CH1.5
18" Heavy Duty Narrow Channel / 1-Lamp T12
Project Information
Project Name
Type
Catalog No.
Date
Construction
Heavy gauge cold rolled steel housings fully
assembled. Channel cover provides room-side
access to ballast.
Finish
Features
•
•
•
•
•
•
•
White painted parts are treated with a five stage
phosphate bonding process and finished with a high
reflectance baked enamel.
Available 18"
Heavy die formed steel channel
Snap-on cover. No tools required. No hardware to lose
Rotary lock lampholders for positive lamp contact
Pre-heat fixtures have starters
Channel ends double as joiners
Individual or row mounting. Surface or suspended
Electrical
Standard class “P”, thermally protected, autoresetting HPF ballast, sound rated A. All ballast
leads extend a minimum of 6" through access
location. NEC/CEC-compliant ballast disconnect is
standard.
Ordering Information
CH
Model
CH Heavy Duty
Narrow Channel
Certification
All luminaires are built to UL 1598 standards and
bear appropriate UL and cUL or CSA labels. Damp
location labeling is standard.
1.5
Size
1.5 18" (1.5')
Example CH2-115-120-GLR
1
–
No. of Lamps
1 One
15
120
–
Lamp Type
Ballast
15 18", T12: 15 Watt
Blank High Power Factor
For a specific ballast vendor,
show as option.
Voltage
120 120V
–
Options
GLR Fast Blow Fuse
GMF Slow Blow Fuse
PAF Paint After Fabrication
Accessories
(Order Separately)
ITB4 Hanger for close
mounting on a T-Bar
ceiling
CHRA2 2' Asymmetric
Reflector
CHR2 2', Symmetric Reflector
CS2 Maintains 11/2" space
when mounted to
outlet box
CHWG2 2' Wire Guard
For complete list of options and accessories, see options and accessories section.
Page 1/2 Rev. 03/22/13
© 2013 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
Striplights / CH1.5
CH1.5
18" Heavy Duty Narrow Channel / 1-Lamp T12
Photometric Data – contact factory
Dimensional Data
7/16" / 7/8" DIA.
CONCENTRIC KNOCKOUTS
21/2"
61/2"
3"
24"
18"
21/2"
91/2"
113/16"
END PLATE
19/16"
37/16"
A - 7/8" Diameter Knockout
Mounting Data
ITB4
Accessory Reflectors
CHRA2
CHR2
NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification.
Page 2/2 Rev. 03/22/13
© 2013 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
Striplights / CH1.5