HW DATE JOB NAME TYPE Applications Applications Features • Steel housing with white enamel finish • Welded end caps • Single piece reflectors for 8’ lamps • Designed for surface, stem or chain mounting • Uses T8, T8HO, T5, T5HO, T12 or T12HO lamps Series Size Lamps Watts 4FT 8FT 1 2 3 4 32W T8 48W T8HO 28W T5 54W T5HO 40W T12 • Warehouses • Manufacturing Facilities • Parking Garages • Utility Areas • Storage Rooms Voltage Options 120 277 UNV (T12 dedicated voltage only) EM1-EM Pack 1-Lamp EM2-EM Pack 2-Lamp DB-Dimming Ballast SC-Separate Circuit HB-1.15 BF Ballast MS-Motion Sensor WG-Wireguard US-White Reflector 10% Uplight Slots CR87-Chrome Reflector 87% Reflectivity CR94-Chrome Reflector 94% Reflectivity CUS-Chrome Reflector 10% Uplight Slots VH-”V” Hangers HW 48W T12HO 59W T8 86W T8HO 96WT12 96W T12HO 8’ Tandem uses 4’ lamps (ie-32W-8’) Ordering Example: HW-254T5HO-UNV-EM Details Application Features: Specification grade welded industrial fixture with white symmetric reflector. For use in indoor applications where a T8, T8HO, T5, T5HO, T12, or T12 HO industrial fixture with welded ends and low cost is required. Available in 4’ and 8’ lengths. Construction: Die and brake formed, 20 ga. pre-painted white cold rolled steel housing. Sufficient knock-outs provided for convenience outlet, pull switch and flexible conduit attachment. Finish: Pre-painted high reflectance white. Approvals: Union made, UL listed, and manufactured in the US. Mounting: Fixtures designed for surface, stem or chain hanging. Optics: High reflectance white reflector. Options: Emergency Battery Backup, Dimming Ballast, Separate Circuit, High Ballast Factor Ballast, Motion Sensor, Wireguard, White Reflector 10% Uplight Slots, Chrome Reflector 87% Reflectivity, Chrome Reflector 94% Reflectivity, Chrome Reflector 10% Uplight Slots, “V” Hangers. Electrical: Electronic ballasts are class P, thermally protected. January 2013 Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetnj.com HW DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE. ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.