perfectControl is a motorised calibrating and adjusting
unit for torque wrenches. Quick to set up, quick to connect
and easy to operate using just three buttons - these and
other features make using the perfectControl unit a
simple matter. Thanks to the power
drive and intelligent control system,
this motorised calibrating and
adjusting unit considerably
reduces the amount of effort
and time required for
calibrations.
And that's not all: the spindle's
precision bearing and the fine
motor control system enable
bad readings resulting from
operator error to be avoided to
a large extent.
Measurement is possible without moving the point
of application of force.
91 97 92 07
The tool to be calibrated remains in the same position
throughout the loading process. Thanks to a low-friction
linear ball bearing, the torque wrench is automatically
levelled as it is placed in the unit.
The design of the square sensor mounts reduces the
lateral forces acting on the transducer, which further
optimises the accuracy of the readings. The overload
protection system prevents damage to the tools being
calibrated and the transducer.
Flexible transducer change
Quick and easy change of transducers thanks to the
QuickRelease system makes it possible to calibrate a
wide range of tools.
Modular design
perfectControl can be adapted to meet each end user's
needs. Extensions with additional components are
possible any time. The extension system is easy to
attach thanks to its accurate fit. It can be fixed in place
quickly using the screw fasteners integrated in the
construction.
The unit can be partly dismantled for transport purposes.
Simple operation
The controls and automatic speed adjustment coupled
with the single-handed clamp mechanism for the counterbearing make operating the equipment an easy matter.
The readings are transferred via a USB interface from
the transducer to a PC where they can then be processed
(e.g. to print a calibration certificate) and archived with
the "as found" and "as left" calibrations.
The unit can be used for calibrations in both clockwise
and anticlockwise directions by selecting the appropriate
buttons. Fully automated processes can be programmed
for adjustments and calibrations.
perfectControl can be checked on-site using a reference
torque wrench.
Software included
The adjustment mode for torque wrenches and
transducers is an integral part of the Torkmaster
software.
Transducers can, as an option, also be adjusted.
This function requires an additional licence to upgrade
the software to Torkmaster Premium. In addition,
customers will require a corresponding reference torque
wrench, 7770–100/–1000. This functionality is currently
only available for STAHLWILLE transducers.
7791-1
Extension section
Included with product:
7759-2 USB hub,
jack cable and
Torkmaster software
7787-7789
Square drive adapter
734K Calibrating square
drive insert tool
7721-7723
Transducer
Printed in Germany – Copyright by EDUARD WILLE GmbH & Co. KG, Wuppertal – 0,5/07/11 PAF
The calibration mode supports DIN EN ISO 6789: 2003
in numerous languages. Additional standards and works
standards on request.