3 CONDUCTOR 14 AWG + 1 CONDUCTOR 18 AWG COMPOSITE LEVEL 1 ELECTRIC VEHICLE CABLE Component I (Qty=3) COLOR CODE Component # Component Insulation/Tracer Assignment Color Component II (Qty=1) 1 4 1 I White Power 2 I Black Power 3 I Green/Yellow Ground 4 II Blue Control Pilot Filler 3 2 Binder Jacket ELECTRICAL CHARACTERISTICS Component I – 14 AWG Singles Ampacity: 16 Amps @ 30°C Ambient Conductor DC Resistance: 2.5 Ohms/1000 ft [8.2 Ohms/km] Nominal @ 20°C CONSTRUCTION Component I – 14 AWG Singles Conductor: 14 AWG 7x24/36 Bare Copper, 0.081 Inch [2.06 mm] Diameter Component II – 18 AWG Control Pilot Conductor Insulation: 0.047 Inches [1.19 mm] of PVC, 0.175 Inch [4.44 mm] Diameter Ampacity: 7 Amps @ 30°C Ambient Conductor DC Resistance: 6.5 Ohms/1000 ft [21 Ohms/km] Nominal @ 20°C Component II – 18 AWG Control Pilot Conductor PHYSICAL CHARACTERISTICS Conductor: 18 AWG 41/34 Bare Copper, 0.044 Inch [1.12 mm] Diameter Insulation: 0.032 Inches [0.81 mm] of PVC, 0.108 Inch [2.74 mm] Diameter Temperature Rating: -30°C to +90°C Bend Radius: 7 x Cable Diameter, Minimum Final Assembly Core: Fibrillated Polypropylene Filler SAFETY CERTIFICATION Layer 1: 3 Component I (#1-3) and 1 Component II (#4) Cabled Together with Fibrillated Polypropylene Filler In Each Interstice Binder: Non-Woven Tape, 25% Overlap UL Listing: Type EVT as specified in Article 400 of the National Electrical Code Jacket: 0.084 Inches [2.13 mm] of Super Flexible PVC, Color – Blue RoHS Compliance: In Accordance to European Directive 2002/95/EC, Issue Diameter: 0.565 Inches [14.35 mm] Nominal 13.2.2003 Print Legend (Black Ink): “MADISON CABLE (UL) TYPE EVT 90°C 600V 3C/14 AWG (2.08 mm2) AND 1C/18 AWG (0.824 mm2) VW-1 RoHS COMPLIANT {Date Code}1” 1 Date code is a 4-digit code with the first 2 digits identifying the calendar week and the last 2 digits identifying the calendar year of manufacture, printed on the opposite side of the legend. Example - 0206 for cable manufactured the second week of 2006. 1 2 3 Spec Number: 102-0791 Part Number: 04TZQLF004 Customer: Customer #: 04/08/11 06/03/11 11/28/11 RL RL RL REVISION HISTORY Initial Release Added Part Number Revised OD’s and Temp. Rating Prepared By: R. Lemos Reviewed By: K. Arsenault Page K. Chagnon 1 of 1 Users should evaluate the suitability of this product for their application. Contact factory for latest revision of specification. Tyco Electronics reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to the Buyer. Form AP-03A Issue 10