed
LAN Mode
PoE Max
100/1000Mbps
Speed
Link/Act
Power
Fault
B) If your computer is already on a
network, ensure that you have
set it to a Static IP Address on the
interface.
(Example: 192.168.1.10 and the
Subnet Mask address as
255.255.255.0)
Link/Act
26F
28F
B
Console
1
Link/Act
Fault
LAN Mode
PoE Max
PoE Mode
LED Mode
1
Link/Act
LAN Mode
PoE Mode
LED
Per Device
5
7
9
11
13
15
17
19
21
25F
23
Speed
LED Mode
6
8
10
12
14
16
18
20
22
24
LED
Color
Status
Power
Green
Solid Light
Power On
Light Off
Power Off
Amber
Solid Light
Light Off
PoE Max
Amber
Solid Light
Light Off
27F
Link/Act
Error
Normal Behavior
6
1
No additional devices can be
powered on via PoE.
17
19
10
5
7
12
9
14
11
13
15
16
17
18
19
21
21
20
25F
23
22
25F
23
Speed
Link/Act
Speed
Speed
27F
Link/Act
26F
24
100/1000Mbps
100/1000Mbps
Speed
Link/Act
28F
27F
Technical Support
Power
Fault
LAN Mode
PoE Max
PoE Mode
LED Mode
Speed
Speed
Link/Act
Link/Act
Speed
Speed
Link/Act
Reset
4
6
8
10
12
14
16
18
20
22
24
Link/Act
26F
28F
Country of Purchase
Service Center
Service Information
North America
Canada
rma@engeniuscanada.com
Toll Free: (+1) 888 397 2788
Local: (+1) 905 940 8181
Mode
Console
Additional devices may still be
added
PoE Mode
Green
Solid Light
Select LED Mode to “PoE Mode”
LAN Mode
Green
Solid Light
A valid 1000 Mbps link is
established on the port.
Amber
Solid Light
A valid 100 Mbps link is established
on the port.
Off
Light Off
A valid 10 Mbps link is established
on the port.
Green
Solid Light
Power is being supplied from the
PoE Switch.
Amber
Solid Light
Off
Light Off
Green
Solid Light
Notes
1
Link/Act
3
5
7
9
11
13
15
17
19
21
Fault
LAN Mode
PoE Max
PoE Mode
LED Mode
Reset
2
4
6
8
10
12
14
16
18
20
22
25F
23
Power
24
100/1000Mbps
Speed
Speed
Link/Act
Link/Act
Speed
Speed
Link/Act
Link/Act
26F
27F
28F
www.engeniustech.com
Los Angeles, USA
support@engeniustech.com
Toll Free: (+1) 888 735 7888
Local: (+1) 714 432 8668
Central & South America
Miami, USA
miamisupport@engeniustech.com
Miami: (+1) 305 887 7378
Sao Paulo, Brazil: (+55) 11 3957 0303
D.F, Mexico: (+52) 55 1163 8894
Europe
Netherlands
support@engeniusnetworks.eu
(+31) 40 8200 887
Africa
CIS
Middle East
Russia
Dubai, UAE
support@engenius-me.com
Toll Free:
U.A.E.:800-EnGenius
800-364-364-87
General: (+971) 4 357 5599
Asia
Oceania
Singapore
www.engeniustech.com.sg/e_warranty_form
techsupport@engeniustech.com.sg
Toll Free:
Singapore: 1800 364 3648
Others
Taiwan, R.O.C
technology@senao.com
es.engeniustech.com
pg.engeniustech.com
www.engeniusnetworks.eu
Error
No Power
A valid link is established on the port
Blinking
Packet transmission on the port
Off
No link is established on the port
Green
Solid Light
A valid 1000 Mbps link is
established on the port.
Amber
Solid Light
A valid 100 Mbps link is established
on the port.
Off
Light Off
No link is established on the port
Green
Solid Light
A valid link is established on the
port
Blinking
Packet transmission on the port
Off
8
3
Link/Act
www.engeniuscanada.com
Select LED Mode to “Ethernet Mode”
Link/Act
15
Meaning
Solid Light
Speed
13
28F
Green
Link/Act
11
Link/Act
26F
LAN Mode
PoE Mode
9
Speed
Link/Act
4
100/1000Mbps
Speed
Link/Act
Reset
LED
Indicator
Fault
LED
Per Copper Port
3
7
Link/Act
4
2
Mode
Speed
Fault
5
Reset
Console
Power
PoE Max
3
Power
Mode
2
Managing Wireless Management Switch
For further Switch configurations, click on Switch at the top left of the
dash board. Refer to the Wireless Management Switch User Manual for more
information on configuration settings.
3
Link/Act
C
LED Guide
Managing Wireless Managed AP(s)
The Managed AP(s) that are successfully being managed will be listed
under the Managed AP(s) list. Click on the Device Name to access to its
Configuration settings. Please refer to the Wireless Management Switch
User Manual for more information on configuration settings.
1
Power
Fault
Link/Act
26F
24
LAN Mode
LED Mode
Mode
Console
27F
100/1000Mbps
Speed
Link/Act
Reset
Link/Act
Fault
LED
Per SFP Port
C) You will be prompted to enter an IP Address range for the Managed AP(s).
- Select DHCP for an IP Address to be assigned automatically if there is
a DHCP server in the network.
- Select Static to enter the IP
Address, Subnet Mask, Gateway,
and DNS Server manually.
Click Apply to continue.
13
Link/Act
27F
100/1000Mbps
Speed
Link/Act
Power
B) A login screen will appear. By default, username is admin and the
password is password. Enter the current username and password of
the Wireless Management Switch and then click Login.
C) The EnGenius Wireless Management Switch User Interface will appear.
Make sure the Controller State is set to Enabled.
11
B) Connect one end of a Category 5/6 Ethernet cable into the Gigabit
(10/100/1000) Ethernet port on the Switch’s front panel and the
other end to the Ethernet Port on the computer. Verify that the LED
on the Ethernet port of the Switch is green.
C) Connect the EWS AP(s) to the EWS Switch. Verify that the LED on the
Ethernet port(s) of the EWS Switch is green.
28F
4 Management Switch Setup 5 Device Management
B) To manage the Managed AP(s), select the desired
Managed AP(s) by checking the boxes and click Add.
9
Reset
2
* Your model number may
be different in the web
browser interface.
7
27F
Mode
Locating Wireless Managed AP(s)
A) Go to Device Management and select Access Points. All Managed
AP(s) connected to the same network as the Wireless Management
Switch will appear on the right side of the screen, under the Access
Point AP(s) Detected list.
5
28F
Console
A) Open a web browser on your computer. In the address bar of the web
browser, enter 192.168.0.239 and enter.
3
Link/Act
2
Link/Act
26F
1
Power
Link/Act
17
24
12
Speed
Link/Act
27F
Reset
4
Speed
Link/Act
Speed
Link/Act
26F
100/1000Mbps
Speed
Link/Act
100/1000Mbps
Speed
Link/Act
24
Power
2
Wireless Management L2 Switch
9
Speed
Link/Act
Reset
7
Link/Act
Speed
LAN Mode
PoE Max
3 IP Address Configuration
Speed
Link/Act
Power
Fault
5
4
2
Console
version l.0
11
Mode
2
Console
Console
Open the shipping carton and carefully unpack its contents. Please see
the Packaging Contents (right) to make sure all the items are present and
undamaged. Please note that the model you have purchased may appear
slightly different. If any item is missing or damaged, please contact your
local EnGenius reseller for replacement.
9
Reset
28F
Before you connect
Unpacking
3
Link/Act
Reset
Power
27F
Link/Act
Speed
LAN Mode
PoE Max
100/1000Mbps
Speed
Link/Act
Power
Fault
Fault
PoE Max
Mode
Console
Mode
1
Power
2
28F
27F
Speed
Link/Act
Reset
23
22
Speed
18
2 Connecting to the Switch
Installing the Switch on a Flat Surface
Install the Switch on a flat surface such as a desktop or shelf, attach the
rubber feet on the bottom at each corner of the Switch. The rubber feet
cushion the Switch from shock or vibration, and secure space between
devices when stacking.
Mode
21
20
Link/Act
Speed
Link/Act
Link/Act
Speed
LAN Mode
PoE Max
LED Mode
Speed
Link/Act
Power
Fault
LAN Mode
PoE Mode
Reset
28F
27F
19
Link/Act
Fault
PoE Max
LAN Mode
LED Mode
Speed
Link/Act
26F
Speed
Link/Act
Power
Power
Fault
1 Switch Installation
27F
Speed
Link/Act
Reset
100/1000Mbps
Link/Act
Speed
Fault
28F
Mode
Console
25F
Speed
Link/Act
Power
Speed
Link/Act
Reset
Console
Link/Act
Speed
LAN Mode
PoE Max
27F
Speed
Link/Act
Power
Fault
No link is established on the port
www.engenius-me.com
www.engeniustech.com.sg
www.engeniusnetworks.com
Maximum data rates are based on IEEE 802.3ab standards. Actual throughput and range
may vary depending on distance between devices or traffic and bandwidth load in the
network. Features and specifications subject to change without notice. Trademarks and
registered trademarks are the property of their respective owners. For United States of
America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved. Compliant with
FCC - This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.