IMPORTANT INFORMATION FOR THE INSTALLER
AND THE OWNER
INCLUDED: THERMOMASSEUR® INSTALLATION
USING THE MIA® SERIES CONTROLS
The quest for your wellness™
IMPORTANT: TO BE KEPT FOR THE OWNER
OWNER’S MANUAL
YOUR THERAPEUTIC BATH, A KEY COMPONENT
FOR CREATING YOUR INSPERIENCE BATHROOMTM
ESSENCIATM
AMMA®
TMU
THALASSA
THERMAL
VEDANA®
TEMAZKAL®
TEKURA®
AYOURA®
AZUR
ESPALIER
BALNEO®
RELAXATION
CHAIR &
FOOTREST
BASA®
ORIGAMI®
THERAPEUTIC BATHS
TM All rights reserved.
ELEGANCIA®
CARE UNITS
MERIDIAN®
UNIVERSAL
LEGREST
UNIVERSAL
MASSAGE
TABLE
COMPLEMENTARY
PRODUCTS
OWN E R’ S MAN U A L
TABLE OF CONTENTS
SAFETY INSTRUCTIONS
THERMOMASSEUR
4
®
PARTS AND TOOLS
5
SITE PREPARATION
6
®
THERMOMASSEUR INSTALLATION
7-9
PLUMBING INSTALLATION
TM
TEKURA
NEW
10 - 12
INSTALLING/CHANGING ACCESSORIES
13 - 16
BALNEO®, AYOURA®, AMMA® AND ORIGAMI FREESTANDING
PARTS AND TOOLS
17
SITE PREPARATION
18 - 19
INSTALLATION
20 - 25
TURBINE
TECHNICAL SPECIFICATIONS
26
ELECTRICAL INSTALLATION
27 - 29
REMOTE MOUNTING
30 - 34
SKIRTS
GENERAL INSTRUCTIONS
35
PARTS AND TOOLS
36
INSTALLATION
37 - 53
THE MIA® SERIES CONTROLS
INSTALLATION
54
USER GUIDE
55 - 65
MAINTENANCE
66 - 68
TROUBLESHOOTING
69 - 70
WARRANTY
71 - 72
DRILLING TEMPLATES
73 - 76
956, chemin Olivier
Saint-Nicolas (Québec)
G7A 2N1
T 418.831.7701
1.800.463.2187
F 418.831.6623
1.800.382.8587
info@bainultra.com
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
3
O W N E R’S MAN U AL | SAFET Y I N ST RUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTROCUTION, OR PERSONAL INJURY
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING
s2ISKOFHYPERTHERMIAPEOPLEUSINGMEDICATIONANDORHAVINGANADVERSEMEDICALHISTORYSHOULDCONSULTAPHYSICIANBEFOREUSINGA
Hydro-thermo massageTM bathtub equipped with a heater.
s2ISKOFHYPERTHERMIAANDPOSSIBLEDROWNINGDONOTUSEA(YDROTHERMOMASSAGETMBATHTUBEQUIPPEDWITHHEATERIMMEDIATELYFOLLOWing strenuous exercise.
s2ISKOFFETALINJURYPREGNANTORPOSSIBLYPREGNANTWOMENSHOULDCONSULTAPHYSICIANBEFOREUSINGA(YDROTHERMOMASSAGETM bathtub
equipped with a heater.
s2ISKOFACCIDENTALINJURYORDROWNINGDONOTUSEDRUGSORALCOHOLBEFOREORDURINGTHEUSEOFA(YDROTHERMOMASSAGETM bathtub
equipped with a heater.
s5SETHISUNITONLYFORITSINTENDEDPURPOSESORASDESCRIBEDINTHISMANUAL5SEONLYATTACHMENTSRECOMMENDEDBYTHEMANUFACTURER
s2ISKOFHYPERTHERMIAANDPOSSIBLEDROWNINGWATERTEMPERATUREINEXCESSOF100ºF (38ºC) MAYBEINJURIOUSTOYOURHEALTH#HECKAND
ADJUSTTEMPERATUREBEFOREUSE
s4OREDUCETHERISKOFINJURYASWITHANYOTHERCONVENTIONALBATHDONOTALLOWCHILDRENORPHYSICALLYIMPAIREDPEOPLETOUSETHISUNIT
unless they are closely supervised at all times.
s4OAVOIDINJURYEXERCISECAREWHENENTERINGOREXITINGTHE4HERMOMASSEUR®.
RISK OF ELECTRICAL SHOCK
s$ISCONNECTELECTRICPOWERBEFORESERVICING
s$ONOTPERMITELECTRICALAPPLIANCESHAIRDRYERLAMPTELEPHONERADIOTELEVISIONETCWITHIN5’ (1.5 m) OFTHE4HERMOMASSEUR®.
s"EFOREUSINGTHE4HERMOMASSEUR®ITSEXTERIORCONSTRUCTIONPODIUMORSKIRTINGSHOULDBElNISHEDSOTHATABATHERCANNOTACCIDENTALLY
come in contact with electrical components (turbine and power module).
s&ORINDOORUSEONLY
%,%#42)#!,#/..%#4)/.3
s.EVERDROPORINSERTOBJECTSINTOANYOPENINGS
s4HE4HERMOMASSEUR® must be connected only to a supply circuit that is protected by A 15 amp class AGROUNDFAULTCIRCUITINTERRUPTER
(GFCI)FORBATHSWITH1HEATEDBACKRESTANDA 20 amp (GFCI)FORBATHSWITH2 heated backrests OFTHE!MMA® series. This interrupter
ISSUPPLIEDBYACERTIlEDELECTRICIANANDMUSTBETESTEDONAREGULARBASISINACCORDANCEWITHMANUFACTURERSINSTRUCTIONS4HE'&#)
GROUNDMUSTBECONNECTED)FDEFECTIVEDONOTUSETHE4HERMOMASSEUR®. Disconnect immediately and call a certified electrician.
s5SE12 AWG ORGREATERCOPPERCONDUCTORSTHATRESISTTEMPERATURESOFATLEAST194ºF (90ºC).
s#ANADAONLYFORPERMANENTLYCONNECTEDUNITS!GREENCOLOREDTERMINALORAWIRECONNECTORMARKEDGGRGROUNDORGROUNDINGIS
PROVIDEDWITHINTHETERMINALCOMPARTMENTNOTAPPLICABLEIFUNITSUPPLIEDWITHANELECTRICPLUG4OREDUCETHERISKOFELECTROCUTION
CONNECTTHISTERMINALORCONNECTORTOTHEGROUNDINGTERMINALOFYOURELECTRICSERVICEORSUPPLYPANELWITHCONDUCTOREQUIVALENTINSIZE
to the circuit conductors supplying the equipment and be 12 AWG or more.
s!LLELECTRICALCONNECTIONSMUSTBECARRIEDOUTBYACERTIlEDELECTRICIANANDMUSTRESPECTFEDERALPROVINCIALSTATEANDLOCALBUILDING
codes and regulations.
s)NSTALLINACCORDANCEWITHMANUFACTURERSINSTALLATIONINSTRUCTIONS
4
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
T H E RMOMASS EU R ® - PA R TS A N D TOOL S
PARTS AND TOOL
A. PARTS AND TOOLS
A-1
24” Level
A-2
24” Square
A-3
#AULKINGGUN
A-4
Pencil
A-5
Hole saw
A-6
1/16” drill bit
A-2
A-1
A-3
TILE FLANGE INSTALLATION
A-7
Miter box (angle cutter)
A-8
Fine tooth saw
A-9
$OUBLEFACETAPE
A-4
MOLDED TILE FLANGE INSTALLATION
A-10
Drill
A-11
11/64” drill bit
A-12
82° routing bit
A-13
Screws
A-14
Appropriate screwdriver
A-5
A-6
A-8
A-7
A-9
SKIRT INSTALLATION
3EESKIRTSECTION
OTHER NECESSARY ITEMS
s7OODSHIMS
A-10
A-11
A-12
A-13
A-14
s3ILICONE
IMPORTANT
s "EFORESTARTINGINSTALLATIONENSURETHATPARTSRECEIVEDMATCHYOURORDER&ORALLQUESTIONSCALL
BainUltra® at 1 800 463-2187.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
5
TH ER MO MASSEUR ®
THERMOMASSEUR®
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
TH ER MO MASSEUR ®
T H E RMO MA S S E U R ® - S I T E P RE PA RATIO N
THERMOMASSEUR®
SITE PREPARATION
FAUCET INSTALLATION
s3EEFAUCETMANUFACTURERSTECHNICALSPECIlCATIONS FORZONINGANDPLANWATERSUPPLYACCORDINGLY
s0OSITIONDRAINACCORDINGTOMANUFACTURERS
specifications.
BEDDING
There is a technical specification sheet for each
BainUltra® ThermoMasseur® which includes
information such as necessary dimensions of site
before installation. If you do not already have
the technical specifications, download from
the BainUltra® site at: www.bainultra.com or
call us at: 1 800 463-2187.
"EFOREINSTALLINGENSURETHATTHEmOORUNDERNEATH
the bath can support 1,500 lbs (680 kg). The bath
MAYSITDIRECTLYONTHEmOOR(OWEVERTHEBATHMAY
ALSOBEINSTALLEDONABEDOFCONCRETE&ORTHISTYPE
OFINSTALLATIONITISRECOMMENDEDTHATYOUINSULATE
THECONCRETEBETWEENTWOSHEETSOFPLASTICONEON
mOORANDTHEOTHERUNDERNEATHBATH
SERVICE ACCESS AND VENTILATION
s!SERVICEACCESSISNECESSARY-INIMUMDIMENSIONS
AREvXvCMXCMTOPROPERLYREACHALL
ELECTRICALCOMPONENTSOFTHESYSTEM
s!NAIRVENTISALSONECESSARY-INIMUMDIMENSIONS AREvXvCMXCMTOENSUREPROPER
FUNCTIONINGOFTHETURBINE4HESERVICEACCESSPANEL
ISOFTENTHEBESTPLACETOINSTALLTHEAIRVENT
REMOTE MOUNTING
All ThermoMasseur®COMPONENTSAREFACTORYINSTALLED
)FFORPRACTICALORACCESSIBILITYREASONSTHETURBINEAND
the InMix (Chromatherapy) module must be moved,
FOLLOWRECOMMENDATIONSOUTLINEDINTURBINE REMOTE MOUNTINGSECTIONOFTHISMANUAL
WARNING
6
s4HESPACESURROUNDINGTHETURBINEAIRINTAKEMUSTBELARGEENOUGHANDFREEOFDEBRISFORPROPER
AIRmOWANDBEATATEMPERATUREBETWEEN72ºF (20ºC) and 86ºF (30ºC)FOROPTIMALPERFORMANCE
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
T H E RMOMASS EU R ® - I N STA L L ATI ON
INSTALLATION
)NSTALLTOPERMITACCESSFORSERVICING
4HEFOLLOWINGINSTRUCTIONSAPPLYTOBOTHRECTANGULAR
and corner baths.
1. ALCOVE INSTALLATION (BETWEEN
2 OR 3 WALLS)
1-1
0LACELEVELLENGTHWISEONDECKINGOFTHE
ThermoMasseur®ANDADJUSTBYPLACING
shims under ThermoMasseur® where
necessary. Repeat exercise width wise on
the bath. Glue shims in place with a drop
OFSILICONE
-ARKPOSITIONOFWOODENSUPPORTSTOBE
attached to the wall by tracing a line
UNDERNEATHTHEDECKOFTHE4HERMO-ASSEUR®.
1-3
Pull the ThermoMasseur® out.
1-4
Align the wooden supports [at least 1 1/2”
CMTHICK=WITHMARKINGSANDNAILINTO
PLACEONTHEWALLSTUDS0LANFORNOTCHON
WOODENSUPPORTSFORINSTALLATIONOFASKIRT
IFNECESSARY
1-5
Reposition ThermoMasseur® ANDVERIFYTHAT
it is level.
1-2
The BainUltra® ThermoMasseur® is almost as easy
to install as a conventional bath. The following
instructions outline steps to follow for the main
types of installation.
1-2
1-1
1-4
1 - 11/2"
[2.5 à 3.8 cm]
1-3
A
1-5
IMPORTANT
s4HE4HERMOMASSEUR® must sit entirely on its base with the lip supported by a wooden structure.
s4HE4HERMOMASSEUR® must be level.
s4HE4HERMOMASSEUR®ISMOLDEDWITHANINTEGRATEDSLOPETOWARDSTHEDRAIN)FDECKINGAROUND
the Thermomasseur® is level, the bath will drain accordingly.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
7
TH ER MO MASSEUR ®
THERMOMASSEUR®
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
TH ER MO MASSEUR ®
T H E RMO MA S S E U R ® - I NS TA L LATIO N
1. ALCOVE INSTALLATION (BETWEEN
2 OR 3 WALLS)(NEXT)
1-6
1-7
Bath Deck
4OlNISHTHEFRONTOFTHEBATHWITHCERAMIC
tile or other materials), a 2” x 3” (5 cm x
7.6 cm) structure is necessary to support
the ThermoMasseur®. Place underneath
THEDECK(A)ORTHEEDGEOFTHEBATH(B)
depending on the desired finish.
BainUltra®SKIRTINSTALLATIONrequires a single
2” x 3” (5 cm x 7.6 cm) support in the
FRONTOFTHE4HERMO-ASSEUR®. Tilt the base
OFTHESUPPORTvCMINWARDSAND
UPWARDS0LACETHETOPOFTHESUPPORT
BEHINDTHETWORETAINERBLOCKS(D)OFTHE
SKIRTPLACEDUNDERNEATHTHELIPOFTHE
ThermoMasseur® (C).
Structure
2" x 3"
[5 cm x 7.6 cm]
Bath Lip
1-6
Structure
2" x 3"
[5 cm x 7.6 cm]
)NSTRUCTIONSFORINSTALLINGSKIRTSANDRETAINERBLOCKS
NOTFACTORYINSTALLEDMAYBEFOUNDINTHISMANUAL
in the SKIRT section.
Bath Deck
Structure
2" x 3"
[5 cm x 7.6 cm]
1-7
3” [7.6 cm]
IMPORTANT
8
s)FTHE4HERMOMASSEUR®ANDTHESKIRTWERENOTORDEREDTOGETHERTHERETAINERBLOCKSWILLNOTBE
on the bath. As such, leave a 1/4” (0.6 cm) between the 2” x 3” (5 cm x 7.6 cm) support
STRUCTUREANDTHELIPOFTHEBATHSOTHATTHETOPOFTHESKIRTMAYBEINSERTEDUNDERTHEDECK
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
T H E RMOMASS EU R ® - I N STA L L ATI ON
TH ER MO MASSEUR ®
TILE FLANGE
!TILEmANGEISRECOMMENDEDFORALCOVEINSTALLATIONS
(between 2 or 3 walls). Some bath models may
INCLUDEAMOLDEDTILEmANGE4ILEmANGESFOROTHER
MODELSARENOTINSTALLEDORMAYBEFACTORYINSTALLED
-OLDEDTILEmANGESECURETHEmANGETOTHEWALL
WHILESUPPORTINGFROMBENEATH
&ACTORYORCUSTOMERINSTALLEDTILEmANGE
.OTILEmANGE
2. TILE FLANGE INSTALLATION
2-1
Using a miter box (angle cutter) and a
lNETOOTHSAWCUTPIECESOFTILEmANGE
to desired lengths. Cut 45° angles where
necessary.
2-2
Apply double-sided tape along the entire
LENGTHOFTHEmANGE3TICKTHETILEmANGE
TOTHEDECK
2-3
Apply silicone.
IMPORTANT
s!FACTORYINSTALLEDTILEmANGEDOESNOTREPLACEASILICONEJOINTBETWEENTILINGANDTHE4HERMOMASSEUR®.
s4HESURFACESTHATCOMEINTOCONTACTWITHDOUBLESIDEDTAPEMUSTBECLEAN
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
9
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
TH ER MO MASSEUR ®
T H E RMO MA S S E U R ® - P L U MB I NG I NS TA L L ATIO N
THERMOMASSEUR®
PLUMBING INSTALLATION
DRAIN, OVERFLOW, AND PLUMBING
All plumbing installations must be carried out by a
certified plumber. Installation of a ThermoMasseur®
is the same as for regular acrylic baths. Pay close
attention to the following when installing the
ThermoMasseur®:
All BainUltra® ThermoMasseurs® require a 20” drain
ANDOVERmOWSETEXCEPTFORTHEFOLLOWINGMODELS
s4HE!MMA!MMA/VALThermal CN2K,
and Thermal CR2K which require a 27” set.
s4HE!YOURA® drop-in model which requires with set
OFADJUSTABLELENGTH
s4HE!YOURA®FREESTANDINGMODELWHICHHASA
FACTORYPREINSTALLEDSET
DRILLING ACRYLIC OR LYPTUS WOOD FOR
FAUCETS
1/4”
[0.6 cm]
4HEDRAINANDOVERmOWOPENINGSAREFACTORYDRILLED
(OWEVERDRILLINGMAYBENECESSARYTOINSTALLFAUCETS
4HISDRILLINGOFACRYLICORWOODISAVERYDELICATE
OPERATIONESPECIALLYFOR5#3"AIN5LTRA® Coloration
System) ThermoMasseurs®ANDFORTHEACRYLICOR,YPTUS
wood insert on the Ayoura®FREESTANDINGMODEL
1/16”
1-1
1-2
LEAK TEST
Once the plumbing installation is complete and
BEFORETILEORANYOTHERRELATEDWORKBEGINSlLLTHE
BATHTOTHEOVERmOWANDWAITTHIRTYMINUTES#HECK
ALLPLUMBINGHOOKUPSANDBATHFORLEAKS
BainUltra® is not responsible for any water damage
caused by leaks due to improper installation (see
WARRANTY section).
1. DRILLING
1-1
$RILLAvGUIDEHOLEBEFOREUSINGTHE
hole saw.
1-2
Use a hole saw in good condition to avoid
accidental scratches. The center guide
BITSHOULDEXTENDvCMFORCORRECT
drill positioning.
IMPORTANT
s$ONOTREMOVETHEPROTECTIVEPLASTIClLMPEELCOATONTHEBATHANDPLACEADROPCLOTHINTHE
Thermomasseur® during installation to protect acrylic.
s4OAVOIDDRILLINGINANAIRINTAKEZONEORANELECTRICCOMPONENTALWAYSCHECKUNDERDECK
BEFOREDRILLING
s$RILLOPENINGSSLIGHTLYLARGERTHANACTUALFAUCETSIZE4HISISTOAVOIDANYPOSSIBLECRACKINGOR other damage to the acrylic.
s7HENINSTALLINGFAUCETSDONOTOVERTIGHTENlTTINGSASTHISMAYDAMAGETHEACRYLIC
s4HISTYPEOFDAMAGEISNOTCOVEREDBYTHEWARRANTY
s$RILLATMEDIUMSPEEDANDDONOTAPPLYPRESSURETODRILLLETTHEDRILLDOTHEWORK
s4HETEMPERATUREOFTHEWATERHEATERSHOULDNOTEXCEEDPRESETANDORRECOMMENDEDLEVELSBYTHE
MANUFACTURER4HISMAYCAUSEATHERMALSHOCKTOTHEACRYLICANDWILLNOTBECOVEREDBYTHEWARRANTY
10
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
BAT H ON DE CK - PL U M B I N G I N STA L L ATI ON
PLUMBING INSTALLATION
1. INSTALLATION
1-1
Prepare the site to connect the plumbing
and turbine.
1-2
UILDTHEvXvWOODENSTRUCTURETAKING
"
INTOACCOUNTTHETHICKNESSOFTHECERAMIC
tiles and the plywood as well as the height
OFTHEBATH
NOTE:0LANAIRINTAKEFORTURBINE
1-3
Secure plywood into place with screws
around and above structure.
1-4
#UTINSIDEvOFTHEOUTSIDEDIMENSIONS
OFTHETUB
1-5
Ensure bath is levelled and that it fits properly
in cutout.
NOTE: Protect turbine as you insert bath.
1-6
1-7
1 1/2" [3.8 cm]
Edge of bath
Ceramic, marble,
granit or other
Install desired finishing materials (ceramic
tiles, granit, marble or other) and top
SURFACEANDSIDINGOFTHEDECK
Plywood
3ETBATHBACKINTOPLACEANDconduct
plumbing and turbine connection.
2” x 3”
structure
3EESPECIlCATIONSHEETOFBATHFOREXCEPTIONS
IMPORTANT
s"ATHMUSTBECOMPLETELYSUPPORTEDBYTHEmOORMAKINGSURETHEEDGERESTSENTIRELYONTHESTRUCTURE
s"ATHMUSTBELEVELLED
s"ATHISMOLDEDWITHASLOPETOWARDDRAIN)FBATHISLEVELLEDINRESPECTTOTHEDECKTHEWATERWILL
drain completely.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
11
TH ER MO MASSEUR ®
BATH ON DECK
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
U ND E RMO U NT E D B AT H - P L U MB I NG I NS TA L LATIO N
TH ER MO MASSEUR ®
UNDERMOUNTED BATH
PLUMBING INSTALLATION
1. INSTALLATION
1-1
Prepare the site to connect the plumbing
and turbine.
1-2
Build the (2” x 3”) levelled wooden strucTUREWITHPLYWOODASIN$ETAIL!TAKING
INTOACCOUNTTHETHICKNESSOFTHECERAMIC
tiles and the plywood as well as the height
OFTHEBATH
NOTE:0LANAIRINTAKEFORTURBINE
1-3
Ensure bath is levelled.
NOTE: Protect turbine as you insert bath.
1-4
Conduct plumbing and turbine connection.
1-5
%NCLOSECONTOUROFPODIUMUSINGPLYWOOD
NOTE:0LANAIRINTAKEFORTURBINE
Edge of bath
1" [2.5 cm]
1-6
1-7
Ceramic, marble,
granit or other
Install desired finishing materials (ceramic
tiles, granit, marble or other) and top
SURFACEANDSIDINGOFPODIUM
Plywood
PPLYSEALTOJUNCTIONOFCERAMICTILESWITH
!
ceramic grout and/or silicone.
2” x 3”
structure
Detail A
IMPORTANT
12
s"ATHMUSTBECOMPLETELYSUPPORTEDBYPODIUMMAKINGSURETHEEDGERESTSENTIRELYONTHESTRUCTURE
s"ATHMUSTBELEVELLED
s"ATHISMOLDEDWITHASLOPETOWARDDRAIN)FBATHISLEVELLEDINRESPECTTOTHEDECKTHEWATERWILL
drain completely.
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
T E KURA TM - ARM R ESTS
ARMRESTS
1. INSTALLATION
1-1
1-2
To change the armrests, loosen the
2 armrest screws that are in place
WITHAv!LLENKEY
Place new armrest and secure into place
USINGTHEv!LLENKEY
NOTE
s4HE-Y"ODY2ESTTMACCESSORYKITISCOMPRISEDOFARMRESTSHEADRESTSANDLEGRESTS
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
13
TH ER MO MASSEUR ®
TEKURATM
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
T E K U RA TM - H E A DRE S TS
TEKURATM
HEADRESTS
1. INSTALLATION
1-1
NOTE
14
3ETHEADRESTONUPPERPARTOFBACKREST
s)NSTALLATIONOFTHEHEADRESTISPOSSIBLEONANUNDERMOUNTEDBATHTHATWASINSTALLEDACCORDING
TOINSTRUCTIONSSEEPAGEOFTHISMANUAL
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
T E KURA TM - LE GR EST F OR 6 6 3 6 1 - PER SON M O D E L
LEGREST FOR 6636 1-PERSON MODEL
1. INSTALLATION
1-1
Loosen the 2 legrest suction cups by
approximately 0 to 1 ½ “ (0 to 3.8 cm),
ACCORDINGTODESIREDHEIGHTOFLEGREST
The two suction cups must be at the
same height.
1-2
3ETLEGRESTONBOTTOMOFBATHINORDERFOR
it to rest securely on the specially designed
notches.
1-3
Press down on the uppermost part to
MAKESUCTIONCUPADHERETOSURFACE
0 to 11/2"
[0 to 3.8 cm]
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
15
TH ER MO MASSEUR ®
TEKURATM
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
T E K U RA TM - L E G RE S T S FO R 7242 2-P E RS O N MO DE L
TEKURATM
LEGRESTS FOR 7242 2-PERSON MODEL
1. INSTALLATION
1-1
,OOSENTHESUCTIONCUPSOFEACHLEGREST
by approximately 0 to 1 ½” (0 to 3.8 cm),
ACCORDINGTODESIREDHEIGHTOFLEGRESTS!LL
4 suction cups must be at the same height.
1-2
3ETTHElRSTLEGRESTONBOTTOMOFBATHIN
ORDERFORITTORESTSECURELYONEDGEOFONE
OFTHESEATS
1-3
Press down on the uppermost part to
MAKESUCTIONCUPADHERETOSURFACE
1-4
Set the second legrest opposite the first so
they rest against one another.
1-5
0RESSDOWNONTOPPARTTOMAKESUCTION
CUPSADHERETOSURFACE
0 to 11/2"
[0 to 3.8 cm]
16
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
BALNE O ® , AYO U R A ® & A M M A ® F R EESTA N DI NG - PA R T S A ND T O O L S
TH ER MO MASSEUR ®
BALNEO®, AYOURA®, AMMA® & ORIGAMI FREESTANDING
PARTS AND TOOLS
A. PARTS INCLUDED
A-1
Pipe concealer (Cella model)
A-2
Screws and washers
(Cella and Amma® models)
A-3
Floor anchoring
(Ayoura®, Naos and Sanos)
A-4
Template (Ayoura® and Amma® models)
A-1
A-2
A-3
A-4
x1
x4
x2
x1
B. TOOLS REQUIRED
B-1
24” level
B-2
#AULKINGGUN
B-3
Pencil
B-4
%RASABLEMARKER
B-5
Drill
B-6
3/16” drill bit
B-7
2” hole saw
B-8
7/16” wrench (Cella and Amma® models)
7/8” wrench (Ayoura® model)
B-9
Phillips #2 screwdriver
B-10
Silicone
B-2
B-1
B-3
B-4
B-5
B-6
B-7
B-8
B-10
B-9
IMPORTANT
s"EFORESTARTINGINSTALLATIONENSURETHATPARTSRECEIVEDMATCHYOURORDER&ORALLQUESTIONSCALL
BainUltra® at 1 800 463-2187.
s)NSTRUCTIONSINTHISSECTIONAPPLYTOTHE!YOURA® and Amma®FREESTANDINGMODELS2EFERTO
Thermomasseur®INSTRUCTIONSFORTHEINSTALLATIONOF!YOURA® and Amma® drop-in models.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
17
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
TH ER MO MASSEUR ®
B A L NE O ® , AY O U RA ® & A MMA ® FRE E S TA ND I NG - S I T E P RE PA R ATIO N
BALNEO®, AYOURA®, AMMA® & ORIGAMI FREESTANDING
SITE PREPARATION
If the massage table will be used on the Ayoura®
model, BainUltra® recommends leaving at least
3’ (0.92 m) of free space around the bath to give
the massage therapist enough room to work.
BEDDING
s"EFORElNISHINGYOURBATHROOMmOORCERAMIC
WOODOROTHERENSURETHATTHEmOORISLEVEL.O
SUBSEQUENTADJUSTMENTSMAYBEMADETOTHESE
BATHSEXCEPTFORTHE!MMA® model, where shims
may be installed under the bath.
s4HERMOMASSEURS® are molded with an integrated
SLOPETOWARDSTHEDRAIN)FmOORISLEVELTHEBATH
will drain accordingly.
s4HE!YOURA® model requires a 12’’ x 20’’ (30.5 cm
x 50.8 cm) recess where drain, water and electric
SUPPLIESCONTROLCABLEANDIFNEEDEDREMOTEAIR
SUPPLYHAVEBEENINSTALLED3EEBATHSTEMPLATEFOR
correct positions.
If you cannot install the turbine or provide an air
passage under the floor for the Cella, Naos, or
Sanos models, an optional surface installation kit
is available and must be ordered through your
retailer.
s4HE!MMA® model requires a 12” x 9” (30.5 cm
XCMRECESSFORTHEDRAIN2EFERTOTHEBATH
TEMPLATEFORTHELOCATIONSOFWATERSUPPLYELECTRICAL
connection, and control cable and remote air supply,
IFAPPLICABLE
SERVICE ACCESS AND VENTILATION
For models in the Balneo® series, the turbine is
not installed on the ThermoMasseur®. Determine
a suitable place close to the bath (must be less than
;M=AWAYEITHERUNDERTHEmOORINACLOSET
or any other location that will conceal the power
module and turbine. Chosen location must be easily
ACCESSIBLEFORSERVICINGWHILEALLOWINGSUFlCIENTAIR
CIRCULATIONFORTHETURBINESEETURBINE - REMOTE
MOUNTING section).
The turbine of the Ayoura® and Amma® models is
installed beneath the bath. To allow access to
THETURBINEANDOTHERCOMPONENTSFORESEEAv
XvCMXCMSPACEFACINGTHE!YOURA®
access panel. For the Amma®MODELFORESEEANv
(28 cm) space around the bath in order to be able to
TAKEOUTTHEREMOVABLEBASE2EFERTOTHETEMPLATE
4HETURBINEMAYALSOBEINSTALLEDREMOTELY)FNECESSARY
please contact BainUltra® at 1 800 463-2187FOR
ADDITIONALINFORMATION
18
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
BALNE O ® , AYO U R A ® & A M M A ® F R EESTA N DI NG - S I T E P RE PA RAT I O N
TH ER MO MASSEUR ®
PLUMBING
32"
s5SEmEXIBLEPIPESFOR!YOURA® and Amma® water
connections.
[81.3 cm]
s/NTHE!YOURA®MODELTHEFAUCETMAYBEINSTALLED
on the acrylic or wood lip. On the Amma® model,
THEFAUCETMAYBEINSTALLEDONTHEBATHLEDGE
)NBOTHCASESFOLLOWFAUCETLOCATIONRECOMMENDAtions in drawings.
3 7/8"
[9.8 cm]
NOTE:"EFOREDRILLINGTHEWOODORACRYLICREADTHE
instructions in the THERMOMASSEUR® PLUMBING INSTALLATION section.
s/NTHE!YOURA® model, BainUltra® recommends
INSTALLINGFAUCETSNOHIGHERTHANvCM
This is the height clearance under the massage
TABLEWHENITISINSTALLED)FTHEFAUCETEXCEEDSTHIS height, you will not be able to install the massage
table.
NOTE:4HELENGTHOFPIPE!UNDERTHELIPMUST NOTIMPEDEREINSTALLATIONOFTHEACCESSPANEL
4HISMEASUREVARIESDEPENDINGONFAUCET models and location on the acrylic or wood lip.
Faucet area Amma®
Faucet area Ayoura®
MASSAGE table
4 5/8" (11,7cm)
2" (5,1cm)
(A)
Diagonal view Ayoura®
WARNING
s Balneo®SERIESBATHSCANNOTBEDRILLEDFORFAUCETINSTALLATION&AUCETSMUSTBEFREESTANDINGOR
wall-mounted models.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
19
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
TH ER MO MASSEUR ®
AY O U RA ® F RE E S TA ND I NG - I NS TA L L ATIO N
AYOURA® FREESTANDING
INSTALLATION
1. BATH SITE
1-1
/NCEmOORISPREPAREDANDLEVELAND
recess is cleared around the drain, place
INSTALLATIONTEMPLATEONmOORINTHE
chosen location.
1-2
!LIGNTEMPLATEOVERmOWDRAINhole with
mOORDRAINANDMAKESURERECESSAROUND
drain matches required measurements.
1-3
-ARKANCHORSCREWENTRYpoints on the
mOOR
1-4
Remove template and screw anchors
where specified.
TEMPLATE:
AYOURA
Dimensions: ±1/4" [±6mm]
12"
20"
1-1
1-2
2. INSTALLATION
2-1
Unscrew both screws on access panel
under the lip and gently remove panel.
2-2
#OMPLETEINSTALLATIONOFBATHDRAIN-AKE
sure it is watertight.
2-3
Install bath on anchors.
2-4
Connect drain and water supply and
finish wiring.
2-5
Reinstall access panel.
20
1 800 463.2187
2-3
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
AMMA ® FRE E STA N DI N G - I N STA L L ATI ON
INSTALLATION
1. BATH SITE
1-1
NCEmOORISPREPAREDANDLEVELAND
/
recess is cleared around the drain, place
INSTALLATIONTEMPLATEONmOORINTHECHOSEN
location.
1-2
!
LIGNTHETEMPLATEOVERmOWWITHTHEmOOR
drain and ensure that the recess around
the drain is properly measured.
1-3
1-1
1-2
Use a 3/16” bit to drill anchor screw entry
points.
2. INSTALLATION
2-1
Mount drain on bath. Ensure watertightness.
2-2
Position the bath, aligning anchor holes
with anchor screw entry points.
2-3
Connect bath drain and water supply,
and complete electrical wiring.
2-4
Once the bath is in place and all connections
completed, secure bath in place using
washers and screws supplied.
2-5
Install base.
2-3
2-4
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
21
TH ER MO MASSEUR ®
AMMA® FREESTANDING
O W N E R’S MAN U AL | T H ERMOMASS EUR ®
B A L NE O ® - NA O S & S A NO S - I NS TA L LATIO N
TH ER MO MASSEUR ®
BALNEO® - NAOS & SANOS
INSTALLATION
1. BATH SITE
1-1
/NCETHEmOORHASBEENlNISHEDANDIS
PERFECTLYLEVELPLACE4HERMO-ASSEUR® in
the exact chosen location. Trace the outline
OFTHEBATHWITHANERASABLEMARKER
1-1
1-2
Remove the ThermoMasseur® ANDCAREFULLY
PLACEITUPSIDEDOWNONABLANKETOR
corrugated cardboard (ex. the box in which
it was delivered).
Vertical –
Anchoring
Point
TOP VIEW
1-3
/NTHEmOORDETERMINEBYREFERRINGTO
MEASUREMENTSTAKENUNDERNEATHTHEBATH
THEEXACTLOCATIONOFTHEDRAINTHEAIRPIPE
and the two anchoring points at each end
OFTHEBATH
Vertical –
Air Intake
Pipe
2. INSTALLATION
2-1
)NSTALLTHEDRAINANDOVERmOWSETONTHE
BATHANDTHElRSTSECTIONOFTHEAIRINTAKE
PIPE!"3UNDERTHEmOOR
2-2
!PPLYASILICONEJOINTTOTHEbase rim.
2-3
Put the ThermoMasseur® in place and put
PIPESTHROUGHTHEmOORENSURINGBATHIS
aligned with anchoring points.
2-4
7IPEOFFEXCESSSILICONEimmediately.
Horizontal –
Anchoring
Point
Vertical –
Drain
1- 3
Horizontal – Drain
2-2
2-1
LEAK TEST
/NCEPLUMBINGISFULLYINSTALLEDANDBEFOREBEGINNING
ANYOTHERWORKlLLTHE4HERMO-ASSEUR®TOOVERmOW
ANDWAITMINUTES#HECKALLPLUMBINGHOOKUPS
ANDBATHFORLEAKSBainUltra® is not responsible for
any water damage caused by improper installation
(see Warranty section).
ELECTRICITY
Install turbine and InMix power module connections
according to specifications outlined in the MIAMULTI®
ELECTRICAL INSTALLATION - TURBINE section.
2-3
NOTES
s3INCETHESEMODELSSITDIRECTLYONTHEmOORTHEOVERmOWDRAINPIPEOPENINGISFACTORYDRILLED
s4OINSTALLATIONOFTHE.AOSOR3ANOSONACONCRETESLABWITHNOACCESSBELOWFORAIRENTRYTOTHE
BATHAHOLEOFINCHCMINDIAMETERMUSTBEDRILLEDINTOTHEBATHSKIRTTOALLOWAIR SUPPLYTOTHEBATH)MPORTANT$ONOTDRILLABOVEHEIGHTOFEXISTINGHOLEINTHESKIRTINTENDEDTO
CONNECTDRAINTOOVERmOW
22
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
BALNE O ® - CE L L A - I N STA L L ATI ON
TH ER MO MASSEUR ®
BALNEO® - CELLA
INSTALLATION
1. BATH SITE
1-1
/NCETHEmOORHASBEENlNISHEDANDIS
PERFECTLYLEVELDETERMINETHEEXACTLOCATION
OFTHE4HERMO-ASSEUR®-ARKTHEFOLLOWING
ONTHEmOOR
APOSITIONOFTHEFOURFEET
BHOLESTOBEDRILLEDFORTHEDRAINANDAIR
INTAKEFORTHETURBINE
1-2
$RILLTHEFOURHOLESFORTHEFEETWITHA
DRILLBITANDTHEDRAINANDAIRINTAKE
openings with a 2’’ hole saw.
Cella
5 1/2" [14 cm]
2 3/4"
Cella 6036
2. INSTALLATION
2-1
)NSTALLTHEDRAINANDOVERmOWSETONTHE
BATHANDTHElRSTSECTIONOFTHEAIRINTAKE
PIPE!"3UNDERTHEmOOR#OVER
the ABS pipe with pipe concealer
(included).
2-2
Once the ThermoMasseur® is in place
WITHPIPINGINSTALLEDINTHEmOORSECURE
THEFOURFEETWITHSCREWSANDWASHERS
provided. (A-2)
[7 cm]
Cella
2-1
Cella 6036
2-1
IMPORTANT
s$ONOTREMOVETHEPROTECTIVEPLASTIClLMFROMTHEBATHANDPLACEADROPCLOTHINTHE4HERMOMASSEUR®
during installation to protect the acrylic.
s4HE4HERMOMASSEUR®MUSTBESECUREDTOTHEmOOR
WARNING
s Balneo®SERIESBATHSCANNOTBEDRILLEDFORFAUCETINSTALLATION&AUCETSMUSTBEFREESTANDINGOR
wall-mounted models.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
23
O W N E R’S MAN U AL | T H ERMOMASSEUR ®
TH ER MO MASSEUR ®
OR I GA M I F R EES TA ND I NG D E S I G N S E RI E S - PA R T S A ND T O O L S - S I T E P RE PA RATIO N
ORIGAMI FREESTANDING DESIGN SERIES
PARTS AND TOOLS
A. PARTS INCLUDED
A-1
Anchor points
A-2
Installation template
A-3
&LEXIBLEvPIPEFOROVERmOW
A-4
Access panel
A-5
Access panel hinge
A-1
A-2
A-3
B. TOOLS REQUIRED
B-1
48-inch level
A-4
A-5
B-1
ORIGAMI FREESTANDING DESIGN SERIES
SITE PREPARATION
The Origami Freestanding Design Series requires
a 12” x 10” (30 cm X 25 cm) compartment for the
drain, distance air inlet and, if applicable, space
for control cables and options. Refer to the installation template.
24
1 800 463.2187
ACCESS AND AIR INLET
For this model, the turbine is not installed on the bathtub.
Determine a location near the bathtub at a maximum distance
OFFEETORMETRESUNDERTHEmOORINACABINETORANYOTHER
location to conceal the turbine and optional accessory casings,
IFAPPLICABLE4HELOCATIONCHOSENMUSTALSOBEACCESSIBLEANDALLOW
SUFlCIENTAIRINTAKEFORTHETURBINE
2EFERTOTHETURBINE – DISTANCE INSTALLATION section).
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E R M O MA SSE U R ® | O W N E R ’ S M A N U AL
ORIGAMI FRE ESTA N DI N G DESI GN SER I ES - I N S TA L L AT I O N
INSTALLATION
1. LOCATION
1-1
Once the compartment around the drain is
COMPLETEDINTHEmOORPLACETHEINSTALLATION
template on the ground at the chosen location.
1-2
LIGNTHEPOSITIONOFTHEOVERmOWDRAINWITH
!
THEmOORDRAINANDENSURETHATTHECOMPARTMENTSIZECORRESPONDSTOREQUIREMENTS
1-3
ARKTHELOCATIONOFTHEANCHORPOINTSCREWS
1-4
Remove the installation template and screw
INTHEANCHORPOINTSINTHEMARKEDLOCATIONS
1-1
2. INSTALLATION
2-1
2-2
Assemble the drain on the bathtub. Use
THEmEXIBLEvPIPEPROVIDEDFORTHE
JUNCTIONBETWEENTHEOVERmOWANDTHE
4JOINT%NSUREWATERTIGHTNESS4HIS
operation is much easier to complete
when the bathtub rests on its side. Place a
COVERORPROTECTIVECARDBOARDONTHEmOOR
BEFOREPOSITIONINGTHEBATHTUBONITSSIDE
!PPLYAJOINTOFSILICONEUNDERTHEEDGE
OFTHEBASEOFTHEBATHTUB
2-3
Install the bathtub on the anchor points
FASTENEDTOTHEmOORANDIMMEDIATELYWIPE
away any excess silicone. Connect the drain.
2-4
Install the turbine according to the
instructions in the TURBINE – DISTANCE
).34!,,!4)/.SECTIONOFTHEMANUAL
4HEAIRINLETISLOCATEDTOTHELEFTOFTHE
BATHTUBDRAINANDIFAPPLICABLECONTROL
and option connection cables to the right.
Connect control and option cables
IFAPPLICABLE
2-5
SEALEVELORRULERTODRAWALINEONTHEmOOR
5
between contact points between the access
PANELARCHANDTHEBASEOFTHEBATHTUB
2-6
OSITIONTHEMETALACCESSPANELHINGEOF
0
an inch behind the line drawn in Step 2-5.
2-7
3 CREWTHEHINGEINPLACEONTHEmOOR
USINGTHESLOTSPRJOVIDED)NSTALLPANEL
2-2
2-1
2-3
2-6
3/4
NOTES
s4OINSTALLTHE/RIGAMI&REESTANDING$ESIGN3ERIES
ONACONCRETESLABWITHNOPLACEFORTHEPASSAGE
OFTHEAIRINLETPIPETOTHEBATHTUBDRILLAHOLE
INCHESINDIAMETERINTHESKIRT)-0/24!.4
DRILLTHEHOLEINCHESABOVEmOORLEVELAND
PROTECTTHEBATHTUBWITHAPIECEOFWOODPLACED
behind the location to be drilled.
s)FACONTROLOROPTIONSAREINSTALLEDONTHEBATHTUB
a second pipe may be required through which to
FEEDTHECABLES
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
25
TH ER MO MASSEUR ®
ORIGAMI FREESTANDING DESIGN SERIES
O W N E R’S MAN U AL | T U RBINE
T U RB I NE - T E CH NI CA L S P E CI F I CATIO N S
TURBINE
TECHNICAL SPECIFICATIONS
10 1/8"
[25.7 cm]
MOTOR
9 3/8"
[23.8 cm]
Weight
5,5 lbs
8 1/4"
[21 cm]
TUR BIN E
Motor power
Panasonic 0,8 HP
120 V
600 W
5A
4 3/8"
[11.1 cm]
AIR INTAKE
Air pressure
2,75 psi
AIR OUTLET
Air flow
CFMATMAXIMUMSPEED
29 1/2"
Motor rotation speed
27 000 rpm at maximum speed
[75 cm]
9 7/8"
[25.1 cm]
Noise level
56 to 60 db at maximum speed
Operating cost
(2FOR+7H
7 3/4"
[19,7 cm]
AIR HEATER
6 3/8"
[16.2 cm]
Power
700 W
5.8 A
Operating cost
(2FOR+7H
6 1/2"
[16.5 cm]
NOTES
s4HESPECIlCATIONSSHOWNINDICATETHEOUTEREDGEDIMENSION
s4HEMANUFACTURERACCEPTSAv;CM=VARIANCE4HEREAREVARIATIONSONEACHPRODUCTAND
SPECIlCATIONSARESUBJECTTOCHANGEASWEIMPROVEUPONOURPRODUCTASREQUIRED4HEDIMENSIONS
NEEDEDFORSITEPREPARATIONANDSTRUCTUREBUILDINGWILLDIFFER"AIN5LTRA® assumes no responsibility
FORPREPARATORYWORKDONEPRIORTOTHEPRODUCTBEINGONSITE
WARRANTY
Turbine* | *Some restrictions may apply. (www.bainultra.com/warranty)
26
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T U R B IN E | O W N E R ’ S M A N U A L
T URBINE - E LEC TR I C A L I N STA L L ATI ON
TURBINE
ELECTRICAL INSTALLATION
GROUNDING
MIA®, MIAPLUS®, MIAMULTI®
The turbine is connected to a 120V circuit.
All electrical connections must be carried out by
a certified electrician in accordance with local
electrical requirements and codes. Special attention
must be given to installation of bath’s power circuit,
and more particularly to the following points:
CONNECTIONS
4HE)N-IXMODULE#HROMATHERAPYOFTHEELECTRONICCONTROLAND
THETURBINEMUSTBEEASILYACCESSIBLEATALLTIMES-AKEALLCONNECtions as indicated on diagram below. Ensure that power circuit
is disabled before proceeding with any electrical connections%LECTRICALCABLEFEEDINGBATHMUSTBEATLEAST. !7'
caliber. Turbine must be connected to its own circuit, which,
in turn must be connected directly in breaker panel without
any interrupters or dimmer switches.#ANADAONLYTHEJUNCTIONBOXMUSTBEATTACHEDTOTHEWALLATTHEHEIGHTOFATLEAST
vCMFROMTHEGROUND
#ONNECTIONSFORCONTROLS
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
27
TUR BIN E
The electrical system must be connected to an
independent circuit protected by a 15 AMP Class A
ground fault circuit interrupter (GFCI) that is new
for baths with 1 heated backrest and a 20 amp
(GFCI) for baths with 2 heated backrests of the
Amma® series. This electrical circuit must imperatively
be grounded. CANADA ONLY:FORPERMANENTLY
connected units. A green-colored terminal (or a wire
CONNECTORMARKEDGGRGROUNDORGROUNDINGISPROVIDED
WITHINTHETERMINALCOMPARTMENTNOTAPPLICABLEIFUNIT
SUPPLIEDWITHANELECTRICPLUG4OREDUCETHERISKOF
electrocution, connect this terminal or connector to the
GROUNDINGTERMINALOFYOURELECTRICSERVICEORSUPPLYPANEL
WITHCONDUCTOREQUIVALENTINSIZETOTHECIRCUITCONDUCTORS
supplying the equipment and be 12 AWG or more.
INSTALL THIS UNIT IN ACCORDANCE WITH THE CANADIAN
ELECTRICAL CODE, PART 1.
O W N E R’S MAN U AL | T U RBINE
T U RB I NE - E L E CT RI CA L I NS TA L LATIO N
MIAPLUS®, MIAMULTI®
TUR BIN E
#ONNECTIONSFORDOUBLEHEATEDBACKREST
OFTHE!MMA® series
WARNING
28
s%LECTRICALOUTLETMUSTBEINSTALLEDBYACERTIlEDELECTRICIAN)NSTALLATIONMUSTBECONDUCTEDIN
ACCORDANCEWITHALLLOCALPROVINCIALSTATEANDFEDERALBUILDINGELECTRICALCODESANDREGULATIONS
#ONNECTELECTRICALPOWERSUPPLYONLYAFTERALLLOWVOLTAGEWIRINGISPROPERLYINSTALLEDONTURBINE
)FYOUDIDNOTFOLLOWTHISLASTSTEPSHUTOFFANDTHENRESTARTYOURHOMESCIRCUITBREAKER4URBINE
ANDAIRPIPESHOULDBECLEAROFBUILDINGMATERIALSANDWIRING
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T U R B IN E | O W N E R ’ S M A N U A L
T URBINE - E LEC TR I C A L I N STA L L ATI ON
ELECTRICAL DIAGRAM
%LECTRICALCONNECTIONSFOR#ANADAONLY
TUR BIN E
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
29
O W N E R’S MAN U AL | T U RBINE
T U RB I NE - RE MO T E MO U NT I NG I NS TA L L ATIO N
TURBINE
REMOTE MOUNTING INSTALLATION
TUR BIN E
LOCATION
All bath components are factory-installed. If you
wish to relocate the turbine and InMix module
(Chromatherapy) for practical or accessibility reasons, follow these instructions. Failure to follow
these instructions could result in serious personal
injury or and/or property damage. Failure to follow
these instructions will void the warranty for the
ThermoMasseur® and BainUltra® shall not be responsible
for any damage, loss, cost, expense or liability
relating to failure to follow these instructions.
Choose a location not requiring more than six
elbows (directional changes) and 15 ft. (4.6 m)
of piping to the bath. Choose the shortest possible
distance between bath and turbine to insure the
SYSTEMSPERFORMANCE3UFlCIENTSPACEANDVENTILATIONISNECESSARYFORPROPERAIRCIRCULATION!MBIENT
air temperature should be between 72°F (20°C) and
86°F (30°C). Easy access to system must remain
POSSIBLEATALLTIMESFORSERVICING
TURBINE INSTALLATION
Turbine may be relocated in either a vertical or a
HORIZONTALPOSITIONUse only 1 1/2” (3.8 cm) ABS
or PVC non-flexible pipes and adaptors to extend
air line; the use of flexible pipes is not
recommended (except when factory-installed).
Whenever possible, use two 45° elbows to change
THEDIRECTIONOFYOURPIPING!LLAIRLINEPIPECONNECTIONS
should be glued together except for connections
to the turbine, air-heater of the double heated
backrest of the Amma® serie and air entry on the
bath which are secured in place with screws.
The turbine must be mounted at least 4” (10 cm)
from the floor. To reduce heat loss, use insulating
material along the entire air line. Bath is delivered
WITHAFTMCORDTOCONNECTTHEELECTRONIC
CONTROLTOTHETURBINE)FNECESSARYEXTENSIONSARE
AVAILABLETHROUGHARETAILER4ORELOCATETURBINEREFER
TODIRECTIONSANDILLUSTRATIONSONFOLLOWINGPAGES
IMPORTANT
s)FTHE4HERMO-ASSEUR® comes with LED Chromatherapy system, InMix module must always be
moved with the turbine.
s"AIN5LTRA® Thermomasseurs® AREAIRJETBATHSONLY#ONSEQUENTLYNOWATERSUPPLYWHATSOEVER
SHOULDBECONNECTEDTOTHETURBINESINTAKE
WARNING
30
s!WAITINGPERIODOFHOURSISNECESSARYBEFOREUSINGTURBINEIFPIPESHAVEBEENGLUEDTOGETHER
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T U R B IN E | O W N E R ’ S M A N U A L
T URBINE - RE MOTE M OU N TI N G I N STA L L ATI O N
A. TO REMOVE TURBINE FROM ITS
PRESENT SUPPORTS
ORTHEDOUBLEHEATEDBACKRESTOFTHE
&
Amma® series, see pages 28 and 29.
A-1
Disconnect wires going to turbine.
A-2
5SINGAmATHEADSCREWDRIVERLOOSEN
fitting.
Fitting
A-3
For Ayoura® freestanding only:
Disconnect turbine at fitting by loosening
LOWERANDUPPERlTTINGWITHmATHEAD
screwdriver.
A-2
Wires
A-1
B. TO REINSTALL TURBINE
B-1
Mount turbine to wall or wall structure
by inserting 1” (2.5 cm) screws in
mounting holes.
B-2
Use as many 1 1/2” (4 cm) ABS or PVC
pipes as necessary to connect turbine to
bath. Follow all relocation instructions
provided in installation manual. To reduce
vibrations, avoid having air line pipes
touch home structure.
B-3
Fitting
3ECUREPIPEATAIROUTPUTOFTURBINEBY
drilling a 1/8” (0.3 cm) hole and by using
1/2” (1.3 cm) screw. (Do not glue).
B-4
Reconnect wires going to turbine.
B-5
Connect turbine’s power supply.
B-2
Air output B-3
B-4
B-1
B-5
Power cable
A-3
2x
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
31
TUR
TUR
BIN
BIN
E E
NOTE
O W N E R’S MAN U AL | T U RBINE
A M M A ® SER I ES W I T H 2 H E AT E D B A CK RE S T S - RE MO T E MO U NT I NG I NS TA L LATIO N
AMMA® SERIES WITH 2 HEATED BACKRESTS
TUR BIN E
REMOTE MOUNTING INSTALLATION
TUR BIN E
TUR BIN E
A. TO
RETIRER
REMOVE
LA TURBINE
TURBINEDE
FROM
SES ITS
PRESENT
SUPPORTSSUPPORTS
ACTUELS
A-1
Disconnect wires going to turbine.
A-2
5SINGAmATHEADSCREWDRIVERLOOSENTHE
upper fitting on side « A » and the right
lTTINGOFTHEJOINTUNDERTHETURBINE
A-3
5
SINGAmATHEADSCREWDRIVERDISCONNECT
the turbine by loosening the lower fitting
on side « B ».
A-4
Using a squarehead screwdriver, remove
pipes on side « A » by unscrewing the
screw securing pipes to turbine.
A-5
Unscrew the screws securing the air-heater
in place under the turbine. Unscrew the
screw on the elbow on side « B » and
FOLLOWINSTRUCTIONSIN3ECTION"TOREINSTALL
turbine.
A-2
Upper fitting
A-3
Lower fitting
A-1
For double
heated
backrest
A-4
A-5
A-5
Side «B»
Side «A»
A-2
32
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T U R B IN E | O W N E R ’ S M A N U A L
AMMA ® SE RIE S W I TH 2 H EATED B A C K R ESTS - RE MO T E MO U NT I NG I NS TA L L AT I O N
B. TO REINSTALL TURBINE
B-1
Mount the turbine to the wall or wall
structure by inserting 1” (2.5 cm) screws
into mounting holes. Mounting must
FOLLOWTHEDIRECTIONINDICATEDONTHE
air-heater to ensure proper operation.
Moreover, there must be at least 1 1/2”
(4 cm) clearance between the air-heater
ANDTHEmOORONCEMOUNTINGISCOMPLETED
B-3
Use as many 1 1/2” (4 cm) ABS or PVC
pipes as necessary to connect the two air
INTAKESTOEACHBACKREST&OLLOWALL
relocation instructions provided in the
installation manual. To reduce vibrations,
avoid having air pipes touch home structure.
B-4
Connect wires going to turbine.
B-5
Connect power to turbine and InMix module.
IMPORTANT
For double
heated backrest
B-4
B-3
B-5
B-2
B-1
Connection
s%NSURETHATBOTHAIRHEATERSARECONNECTEDTOTHETURBINEINTHEDIRECTIONINDICATEDONEACH
air-heater.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
33
TUR BIN E
B-2
Insert the lower air-heater into the end
OFTHE4SHAPEDPIPE-OUNTPROPERLYTO
ensure air circulation as indicated on the
air-heater. Pre-drill a 1/8” (0.3 cm) hole.
Insert and tighten screw. Do not use glue.
)FNECESSARYUNSCREWTHEAIROUTPUTSCREW
on the turbine to position pipe at desired
angle. Pre-drill a 1/8” (0.3 cm) hole and
insert screw. Do not use glue.
B-3
O W N E R’S MAN U AL | T U RBINE
A M M A ® SER I ES W I T H 2 H E AT E D B A CK RE S T S - RE MO T E MO U NT I NG I NS TA L LATIO N
TUR BIN E
EXAMPLE OF INSTALLATION IN AN
ADJACENT SPACE
1
Turbine must be at least 1 1/2” (3.8 cm)
FROMTHEmOOR
2
$OOROFCLOSETWHERETURBINEISMOUNTED
must provide a minimum 1” (2.5 cm)
GAPBETWEENmOORANDDOORFORSUFlCIENT
VENTILATION#HOSENSPACEFORTURBINE
MUSTBEATLEASTFT3 (1.41m3) or
COMMUNICATEWITHASPACEOFATLEASTSUCH
volume.
%XXvXFT3
MXMXMM3)
TUR BIN E
1.5" [3.8 cm]
1
WARNING
Minimum height
of support
1" [2.5 cm]
2
Space under door
s"EFORESTARTINGTURBINEVERIFYTHATITISINSTALLEDINTHECORRECTPOSITION
s4HEThermomasseur® must be connected only to a supply circuit that is protected by a 15 amp
CLASSAGROUNDFAULTCIRCUITINTERRUPTER(GFCI)FORBATHSWITHHEATEDBACKRESTANDA
20 amp GFCIFORBATHSWITHHEATEDBACKRESTSOFTHE!MMA® and TMU series.
s&ORDOUBLEHEATEDBACKRESTOFTHE!MMA® and TMU series, ensure that both air-heaters are
mounted so that air circulates in the direction indicated on the air-heaters. The air-heater power
module must be mounted in the direction indicated by “up” on the casing.
s/NCEINSTALLATIONISCOMPLETEALWAYSSTARTMOTORWITHOUTWATERINBATHTOCHECKIFAIREXITS
FULLYTHROUGHBATHSAIRJETS
s&AILURETOFOLLOWTHESEINSTRUCTIONSCOULDRESULTINSERIOUSPERSONALINJURYORANDORPROPERTY
DAMAGE&AILURETOFOLLOWTHESEINSTRUCTIONSWILLVOIDTHEWARRANTYFORTHE4HERMOMASSEUR® and
BainUltra®SHALLNOTBERESPONSIBLEFORANYDAMAGELOSSCOSTEXPENSEORLIABILITYRELATINGTO
FAILURETOFOLLOWTHESEINSTRUCTIONS
34
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
SKIR T S - GE NER A L I N STR U C TI ON S
SKIRTS
GENERAL INSTRUCTIONS
SIZING ACRYLIC PARTS
$EPENDINGONWALLlNISHYOUMAYNEEDTOSIZETHE
PANELSANDTOEKICKS7HENINSTALLATIONINSTRUCTIONSOF
SPECIlCSKIRTMODELMENTIONSIZINGOFACRYLICPARTSIF
SUCHSIZINGISNECESSARYFOLLOWTHESESTEPS
PEEL COAT
A plastic film (“peel coat”) protects the acrylic parts.
)TISBESTTOLEAVETHISlLMINPLACEWHILEWORKING
/NLYREMOVEITJUSTBEFOREINSTALLINGTHEPARTS)FYOU
REMOVETHEPEELCOATWHENWORKSTARTSYOURISK
SCRATCHINGTHEPARTSDURINGINSTALLATION)FYOUREMOVE
THEPEELCOATONLYAFTERALLPARTSAREINSTALLEDSOME
plastic may stay trapped in certain areas.
Instructions specific to each skirt model are
presented on the following pages. These general
instructions apply to all models.
Before starting, make sure all parts match your
order. Contact BainUltra® at 1-800-463-2187
if you have any questions.
Ensure that the ThermoMasseur® has been
installed in accordance with BainUltra® installation
instructions and the bath bottom is flush with
the floor.
1-1
1. SIZING ACRYLIC
Protect the acrylic with tape.
1-2
Trace the cutting line.
1-3
#UTUSINGAJIGSAWWITHAMELAMINEBLADE
or a metal blade (minimum 14 teeth/inch).
SKIRTS
1-1
1-2
1-3
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
35
O W N E R’S MAN U AL | SK IRTS
S K I R T S - PA R T S A ND TO O LS
SKIRTS
PARTS AND TOOLS
A.NECESSARY
AND
RETIRER LA TOOLS
TURBINE
DE SES
PARTS
REQUIRED
(NOT INCLUDED)
SUPPORTS
ACTUELS
FOR ALL MODELS
A-1
Measuring tape
A-2
Screwdriver
s3ILICONE
You will require the pencil and level used for the
installation of the ThermoMasseur® as well as
the following items depending on the skirt you
are installing.
FOR TRIMMING (IF NEEDED)
A-3
Adhesive tape
A-4
Jigsaw and finishing blade
SKIRTS
SKIRTS
AMMA CR 6060 AND LITTORA®
A-5
Drill (depending on the installation)
A-6
Eight #8 screws
A-7
vMONKEYWRENCH
A-8
7/16”ratchet
A-1
A-2
A-4
A-3
SJ-1 MODEL
A-5
Drill (depending on the installation)
s4WOWOODENBLOCKSXX
S-J 3 CN2K/CR2K MODELS
A-6
Eight screws
A-7
vMONKEYWRENCH
A-8
7/16”ratchet
A-9
v!LLENKEY
A-5
A-6
SJ-3 TM/SE MODELS
A-6
Eight screws
A-7
vMONKEYWRENCH
SJ-3 TMU 5454/6060 MODELS
A-6
Ten #8 screws
s#ISSORS
A-7
A-8
A-9
A-10
ELEGANCE
A-10
36
Long-nosed pliers
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
AMMA CR 6060 - I N STA L L ATI ON
AMMA CR 6060
INSTALLATION
1. PARTS INCLUDED
1-3
1-2
1-1
3KIRT
1-2
,EFTWALLlNISHINGSTRIP
1-3
Right wall finishing strip
1-4
4OEKICK
1-5
Retainer clips
1-6
vCMWOODENBLOCKS
1-7
,OWERANCHORAGEFOR,ITTORA SKIRT
1-8
1/4-20 x 1” hex head bolts
1-9
1/4-20 x 1-3/4” hex head bolts
1-10
#8 x1/2” screws
1-1
1-4
4X
2X
1-5
1-6
®
4X
4X
4X
1-7
1-8
1-9
1-10
2. INSTALATION
NOTE
)FWOODENBLOCKSAREALREADYINSTALLEDON
bath, see step 2-3.
2-1
Using builder’s glue or epoxy, glue the
TWOWOODENBLOCKSATvCM
FROMTHELEDGEOFTHEBATHANDATv
CMFROMEACHSIDEOFTHECENTER
NOTE
4HEBLOCKSATBOTHENDSAREFACTORYINSTALLED
2-2
Install the retainer clips (1-5) on the
WOODENBLOCKSUSINGTHEXvSCREWS
4HECENTEROFTHECLIPMUSTBEAT
vCMFROMTHEEXTERIORLEDGEOFTHE
bath.
2-1
12"
12"
[30.5 cm]
[30.5 cm]
1/4"
[0.6 cm]
1-6
1-5
1"
1-10
[2.5 cm]
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
2-2
37
SKIRTS
4X
O W N E R’S MAN U AL | SK IRTS
A MMA CR 6060 - I NS TA L L ATIO N
SKIRTS
SKIRTS
2. INSTALLATION (NEXT)
2-3
2
ESTINGTHELEVELONTHEOUTERLEDGEOFTHE
BATHTRACEAGUIDELINEONTHELEFTWALL
2EPEATSTEPFOROTHERSIDE
2-4
TvCMFROMTHELINETRACEDIN
!
the preceding step (see figure 2-3), trace
APARALLELLINEUNDERTHEBATHANDMARK
AHORIZONTALLINEvCMFROMTHE
UPPERLEDGEOFTHEBATH2EPEATSTEPFOR
other side.
2-3
1 3/16"
[3 cm]
17"
[43.2 cm]
2-4
2-5
0OSITIONTOEKICKBEHINDTHEPARALLEL
traced lines and secure into place using
FOURSCREWS
NOTE:4RIMTOEKICKASNEEDED
2-6
2
ESTTHEBASEOFTHELEFTWALLfinishing
STRIPINFRONTOFTHETOEKICKANDALIGN
to be parallel with the previously traced
LINEANDHORIZONTALLYWITHTHELINE
traced at 17” (43.2 cm).
NOTE:!HORIZONTALSPACEOFAPPROXIMATELY
5/16” (0.8 cm) should remain
BETWEENTHELEDGEOFTHEBATH
ANDTHEFRONTPARTOFTHEWALL
finishing strip.
2-7
2-5
A-6
1-4
Secure into place in the two predrilled
HOLESUSINGTWOSCREWS2EPEATSTEPFOR
other side.
2-7
1-2
5/16"
[0.8 cm]
2-6
38
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
AMMA CR 6060 - I N STA L L ATI ON
2. INSTALLATION (NEXT)
0
OSITIONSKIRTONmOORTORESTAGAINST
THETOEKICKANDUSINGSHIMSLIFTSKIRTUNTIL
ITSUPPERLIPISINSERTEDATTHECENTEROFTHE
retainer clips.
#
ENTERSKIRTANDWITHAPENCILMARKTHE
LOCATIONOFTHECENTEROFTHEFACTORYDRILLED
HOLESONTHETOEKICK
2EMOVESKIRTANDPOSITIONLOWERANCHORAGE
ONTHETOEKICKATTHECENTEROFTHE
MARKSMADEINPREVIOUSSTEPANDSECURE
into place by tightening the hex head bolts
(1-8). (Do not over tighten).
2EPOSITIONSKIRTBYREUSINGTHESHIMSAND
secure into place by using the hex head
bolts (1-9).
4IGHTENBOLTSUNTILTHEBOTTOMOFTHESKIRT
FORMSASTRAIGHTLINEWITHTHEBOTTOMOF
the side panels.
NOTE:!SILICONESEALATBASEOFTOEKICKIS
recommended to ensure complete
watertightness.
1-1
2-12
SKIRTS
2-8
2-9
1-8
1-7
2-10
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
1-9
39
2-11
O W N E R’S MAN U AL | SK IRTS
E L E G A NCE & L I T T O RA ® I NS TA L LATIO N
ELEGANCE & LITTORA®
INSTALLATION
SKIRTS
1. PARTS INCLUDED
1-2
1-1
3KIRT
1-2
,EFTWALLlNISHINGSTRIP
1-3
Right wall finishing strip
1-4
4OEKICK
1-5
Retainer clips (A or B)
1-6
vCMWOODENBLOCKS
;vCMLEDGEOFBATH=
1-7
vCMWOODENBLOCKS
;vCMLEDGEOFBATH=
1-8
Littora®SKIRTLOWERANCHORAGE
1-9
1/4-20 x 1” hex head bolts
1-10
1/4-20 x 4” hex head bolts
1-11
#8 x 1/2” screws
1-12
#8 x 5/16” screws
1-1
1-3
2X
CLIP A
1-4
2. INSTALLATION
1-5
2X
2X
1-6
1-7
2X
2X
2X
2X
2X
1-8
1-9
1-10
1-11
1-12
2 1/2"
[6.3 cm]
NOTE
)FWOODENBLOCKSAREALREADYINSTALLEDON
the bath, see step 2-3.
2-1
Using builder’s glue or epoxy, glue the two
WOODENBLOCKSORATvCM
FROMTHELEDGEOFTHEBATHANDATv
CMFROMEACHSIDEOFTHECENTER
2-2
Install the retainer clips (1-5) on the 1/2”
CMTHICKWOODENBLOCKSUSINGTHE
#8 x 1/2” screws (1-11) and on the 1/4”
CMTHICKWOODENBLOCKUSINGTHE
XvSCREWS4HECENTEROF
THECLIPMUSTBEATvCMFROMTHE
EXTERIORLEDGEOFTHEBATH
NOTE: Wall finishing
strip must be
INSTALLEDBEFORE
THESKIRT
15 1/8"
15 1/8"
[38.4 cm]
[38.4 cm]
2-1
1/4"
[0.6 cm]
2-2
1-5
1"
[2.5 cm]
1-11 OR 1-12
CLIP A
40
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
E LE GANCE & L I TTOR A ® I N STA L L ATI ON
2. INSTALLATION (NEXT)
2-3
2-3
ESTINGTHELEVELONTHEOUTERLEDGEOFTHE
2
bath, trace a guide line on both walls.
2-4
RACEPARALLELLINES vCMFORa Littora®
4
SKIRTANDvCMFORAN%LEGANCE
SKIRTFROMTHElRSTLINESANDCONNECTTHEM
BYALINEONTHEmOOR
15"
[38.1 cm]
2-4
or
14 5/8"
[37.1 cm]
&
ROMTHETOPOFTHE LEDGEOFTHEBATH
MEASUREvCMFORA,ITTORA®SKIRT
ANDvCMFORAN%LEGANCE
SKIRTTOWARDSTHEmOORANDTRACEA
HORIZONTALLINE
2-5
2"
2-5
0OSITIONTOEKICKBEHINDTHELINEON
THEmOOR$RILLANDSECUREINTOPLACEUSING
FOURSCREWS
NOTE:4RIMTOEKICKASNEEDED4HE
MARKINGSUNDERTOEKICKINDICATE
WHICHSIDETOCUTINORDERFORDRAIN
slot to remain centered.
2-6
1 5/8"
[5 cm]
2-5 [4.1 cm]
LITTORA® SKIRT
ELEGANCE SKIRT
SKIRTS
2-6
1-4
1 3/8”
LITTORA® SKIRT
ELEGANCE SKIRT
(3.5 cm)
2 1/4”
(5.7 cm)
7 1/2”
(19.1 cm)
15 3/4”
(40 cm)
12 1/4”
6”
(31 cm)
(15.2 cm)
8”
1 1/4”
(20.2 cm)
(3.2 cm)
1 1/2”
(3.9 cm)
from 60” to 72”
(from 152.4 cm to 182.9 cm)
57 1/2”
(146 cm)
14 1/2”
(36.8 cm)
17
from 18” to 20 1/8”
1/4”
from 17 1/4” to 20 1/2”
(from 43.8 cm to 52.1 cm)
(43.8 cm)
(from 45.7 cm to 51.1 cm)
54 1/2”
(138.5 cm)
from 59 3/4” to 72 1/4”
(from 151.8 cm to 183.8 cm)
from 59 3/4” to 72 1/4”
(from 151.8 cm to 183.5 cm)
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
41
O W N E R’S MAN U AL | SK IRTS
E L E G A NCE & L I T T O RA ® I NS TA L LATIO N
2-7
3 ETLEFTPANELUNDERTHELEDGEOFTHE
bath and vertically align its inner edge with
the previous line traced vertically under
BATHANDHORIZONTALLYWITHHORIZONTALLINE
NOTE:!HORIZONTALSPACEOFAPPROXIMATELY
5/16” (0.8 cm) or 7/6” (1.1 cm)
SHOULDREMAINBETWEENLEDGEOF
THEBATHANDFRONTPARTOFTHEPANEL
ELEGANCE SKIRT
5/16"
7/16"
[0.8 cm]
[1.1 cm]
1-2
1-9
2-8
2-8
Secure panel into place in the two or three
predrilled holes using two screws. Repeat
STEPFOROTHERPANEL
2-9
Mount lower anchorage (1-8) on center
panel (1-1) as shown. Partially tighten hex
head bolts (1-9 and 1-10).
2-10
Using lower anchorage, secure center
PANELTOTOEKICK
2-11
Center panel and tighten hex head bolts
(1-9) so that anchorage into completely
secured into place (Do not over tighten).
2-12
Slide panel into place under the ledge
OFTHEBATHANDLIFTSOTHATITSUPPERLIPIS
inserted on the retainer clips.
1-8
1-10
SKIRTS
2-7
SKIRTS
2-9
1-1
2-10
2-11
2-12
42
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
J UPES
LITTORA® SKIRT
2. INSTALLATION (NEXT)
S KIR T S | O W N E R ’ S M A N U A L
E LE GANCE & L I TTOR A ® I N STA L L ATI ON
2. INSTALLATION (NEXT)
2-13
IGHTENHEXHEADBOLTSUNTILTOPOF
4
THECENTERPANELFORMSASTRAIGHTLINEWITH
TOPOFSIDEPANELS
NOTE:!SILICONESEALATBASEOFTOEKICKIS
recommended to ensure complete
watertightness.
1-10
2-13
SKIRTS
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
43
O W N E R’S MAN U AL | SK IRTS
S J -1 - I NS TA L L ATIO N
SJ-1
INSTALLATION
1. PARTS INCLUDED
1-1
Center panel
1-2
Retainer clips
1-3
#8 x 1/2“ screws
1-4
7
OODBLOCKSIFNECESSARY
NOTE: Parts may vary depending on
bath model.
1-1
2. INSTALLATION
NOTE
SKIRTS
2-1
)FWOODBLOCKSAREALREADYINSTALLEDONTHE
bath, go to step 2-2.
2X
2X
2X
1-2
1-3
1-4
A
B
60” (152.4 cm)
16” (40.6 cm)
66” (167.6 cm)
16” (40.6 cm)
72” (182.9 cm)
20” (50.8 cm)
LUEWOODBLOCKSvCMFROM
'
bath rim with epoxy or construction glue.
0OSITIONBLOCKSACCORDINGTOBATHMODEL
B
B
A
2-1
1/4"
[0,6 cm]
44
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
SJ-1 - INSTALL ATI ON
2. INSTALLATION (NEXT)
2-2
2-3
(OLDINGALEVELAGAINSTTHESIDEOFTHE
BATHMARKAGUIDELINEONBOTHWALLS
2-2
4RACEALINEONTHEmOORTOconnect
both lines.
2-3
2-4
)NSTALLTHERETAINERCLIPSONTHEWOODBLOCKS
and secure in place with #8 x 1/2” screws.
2-5
&ASTENTWOWOODBLOCKSTOTHEmOOR
vCMFROMTHECENTEROFTHEBATH
3PACETHEMvCMFROMTHEmOOR
guideline.
)NSERTTOPOFPANELBETWEENTHEBATHRIM
and retainer clips under the bath ledge.
2-7
&ASTENSKIRTTOBLOCKSWITHscrews.
NOTE: It is recommended that
YOUAPPLYASILICONEJOINTTOTHE
bath base to ensure a tight seal.
2-5
SJ-1 : 2 1/2" (6,4 cm)
SJ-2 : 2 1/4"(5,7 cm)
2-4
3/4" [1,9 cm]
SKIRTS
2-6
14"
(35,6 cm)
2-6
2-7
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
45
O W N E R’S MAN U AL | SK IRTS
S J -3 CN2K & CR2K - I NS TA L L ATIO N
SJ-3 CN2K & CR2K
INSTALLATION
1. PARTS INCLUDED
1-1
1-1 3KIRT
1-2
4OEKICK
1-3
,EFTWALLlNISHINGSTRIP
1-4
Right wall finishing strip
1-5 3KIRTBRACKETS
1-6
1/4”–20 x 1” bolts
1-7
1/4”–20 nuts
1-8
Allen screws
1-9
Retainer clips
1-10
#8 x 1/2” screws
1-4
1-3
SKIRTS
1-2
4X
4X
1-5
1-6
4X
4X
4X
4X
4X
1-7
1-8
1-9
1-10
1-11
THERMAL CR2K
1-11 7
OODBLOCKSIFNECESSARY
8"
8"
[20,3 cm]
[20,3 cm]
32"
32"
[81,3 cm]
[81,3 cm]
2. INSTALLATION
NOTE
)FWOODBLOCKSAREALREADYINSTALLEDONTHE
bath, go to step 2-2.
2-1
LUEWOODBLOCKSvCMFROMBATH
'
rim with epoxy or construction glue.
0OSITIONBLOCKSACCORDINGTOBATHMODEL
2-1
1/4"
2-2
[0,6 cm]
THERMAL CN2K
&OLLOWSTEPINTHE3*nSKIRTSECTION
8"
8"
[20,3 cm]
[20,3 cm]
2-3
Place finishing strip under the bath rim
and align it with the level line on the wall.
,EAVEAROUNDvCMOFSPACE
BETWEENTHEBATHANDTHECURVEDENDOF
the strip.
3"
3"
[7,6 cm]
[7,6 cm]
2-3
2-4
Fasten strip with two screws in the holes
PROVIDED2EPEATFORTHEOTHERSIDE
2x
3/16"
2-4
46
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
SJ-3 CN2K & C R 2 K - I N STA L L ATI ON
2. INSTALLATION (NEXT)
2-5
)NSTALLTOEKICKBYLEANINGITagainst
THEINNEREDGEOFTHElNISHINGSTRIPSON
each side.
2-6
&ASTENTOEKICKTOmOORWITHFOURSCREWS
in the holes provided.
2-7
)NSTALLTHEFOURRETAINERCLIPSONTHEWOOD
BLOCKSANDSECUREINPLACEWITHXv
screws.
2-5
2-6
)NSERTTOPOFPANELBETWEENTHEBATHRIM
ANDRETAINERCLIPS0OSITIONBASEOFPANEL
AGAINSTTOEKICK
2-9
2AISEPANELANDADJUSTHEIGHTusing wood
BLOCKS4RACEALINEONTHETOEKICKATTHE
FOURSCREWHOLESTOINDICATEPANELHEIGHT
Remove panel.
2-10
0OSITIONSKIRTBRACKETSASHORIZONTALLYAS
POSSIBLEONTOEKICKALIGNINGTHEBOTTOM
OFTHEBRACKETWITHTHELINETRACEDINSTEP
&ASTENBRACKETSWITHABOLTANDNUT
2-11
Position panel by supporting it on the
SAMEPIECESOFWOODUSEDINSTEP
&ASTENPANELTOTOEKICKWITHTHEFOUR
Allen screws.
NOTE: Be sure there is a 1/8” (0.3 cm)
SPACEBETWEENTHESKIRTBASEAND
TOEKICKTOALLOWFORTURBINEAIR
INTAKE
3/4" [1,9 cm]
SKIRTS
2-8
2-7
2-8
2-9
2-10
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
2-11
47
O W N E R’S MAN U AL | SK IRTS
S J -3 S E - I NS TA L LATIO N
SJ-3 SE
INSTALLATION
1-1
1-1
,EFTPANEL
1-2
Center panel
1-3
Right panel
1-4
,EFTTOEKICK
1-5
#ENTERTOEKICK
1-6
2IGHTTOEKICK
1-7
Retainer clips
1-8
#8 x 1/2” screws
1-9
7OODBLOCKSIFNECESSARY
1-2
1-4
J UPES
1. PARTS INCLUDED
1-3
1-6
1-5
4X
4X
1-7
1-8
4X
1-9
SKIRTS
SKIRTS
SENSATION
9"
9"
[22,8 cm]
[22,8 cm]
27"
27"
[68,6 cm]
[68,6 cm]
2. INSTALLATION
NOTE
)FWOODBLOCKSAREALREADYINSTALLEDONTHE
bath, go to step 2-2.
2-1
LUEWOODBLOCKSvCMFROM
'
bath rim with epoxy or construction glue.
0OSITIONBLOCKSACCORDINGTOBATHMODEL
1/4"
[0,6 cm]
2-1
48
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
SJ-3 SE - INSTA L L ATI ON
2. INSTALLATION (NEXT)
2-2
(OLDLEVELAGAINSTBATHRIMANDMARK
dashes around the bath every 6’’ (15.2 cm).
2-3
-ARKASECONDSETOFDASHEScloser to
THEBATH4HISISWHERETHETOEKICKWILLBE
2-4
*OINTHESECONDSETOFDASHEStogether.
This will reproduce the bath’s curve.
2-2
6"
[15,2 cm]
2"
[5 cm]
2-5
-ARKTHECENTEROFTHISCURVE
2-6
0OSITIONCENTERTOEKICKJUSTbehind the
curved line and center it by aligning the
notch under it with the guideline on
THEmOOR
2-5
3CREWCENTERTOEKICKTOmOORstarting
with the two screws in the middle.
NOTE
9OUMAYHAVETOBENDTHETOEKICKSLIGHTLY
TOMATCHTHECURVEDRAWNONTHEmOOR
2-8
0LACELEFTANDRIGHTTOEKICKSONeither side
ASSHOWNANDSCREWTOmOOR
NOTE:#UTLEFTANDRIGHTTOE
KICKSASNEEDED
2-9
)NSTALLTHEFOURRETAINERCLIPSONTHEWOOD
BLOCKSANDSECUREINPLACEWITHXv
screws.
2"
[5 cm]
2-3
SKIRTS
2-7
2-4
2-6
2-8
2-9
3/4" [1,9 cm]
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
49
O W N E R’S MAN U AL | SK IRTS
S J -3 S E - I NS TA L LATIO N
J UPES
2. INSTALLATION (NEXT)
2-10
)NSERTTOPOFPANELBETWEENTHEBATHRIM
ANDRETAINERCLIPS0OSITIONBASEOFPANEL
AGAINSTTOEKICK
2-11
3 EATBRACKETSONTOEKICKANDADJUST
SCREWSSOTHATBRACKETSAREVERTICAL
2-12
!DJUSTPANELHEIGHTLEAVINGv(0.6 cm)
BETWEENTHEEDGEOFTHEBATHANDTHE
curved panel top.
2-13
%NSUREBRACKETSAREWELLSEATEDONTOEKICK
and tighten wing nut as much as possible.
2-14
2EMOVEPANELANDFOLLOWSTEPS2-10 to
FORTHELEFTPANEL
2-15
EMOVELEFTPANELANDREPEATsteps 2-10
2
to 2-13 with the center panel.
2-16
Leave center panel in place and reinstall
THELEFTANDRIGHTPANELSINSERTINGTOPOF
panel first.
NOTE:#UTLEFTANDRIGHTTOE
KICKSANDPANELSASNEEDED
2-10
SKIRTS
2-11
2-12
50
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
SJ-3 TMU 5454 /6 0 6 0 - I N STA L L ATI ON
SJ-3 TMU 5454 / 6060
INSTALLATION
1. PARTS INCLUDED
1-1
,EFTPANEL
1-2
Center panel
1-3
Right panel
1-4
,EFTTOEKICK
1-1
1-3
1-2
1-5
1-4
1-6
1-8
1-5
#ENTERTOEKICK
1-6
2IGHTTOEKICK
1-7
!CRYLICFOOTING
1-8
Wood insert*
1-9
5PPERBRACKET
6X
6X
1-10 ,OWERBRACKET
1-9
1-10
1-7
1-12
1-11
1-13
12X
2X
1-14
1-15
1-11 v!LLENKEY
1-12
Cutting template
1-13
Round head Allen screw
1-14
No. 8 x 1/2” screws
1-15
No. 8 x 2 1/2” screws and washers*
2-1
0ARTSANDAREONLYINCLUDEDFOR
SKIRTSORDEREDWITHTHESTEP
2. INSTALLATION
2-1
3CREWUPPERBRACKETSINTOFACTORYINSTALLED
WOODBLOCKS"RACKETSMUSTBEmUSHWITH
the bath edge.
2-2
Follow step 2-1 in the SJ-1 SKIRTSECTION
2-3
Cut out cutting template and place it on
mOORALIGNINGTHEARROWMARKEDhLEVELv
with the line traced on the wall.
2-3
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
51
SKIRTS
6X
O W N E R’S MAN U AL | SK IRTS
S J -3 T MU 5454/ 6060 - I NS TA L LATIO N
J UPES
2. INSTALLATION (NEXT)
2-4
SKIRTS
SKIRTS
!LIGNTHECENTERLEFTANDRIGHTTOEKICKS
with the cutting template. Ensure center
TOEKICKISEXACTLYCENTERED
2-5
3CREWTOEKICKSTOmOORANDremove
template.
2-6
3CREWLOWERBRACKETSINTOTHEpredrilled
holes on the center panel using Allen
screws.
NOTE: Do not tighten. Final tightening is
done in the next step.
2-4
2-5
3/16’’
[0,5 cm]
2-7
(OOKTHECENTERPANELLOWERBRACKETON
THECENTERTOEKICK0USHPANELAGAINSTTHE
UPPERBRACKETANDSLIDEUNDERBATHRIM
2-8
Tighten Allen screw on each LOWERBRACKET
TOLEAVEvCMOFSPACEAS
shown in the illustration.
2-9
2EPEATSTEPSTOFORTHELEFTAND
right panels.
2-10
,EAVEvCMOFSPACEon each
SIDEOFTHECENTERPANEL
2-11
)FYOUORDEREDTHESTEPplace acrylic
FOOTINGALONGTHETOEKICKCENTERAND
SCREWTOTHEmOOR
2-6
2-7
2-8
2-10
2-12 0LACEWOODINSERTONFOOTING
3/16"
2-11
52
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
S KIR T S | O W N E R ’ S M A N U A L
BASA DUO ® - I N STA L L ATI ON
BASA DUO®
INSTALLATION
1. INCLUDED PARTS
1-1
Basa Duo® bath
1-2
Basa Duo®SKIRT
1-1
2. INSTALLATION
2-1
)NSERTUPPERPARTOFSKIRTWITHTOPHOOKS
HOLDINGTHEUPPERPARTOFBATHFRAME
2-2
,OWERSKIRTINORDERFORHOOKSTOrest
AGAINSTLOWERPARTOFBATHFRAME
1-2
!DJUSTTHEHEIGHTOFSKIRTBYraising or
LOWERINGTHELOWERHOOKSANDSECURING
them into place at the desired height by
using the provided wing nuts.
2-1
SKIRTS
2-2
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
53
O W N E R’S MAN U AL | T H E MI A ® SERI ES CON TROLS
MI A ® & MI A P L U S ® CO NT RO L S - I NS TA L LATIO N
MIA® & MIAPLUS® CONTROLS
INSTALLATION
REQUIRED TOOLS
1
&INETEETHJIGSAW
2
Drill
3
1/4 in. drill bit
LOCATION
Determine the most convenient location, on either
THEWALLORTHEDECKTOINSTALLTHECONTROLMODULEOR
CONSULTTHESPECIlCATIONSSHEETFORTHESUGGESTED
LOCATION4OAVOIDDRILLINGINANAIRINTAKEZONEORAN
ELECTRICCOMPONENTALWAYSCHECKUNDERTHEDECK
BEFOREDRILLING)FYOUHAVETOINSTALLTHECONTROLTOTHE
WALLREMOVETHEPROTECTIVElLMOFSTICKERBEHINDTHE
control. You can add a silicone bead to secure it.
DRILLING
2EFERTOTHEDRILLINGTEMPLATEon the last pageFORTHE
LOCATIONANDDIAMETEROFTHEHOLES
T H E MIA ® S ERIES CONTROLS
INSTALLING THE TOUCHPAD
1
Push wiring through drilled holes.
2
2EMOVEPROTECTIVElLMFROMWATERTIGHT
seal.
3
Secure touchpad into place on either the
podium or the wall by using 2, 8-32 x 1”
studs and 2 wing nuts.
4
4IGHTENSUFlCIENTLYTOINSURESEALISAIRTIGHT
WARNING
54
s)FCONTROLWASNOTFACTORYINSTALLEDit will be attached to the turbine.
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E MIA ® SE R I E S C ON TR OL S | O W N E R’S MAN U AL
MIA ® - USE R GU I DE
MIA®
USER GUIDE
ON/OFF
On
0RESSTHEONOFFKEY to start or to stop the turbine and the Mia® control panel.
ADJUST AIR JET PRESSURE
!IRJETPRESSURECANBEADJUSTEDFORMAXIMUM
COMFORTANDAREMARKABLYEFFECTIVEMASSAGE
$EFAULTPRESSUREISSETTO
Increase or decrease the pressureOFTHEAIRJETS
by repeatedly pressing the or KEYSUNTILTHE
desired intensity is reached.
The Mia® control panel comes standard with the
following baths:
s!ZUR
s"ASATM
s4HALASSA
TO ACTIVATE THE DRYING CYCLE
4HISFUNCTIONCOMPLETELYDRAINSTHECONDUITSAND
DRIESTHEMFORSECONDSREGARDLESSOFWHETHER
or not the system was activated. By eliminating any
WATERLEFTINTHECONDUITSTHEDrying cycle ensures
PERFECTHYGIENE
MAIN FUNCTIONS
s)NCREASEORDECREASEAIRJETPRESSURE
s Activate Drying cycleFUNCTION
s.OSTAGNANTWATER
THE MIA ® SERIES CO NT RO L S
s.OWATERLEFTOVERFROMTHEPREVIOUSBATH
To activate the Drying cycle, press
.
4HEOPERATIONWILLCEASEAFTERSECONDS)FYOU
DONOTACTIVATETHEFUNCTIONTHEDRYINGPROCESS
WILLBEGINAUTOMATICALLYAFTERMINUTES)FTHE
BATHISUSEDFORSOAKINGONLYACTIVATETHEDRYINGCYCLE
manually by pressing
. You can use the Drying
cycleFUNCTIONIMMEDIATELYAFTERA(YDROTHERMO
massageTM session or whenever you wish.
NOTE
s4HEHEATFORTHEHEATEDBACKRESTISCONTROLLEDSIMULTANEOUSLYWITHTHEINTENSITY
OFTHEJETPRESSURE
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
55
O W N E R’S MAN U AL | T H E MI A ® SERI ES CON TROLS
MI A P L U S ® - U S E R GUIDE
MIAPLUS®
USER GUIDE
KEYS AND FUNCTIONS
0RESSTHISKEYTOSTARTORTOSTOPTHETURBINEANDTHE
MiaPlus® control panel.
0RESSTHISKEYTORETURNTOFUNCTIONADJUSTMENT
The MassageFUNCTIONAPPEARSONTHESCREEN
BYDEFAULT
The Mia® control panel comes standard with the
following lines of baths:
sMeridianTM
sOrigami®
0RESSEITHEROFTHESEKEYSTONAVIGATETHEMAIN
MENUOFTHE-IA0LUS® control panel.
Press the
KEYTOSEETHENEXTFUNCTION
sThermal
sAmma®
&UNCTIONSAREDISPLAYEDINTHEFOLLOWINGORDER
sTMU
sMassageAIRJETPRESSURE
sEleganciaTM
T H E MIA ® S ERIES CONTROLS
sDuration
sChroma (Chromatherapy option)
MAIN FUNCTIONS
sBackrestHEATEDBACKREST
MiaPlus®LETSYOUPERSONALIZEYOUR(YDROTHERMOMASSAGETM with
THEFOLLOWINGFUNCTIONSANDOPTIONS
s!DJUSTAIRJETPRESSURE
sCare
sSave
s3ELECTDURATIONOFSESSION
sDrying cycle
sLock
s Select light color (Chromatherapy option)
sContrast (screen contrast)
s!DJUSTBACKRESTTEMPERATURE
sLanguage
s0ERSONALIZESESSIONSETTINGSFORUPTODIFFERENTUSERS
sContact us
s0ERSONALIZEDRYINGCYCLEFORWATERJETCONDUITS
s,OCKCONTROLSWHENBATHISNOTINUSE
s!DJUSTSCREENCONTRAST
s Select display language
0RESSEITHEROFTHESEKEYSTONAVIGATETHEOPTIONS
OFEACHFUNCTION
Press the
KEYTOGOUP
Press the
KEYTOGODOWN
Settings are automatically saved until they are modified.
0RESSTHISKEYTOSAVETHESELECTEDOPTIONSAND
settings.
56
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E MIA ® SE R I E S C ON TR OL S | O W N E R’S MAN U AL
MIAPLUS ® - US ER GU I DE
MASSAGE
4HISFUNCTIONALLOWSTHEUSERTOREGULATEAIRJET
PRESSUREFORPERSONALIZEDCOMFORTANDAREMARKABLY
EFFECTIVE(YDROTHERMOMASSAGETM4HEDEFAULTPRESSUREISTHESAMEFORTHEPREVIOUSBATH
Increase or decrease the pressureOFTHEAIRJETS
by repeatedly pressing the or KEYUNTILTHE
desired pressure is reached. Pressure increases
ININCREMENTS
Pressing
is optional.
DURATION
4HISFUNCTIONLETSYOUPROGRAMTHEDURATIONOFYOUR
BATHFROMTOMINUTES4HESELECTEDDURATION
will remain in the memory until it is modified.
To select the Duration, press the KEYONTHE
menu until the DurationFUNCTIONISDISPLAYED
Select the desired duration using the
Pressing
or
KEYS
is optional.
KEYTORETURNTO
CHROMA (OPTION)
4HISFUNCTIONUSESCOLORTOPROVIDEINCREASED
COMFORTTOBODYANDSOUL
THE CHROMA FUNCTION FEATURES EIGHT OPTIONS
s /FF
$EACTIVATESTHECHROMATHERAPYFUNCTION
To use the ChromaFUNCTIONPRESSTHE KEYON
the menu until the ChromaFUNCTIONAPPEARSON
the screen.
s 6IOLET
)MMUNIZINGANDRELAXING"OOSTSTHEIMMUNESYSTEM
detoxifies the body, and reduces stress.
s "LUE
3OOTHINGANDRELAXING2EDUCESARTERIALPRESSUREAND
hyperactivity and soothes the soul.
s To turn off the Chroma FUNCTION
select Off. screen.
s 'REEN
0ROVIDESCALMANDBALANCE2ELAXESENTIREBODYAND
STABILIZESEMOTIONS
s 9ELLOW
$IGESTIONANDCREATIVITY(ELPSDIGESTIONANDREGULARITYAND
calms brain activity.
s /RANGE
(EALINGANDPAINRELIEF"OOSTSRESPIRATORYSYSTEMAND
soothes aching muscles.
s 2ED
3TIMULATINGANDEXCITING!CTIVATESCIRCULATIONANDWAKESUP
the senses.
s 3CAN
'OESTHROUGHEACHCOLORINTURN
s The Chroma FUNCTIONWILLTURNOFFBYITSELFAFTER
4 hours.
NOTE
s3HOULDYOUNOTSEETHECOLORSONTHESCREENPRESSING the first time will start the color scan.
0RESSINGASECONDTIMEWILLFREEZETHELIGHTSONTHEIRCOLORANDTHETHIRDTIMEWILLTURNTHELIGHTSOFF
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
57
THE MIA ® SERIES CO NT RO L S
Use the arrows or or the
the basic Massage screen.
O W N E R’S MAN U AL | T H E MI A ® SERI ES CON TROLS
MI A P L U S ® - U S E R GUIDE
CHROMA (NEXT)
Choosing a color
Choose the desired color using the
Press
KEYS
and
TOVALIDATEYOURCHOICEOFCOLOR
Selecting Scan
or
Select the Scan option using the
Press
KEYS
to validate your choice.
KEYto return to
Use the arrows or or the
the basic Massage screen.
BACKREST
&ORMAXIMUMRELAXATIONANDEXCEPTIONALCOMFORT
ONEORTWOHEATEDBACKRESTSCANBEINSTALLEDIN
your bath and heated individually.
KEY
Select the BackrestFUNCTIONBYPRESSINGTHE
until the BackrestFUNCTIONISDISPLAYED
T H E MIA ® S ERIES CONTROLS
&OUROPTIONSAREAVAILABLE
s/FF
s,OW
s-EDIUM
s(IGH
NOTE:-ODELSWITHBACKRESTSWILLSPECIFYBACKREST
ANDBACKREST
Choose the desired option using the
Press
or
KEYS
to validate your choice.
Use the arrows or or the
the basic Massage screen.
KEYTORETURNTO
NOTE: Selecting the Off option WILLTURNOFFTHE
BACKRESTS
58
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E MIA ® SE R I E S C ON TR OL S | O W N E R’S MAN U AL
MIAPLUS ® - US ER GU I DE
CARE
4HISFUNCTIONLETSYOUVARYAIRJETINTENSITYFORADEEPER
or gentler massage.
To select the CareFUNCTIONPRESSTHE KEY
on the menu until the CareFUNCTIONAPPEARS
3IXOPTIONSAREAVAILABLE
s Massage – Even intensity throughout
the session
s Wave – *ETINTENSITYCYCLESFROMTO
maximum desired intensity
s Bather 1, 2, 3, 4 – Stores each
bather’s selection
KEYSTOSELECTANOPTION
Use the
or
Press
to validate your choice.
Use the arrows or or the
the basic Massage screen.
KEYTORETURNTO
SAVE
THE MIA ® SERIES CO NT RO L S
The MiaPlus®CONTROLSYSTEMLETSYOUSAVEUPTOFOUR
PERSONALIZEDPRESETS4HISSAVEFUNCTIONLETSYOU
conveniently preselect settings adapted to various
USERSORPURPOSES3IMPLYSETTHEFUNCTIONSAND
options according to your tastes and save them
UNDER"ATHER"ATHERETC4HESEPERSONALIZED
settings will stay saved until modified.
3ELECTABATHERANDSAVEPERSONALIZEDSETTINGS
Press the KEYONTHEMENUUNTILTHESave
FUNCTIONAPPEARS
Use the
Press
or
KEYSto select a user number.
.
Use the arrows or or the
the basic Massage screen.
KEYTORETURNTO
2EPEATTHESESTEPSFOREACHUSER
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
59
O W N E R’S MAN U AL | T H E MI A ® SERI ES CON TROLS
MI A P L U S ® - U S E R GUIDE
DRYING CYCLE
4HISFUNCTIONCOMPLETELYDRAINSTHECONDUITSAND
DRIESTHEMFORSECONDS"YELIMINATINGANY
WATERLEFTINTHECONDUITSTHEDrying cycle
ENSURESPERFECTHYGIENE
s .OSTAGNANTWATER
s .OWATERLEFTOVERFROMTHEPREVIOUSBATH
Drying is mandatory after a Hydro-thermo
massageTM session.
4WOOPTIONSAREAVAILABLE
s$AILY
s!FTER"ATH
Even when the daily drying cycle is programmed,
THEAUTOMATICDRYINGCYCLEWILLACTIVATEAFTER
each use.
Select After Bath
T H E MIA ® S ERIES CONTROLS
The After Bath option lets you program the
Drying cycleTOSTARTUPTOMINUTESAFTERABATH
To select the After Bath option, press the KEY
on the menu until the Drying cycleFUNCTION
appears.
Use the
option.
Press
and
KEYSTOSELECTthe After Bath
.
Dry Delay is displayed.
Press the
minutes.
Press
KEYTOSELECTAVALUEFROM5 to 60
to validate.
Use the arrows or or the
the basic Massage screen.
KEYTORETURNTO
)FNOVALUEISSELECTEDTHEDrying cycle will start
UPAUTOMATICALLYMINUTESAFTERTHEBATH
60
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E MIA ® SE R I E S C ON TR OL S | O W N E R’S MAN U AL
MIAPLUS ® - US ER GU I DE
DRYING CYCLE (NEXT)
Select Daily
The DailyOPTIONLETSYOUDRYANDCLEANTHEAIRJET
SYSTEMCONDUITSATASPECIlCTIMEOFDAYRATHER
THANWITHINANHOUROFA(YDROTHERMOMASSAGETM
session.
To select the Daily option, press the KEYONthe
menu until the Drying cycle option appears.
Use the
Press
and
KEYSTOSELECTthe Daily option.
.
Start Time is displayed.
Use the or KEYSTOSELECTTHETIMEOFDAYTHE
Drying cycleFUNCTIONSHOULDSTART
Press
.
Current Time is displayed.
Press and hold the or KEYSORPRESSTHEM
repeatedly to set the preprogrammed current time
in 10 minute slots.
.
THE MIA ® SERIES CO NT RO L S
Press
Once the Daily option is set, the Drying cycle will
start every day at the same time until the setting is
modified.
Use the arrows or or the
the basic Massage screen.
KEYTORETURNTO
NOTE:4HETIMEFORMATISPRESETASFOLLOWS
French: 24 hour
English: 12 hour (AM and PM)
Spanish: 24 hour
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
61
O W N E R’S MAN U AL | T H E MI A ® SERI ES CON TROLS
MI A P L U S ® - U S E R GUIDE
LOCK
4HISFUNCTIONLETSYOULOCKTHECONTROLSYSTEM
INORDERTOPREVENTTHETURBINEFROMSTARTING
unexpectedly or accidentally.
)TISALSOACHILDSAFETYDEVICEASITPREVENTS
CHILDRENFROMSTARTINGTHETURBINEBYPRESSING
the
KEY
To activate the LockFUNCTION
Press the KEYONTHEMENUUNTILTHELock
FUNCTIONAPPEARS
KEYSTOSELECTthe Activate option.
Use the
or
Press
to validate your choice.
When you stop the bath, the LockFUNCTIONLOCKSthe
KEYMAKINGITIMPOSSIBLETORESTARTTHETURBINE
To restart the turbine when the Lock function
is activated
KEY
Press the
T H E MIA ® S ERIES CONTROLS
Lock is displayed. Press
.
The turbine starts.
To deactivate the LockFUNCTION
Press the KEYONTHEMENUUNTILTHELock
FUNCTIONAPPEARS
Use the
Press
and
KEYSTOSELECTthe Off option.
.
CONTRAST
4HISFUNCTIONCONTROLSTHEBRIGHTNESSOFTHE-IA0LUS®
display screen. No matter which setting you select,
THESCREENISALWAYSCLEARANDEASYTOREADFROM
ANYANGLEREGARDLESSOFTHELIGHTINGCONDITIONSOF
the room where your bath is installed.
62
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E MIA ® SE R I E S C ON TR OL S | O W N E R’S MAN U AL
MIAPLUS ® - US ER GU I DE
CONTRAST (NEXT)
NOTE: The screen automatically dims AFTER
2 minutes.
To set display screen contrast, press the or
KEYONTHEMENUUNTILTHEContrastFUNCTION
appears.
NOTE: Use the KEYTOACCESSTHISFUNCTIONMORE
QUICKLYWHENYOUSTARTTHETURBINE
Press or until the desired PERCENTAGEOF
contrast is displayed.
Press
to validate your choice.
Use the arrows or or the
the basic Massage screen.
KEYto return to
LANGUAGE
THE MIA ® SERIES CO NT RO L S
The MiaPlus®CONTROLSYSTEMLETSYOUSELECTONEOF
THEFOLLOWINGTHREEDISPLAYLANGUAGES
s&RENCH
s%NGLISH
s3PANISH
NOTE:4HEFACTORYSELECTEDLANGUAGEIS%NGLISH
To choose the display language, press the or
KEYONTHEMENUUNTILTHELanguageFUNCTION
appears.
NOTE: Use the KEYTOACCESSTHISFUNCTIONMORE
QUICKLYWHENYOUSTARTTHETURBINE
Press
or
Press
.
to select your desired language.
Use the arrows or or the
the basic Massage screen.
CONTACT US
KEYTORETURNTO
Feel free to contact Bain Ultra for any information you may
need about your Thermomasseur® bath and the MiaPlus®
control system.
Simply call the telephone number that appears on this screen
for answers to any question.
1.800.463.2187
BainUltra® wishes you complete relaxation!
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
63
O W N E R’S MAN U AL | T H E MI A ® SERI ES CON TROLS
MI A MU LT I ® - U S E R GUIDE
MIAMULTI®
USER GUIDE
MIAMULTI®
The MiaMulti®CONTROLFEATURESTHEsame functions
as the MiaPlus®, but also comes with a convenient
ANDEASYTOUSEREMOTECONTROL9OUENJOYALLTHEBENElTS
OFAPERSONALIZED(YDROTHERMOMASSAGETM without
HAVINGTOLEAVETHEBATH*USTLIEBACKANDRELAX
REMOTE - HYDRO-THERMO MASSAGETM
1.
Key
T H E MIA ® S ERIES CONTROLS
Operates the remote
+ key
2.
Backrest 1
)NCREASESTHETEMPERATUREOFBACKREST
3.
Backrest 1
$ECREASESTHETEMPERATUREOFBACKREST
– key
+ key
4.
Backrest 2
)NCREASESTHETEMPERATUREOFBACKREST
5.
Backrest 2
$ECREASESTHETEMPERATUREOFBACKREST
6.
Blower
)NCREASESAIRJETPRESSURE
7.
Blower – key
$ECREASESAIRJETPRESSURE
8.
Duration key
3ELECTSBATHDURATION0RESSTHEKEYTO
increase bath duration. Each time you
PRESSTHEKEYYOURBATHTIMEINCREASES
5 minutes, to the nearest round number.
BATH
BAIN
– key
+ key
9.
Chroma key
3ELECTSTHECHROMATHERAPYFUNCTION
4OCHANGETHECOLORPRESSTHEKEYUNTIL
the desired color is displayed.
64
1
1 800 463.2187
2
6
3
7
4
8
5
9
NOTE: To work efficiently, the
remote must be pointed
toward the MiaMulti®
wall-mounted control
in the room where your
bath is.
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T H E MIA ® SE R I E S C ON TR OL S | O W N E R’S MAN U AL
MIAMULTI ® - U SER GU I DE
PROGRAMMING PROCEDURE
FOR REMOTE CONTROLLER 2011 AND UP
PROGRAMMING MIAMULTI® - BATH
0RESSKEYBATH/BAIN
Red light
87J>
76>C
0RESSKEYMINUS
ANDKEEPITPUSHED
BATH
BAIN
0RESSKEY0/7%2
ANDKEEPBOTHKEYS
PUSHEDFORSECONDS
/NCEREDLIGHTISSWITCHEDONRELEASEBOTHKEYS
)MMEDIATELYPRESSKEYSSEQUENCE
2EDLIGHTWILLSWITCHOFFATEVERYKEY
Once sequence is terminated, red light will stay
SWITCHOFF
THE MIA ® SERIES CO NT RO L S
NOTE: To work efficiently, the remote must be pointed toward the
MiaMulti® wall-mounted control in the room where your bath is.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
65
O W N E R’S MAN U AL | MAI N T EN A NCE
MAINTENANCE
ACRYLIC
Technical information
s!LL"AIN5LTRA® ThermoMasseurs®AREMADEOF
Lucite acrylic.
Maintenance
s#LEANACRYLICWITHAMILDNONABRASIVEPRODUCT
s!BRASIVEPRODUCTSSUCHASPOWDERPAINTTHINNERS
terpentine and gas can damage the shine and
LUSTREOFTHEACRYLIC
s&ORPARTICULARLYTOUGHSTAINSUSEASMALLAMOUNT
OFWOODALCOHOLMETHYLHYDRATE
The BainUltra® ThermoMasseur® is as simple to
care for as a conventional acrylic bath. There are
no pumps, valves, pipes, nor accessories to take
apart or clean. Thanks to its design, the system is
perfectly hygienic and completely dry. The automatic
and programmable drying cycles completely empty
the air channel. No standing water. Nothing left
over from the previous bath. The user does not
have to worry about the air channels nor the
turbine. Simply clean the surface of the bath with
a non-abrasive cleanser.
Safety instructions
s7HENAPPLYINGWOODALCOHOLMETHYLHYDRATE
use gloves to protect hands. Rince thoroughly
AFTERUSE
s%NSURETHATESSENTIALOILSOROTHERTHERAPEUTIC
products added to bath water will not damage
the acrylic finish.
Scratch
Paper grade 220
Paper grade 400
Paper grade 600
ACRYLIC (MINOR REPAIRS)
Paper grade 800
Maintenance
s&ORMINORSURFACEDAMAGEUSEAPOLISHINGPUTTY
FORACRYLICSURFACESORAUTOMOBILES
Paper grade 1200
Safety instructions
Polish
s&OLLOWPOLISHMANUFACTURERSINSTRUCTIONS
MA I NT ENA NCE
Table - Sandpaper grade
IMPORTANT
66
s!NYPRODUCTADDEDTOYOUR4HERMO-ASSEUR®MUSTBEDISSOLVEDINTHEWATERORIFNOTBEMIXED
WITHANEMULSIlERSEETHE4HERAPY'UIDEFORMOREDETAILSINORDERTOENSURETHELONGEVITYOF
YOURBATHSACRYLICASWELLASTHEEFlCIENCYOFITSSYSTEMALONGWITHTHEEXCEPTIONALQUALITYOF
CAREOFFEREDBYYOUR"AIN5LTRA® bath.
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
M A IN T EN A N C E | O W N E R ’ S M A N U A L
ACRYLIC (DEEPER SCRATCHES)
Maintenance
s&ORSLIGHTLYDEEPERSCRATCHESSANDTHESPOTWITH
AWETSANDPAPERBEFOREPOLISHING
s$EPTHOFABRASIONORSCRATCHWILLDETERMINEGRADE
OFSANDPAPERREQUIRED
- Slight to moderate damage — grade 600, 800,
then 1200 sandpaper
- Deeper damage — grade 400, 600, 800, then
1200 sandpaper
s7HENSANDINGSTARTWITHLOWESTGRADESANDPAPER
EGWORKINGYOURWAYUPASYOUSANDA
slightly larger area with each new grade. Finish
with polishing putty.
ACRYSTALTM MYBODYRESTTM
COMPONENTS (FOR TEKURATM)
WOOD MYBODYRESTTM COMPONENTS
(FOR TEKURATM)
Maintenance
s#OMPONENTSSHOULDBECLEANEDWITHADAMP
CLOTHORWITHAVERYMILDSOAPIFREQUIRED!VOID
ANYHARSHCLEANINGPRODUCTS3IMPLYSPONGEOFF
ANYlLMORRESIDUESTHATARELEFTONTHEWOOD
AFTERUSE
CEDAR WOOD (TMU 5454/6060)
Technical information
s4HECEDARWOODCOMPONENTSSTEPANDORSHELF
are protected by a highly durable and resilient
COATOFCATALYZEDPOLYURETHANE
s4HISPROTECTIVECOATINGISDESIGNEDFORAHIGH
humidity environment and ensures a long-lasting,
stain and water resistant finish.
Maintenance
s4HE!CRYSTALTM MyBodyRestTMKITREQUIRESTHESAME
easy maintenance as our other acrylic (standard)
parts (See page 76)
s#LEAN!CRYSTALTM components using a mild, non
ABRASIVECLEANINGPRODUCTSUCHASTHOSEUSEDFOR
GLASSANDMIRRORSANDASOFTCLOTH
SYSTEM
Technical information
s!NAUTOMATICDRYINGCYCLESTARTSMINUTESAFTER
EACHUSEENSURINGTHEDRYNESSOFTHECHANNEL
s)TISNORMALTOHEARTHETURBINEWORKINGATA
CERTAINTIMEOFDAY4HISMEANSTHATTHEDRYING
cycle has been programmed.
Maintenance
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
M A IN TEN A N CE
sBainUltra® recommends to start the drying
cycle everytime the bath is used as a shower
or just to soak.
67
O W N E R’S MAN U AL | MAI N T EN A NCE
CEDAR WOOD (TMU 5454/6060) NEXT
Maintenance
s4OPROTECTTHEWOODlNISHDONOTLEAVEANY
SOAPSORDETERGENTSONWOODSURFACESFORLONG
PERIODSOFTIME
s#LEANTHEWOODWITHMILDSOAPANDACOTton
cloth. Do not use abrasive or corrosive products.
LYPTUS WOOD (AYOURA®)
Technical information
s4HE!YOURA®FREESTANDINGMODELHASALIPMADE
OF,YPTUSWOODTREATEDWITHPOLYURETHANEOIL
s,YPTUSWOODISKNOWNFORITSRESISTANCETO
moisture and mildew.
Maintenance
s5SEPOLYURETHANEOILORANOTHERNATURALOIL
(e.g., Watco, Varathane) available in a hardware
store.
s!PPLYWITHARAG
MA I NT ENA NCE
s"UFFTOTIMESPERYEAR
68
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T R O U B LES H OOTI N G | O W N E R ’ S M AN U AL
Your BainUltra® ThermoMasseur® has been
manufactured and inspected with the greatest
care. In addition, it has been thoroughly tested
on a test bench to offer you a product of superior
quality satisfying your highest expectations. The
following troubleshooting chart will assist you
in correcting a problem. If you continue to have
problems, contact your retailer or the manufacturer.
SITUATION
Your bath will not start.
SOLUTIONS
s-AKESUREBREAKERISh/.v
s3HUTOFFANDRESTARTBREAKER
s#HECKJUNCTIONBOXCONNECTIONSTOBATHFOR#ANADAONLY
Breaker trips continually.
s-AKESURETHATYOURBATHISTHEONLYAPPLIANCECONNECTED
to circuit.
s#HECKFORASHORTCIRCUITBETWEENBATHANDBREAKERBOX
s"REAKERMAYTOOSENSITIVEDEFECTIVEOROLD4RYANEW
BREAKER4HISCOMPONENTMUSTBENEW
Turbine stops working after only a few minutes.
Turbine and air-heater are equipped with heat sensors
DESIGNEDTOCUTOFFPOWERINCASEOFOVERHEATING)NSUFlCIENT
air circulation may be the cause.
s-AKESURETURBINEHASSUFlCIENTVENTILATION
s-AKESURETURBINEINTAKEISNOTOBSTRUCTED
A few airjets do not work at lowest speeds.
4OMEETEVERYONESNEEDSPARTICULARLYTHOSEOFCHILDREN
YOURBATHISDESIGNEDTOWORKATAVERYLOWSPEED!IRJETSIN
HALFSEATORTHOSECLOSESTTODRAININ4-5MODELSESPECIALLY
larger models, may remain inactive at lowest speeds. This is
normal and can be easily remedied by slowly raising speed
TOhOPENvINACTIVEAIRJETSANDTHENLOWERINGITTODESIRED
level. Furthermore, your bath is pre-programmed in the
FACTORYATALOWREGULARORHIGHINTENSITYDEPENDINGONTHE
SIZE4OCHANGETHEINTENSITYLEVELPLEASECONTACT"AIN5LTRA®
DIRECTLY#ERTAINCONDITIONSMAYAMPLIFYTHISOCCURRENCE
s#HECKFORTURBINEINTAKEOBSTRUCTIONTOOGREATADISTANCE
between turbine and bath, too many directional changes
ELBOWSANDIFADEQUATEPIPINGHASBEENUSED3EE
TURBINE RELOCATION paragraph.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
69
TR O UBLESH O O TIN G
TROUBLESHOOTING
TR O UBLESH O O TIN G
O W N E R’S MAN U AL | T ROU B L ESH OO TING
SITUATION
SOLUTIONS
4EMPERATUREOFAIRINJECTEDINTOBATHISDIRECTLYPROPORTIONAL
TOTHESPEEDOFTHETURBINE4HEHIGHERTHESPEEDTHE
WARMERTHEAIRIS!SIMPLEWAYTOCHECKIFYOURAIRHEATEROR
HEATERSAREWORKINGPROPERLYISTOTURNONTHESYSTEMATTHE
HIGHESTSPEEDIFYOURCONTROLOFFERSARANGEOFINTENSITIES
WITHNOWATERINTHEBATHTHEREISABSOLUTELYNORISKTOTHE
SYSTEM!FTERTOMINUTESTHEHEATEDBACKRESTOR
BACKRESTSSHOULDBEWARMTOTHETOUCHANDJETSSHOULDALSO
seem warm when you bring your hands close to them.
Air jets seem cool.
s#HECKTHETURBINEAIRINTAKE)TSHOULDNOTBETOOCOLDNOR
too warm. Ideally, the temperature should be between
72°F (20°C) and 86°F (30°C).
s#HECKTHATDISTANCEBETWEENTURBINEANDBATHISNOTTOO
GREAT)FPOSSIBLEINSULATEAIRLINEALONGITSENTIRELENGTH
3EETURBINEINSTALLATIONSECTIONOFTHISMANUAL
!N,%$HASAHOURLIFECYCLE
s6ERIFYWIRINGANDCONNECTIONS
LED does not work.
IMPORTANT: THESE INSTRUCTIONS ONLY APPLY IF
THE LED CAN BE ACCESSED FROM BATH
EXTERIOR.
s5PONVERIlCATIONIF,%$STILLDOESNOTWORKDISCONNECT
ANDREPLACETHE,%$BYDOINGTHEFOLLOWING
2EMOVETHE,%$MODULEBYPULLINGONTHEWHITEPARTOF
THEPLUG)FTHEMODULEISDIFlCULTTOREMOVEUSEAPAIROF
vice-grips.
$ETACHTHEWIREFROMTHEBATH
5NPLUGTHEWIREFROMTHECHROMATHERAPYCONTROLMODULE
- Plug the wire into the chromatherapy control module.
0LUGTHE,%$MODULEBACKINTOITSSOCKET
NOTE: IT IS NOT NECESSARY TO REATTACH THE WIRE
TO THE BATH.
70
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
W A R R A NT Y | O W N E R ’ S M A N U A L
THE BAINULTRA® LIMITED WARRANTY
LIMITED WARRANTY
4HISLIMITEDWARRANTYISEXTENDEDONLYTOTHEORIGINALPURCHASEROFTHEUNITUNDERWARRANTYANDISVALIDONLYWHENBOUGHT
THROUGHANDREGISTEREDBYANAUTHORIZED"AIN5LTRA® retailer. BainUltra®PRODUCTSAREDESIGNEDFORRESIDENTIALUSEONLY"AIN5LTRA®
PRODUCTSUSEDFORCOMMERCIALORDISPLAYAPPLICATIONSWILLBELIMITEDTOATWOYEARWARRANTYAGAINSTDEFAULTSINMATERIALS
ANDWORKMANSHIPREGARDLESSOFTHEVARIOUSDEFECTIVECOMPONENTSOFTHEPRODUCTS"AIN5LTRA®PRODUCTSSOLDOUTSIDEOF.ORTH
!MERICAWILLBELIMITEDTOAPARTSONLYWARRANTYTHROUGHTHEDEALEROFTHESALE/URSERVICEDEPARTMENTWILLHELPDIAGNOSETHE
PROBLEMANDWILLPROVIDEPARTSONLYFORREPAIRSORREPLACEMENTSCOVEREDBYTHEWARRANTY!LLPARTSWILLBESHIPPEDTOTHEDEALER
in North America. BainUltra®WILLNOTBERESPONSIBLEFORCOSTOFSHIPPINGORSERVICINGOUTSIDEOF.ORTH!MERICA
&ORWOODENPARTSOFCERTAINMODELSANDFOR-Y"ODY2ESTTMKIT"AIN5LTRA)NCGUARANTEESTHATINTHEIRORIGINALMANUFACTURING
FORMTHESEPARTSAREFREEOFANYMANUFACTURINGDIMENSIONALORSTRONGLYAPPARENTNATURALDEFECTSFORAONEYEARPERIOD
FROMTHEORIGINALPURCHASEDATE
EXCLUSIONS
The above-stated limited warranty applies as long as damage ISNOTCAUSEDBYANACCIDENTABUSEMISUSElREINSECTSUSEOF
ABRASIVEPRODUCTSFORCEMAJEUREORANACTOF'OD4RANSPORTHANDLINGORINSTALLATIONDAMAGESAREALSOEXCLUDED!NYPARTTHAT
MUSTBECHANGEDDURINGTHEWARRANTYPERIODWILLBECOVEREDBYTHEORIGINALWARRANTYORFORATWOYEARPERIODFOLLOWING
replacement, according to the first contingency.
"ECAUSEOFTHEIRORGANICNATUREWOODCOMPONENTSWILLEXPANDANDCONTRACTWITHseasonal changes and normal heating
variations. With time, normal exposure to sunlight will slightly alter the wood tint. These changes are not covered by the warranty.
4HEVINYLSURFACEANDTHESHEETOF!YOURA®’s optional massage table are not covered by this warranty.
-OREOVERTHISWARRANTYISVOIDIFYOUR"AIN5LTRA® ThermoMasseur® bath, your Vedana®ORYOUR4EMAZKAL®, or any other BainUltra®
product is installed by anyone but a licensed contractor.
4HISWARRANTYISALSOVOIDIFYOUR"AIN5LTRA® bath, your Vedana®YOUR4EMAZKAL®, or any other BainUltra®PRODUCTORPARTTHEREOF
HASBEENMODIlEDORIFANYREPAIRSHAVEBEENATTEMPTEDBYANYONEOTHERTHAN"AIN5LTRA)NCANAUTHORIZEDDEALERORREPRESENTATIVE
OF"AIN5LTRA)NC!NYANDALLCOMPONENTSTHATARENOTPROVIDEDBY"AIN5LTRA)NCASWELLASANYITEMSATTACHEDORINSTALLEDON
your BainUltra® ThermoMasseur®, your Vedana®ORYOUR4EMAZKAL®, or on any other BainUltra®PRODUCTAFTERTHEDATEOF
MANUFACTUREAREEXPRESSLYEXCLUDEDFROMTHISLIMITEDWARRANTY
4HEWARRANTYISVOIDIFTHEUNITISINSTALLEDOUTDOORSORHASNOTBEENINSTALLEDINACCORDANCEWITHTHEMANUFACTURERSINSTRUCTIONS
and/or in compliance with local codes and ordinances.
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
71
W AR R ANTY
Your BainUltra® ThermoMasseur®ORSOAKINGBATHISCOVEREDBYTHEBESTWARRANTYINTHEindustry. BainUltra Inc. guarantees the
ACRYLICANDMOTORTURBINEOFYOURBATHFORATWENTYYEARPERIODFROMTHEORIGINALPURCHASEDATEAGAINSTDEFECTSINMATERIALS
ANDWORKMANSHIP)NTHECASEOFTHEELECTRONICCOMPONENTSOFTHE4HERMO-ASSEUR®, the Vedana®ORTHE4EMAZKAL® and the
MASSAGETABLEFORTHE!YOURA®"AIN5LTRA)NCGUARANTEESAGAINSTDEFECTSINMATERIALSANDWORKMANSHIPFORAlVEYEARPERIOD
FROMTHEORIGINALPURCHASEDATE
O W N E R’S MAN U AL | W ARR ANTY
W ARR AN TY
PROCEDURE
!NYDEFECTINVOLVINGTHEMANUFACTURERSLIABILITYSHALLBEREPORTEDTO"AIN5LTRA)NCWITHINTENDAYSOFITSOCCURRENCE5NITS
CLAIMEDTOBEDEFECTIVESHALLBEHELDUNTILINSPECTEDBYANAUTHORIZEDREPRESENTATIVEOF"AIN5LTRA)NCANDUPONTHEIRSPECIlC
INSTRUCTIONSUNITSFOUNDTOBEDEFECTIVEWILLBEREPAIREDORREPLACEDAT"AIN5LTRA)NCSCHOICE4HELIABILITYOF"AIN5LTRA)NCWITH
RESPECTTOTHESALEOFTHISUNITSHALLBELIMITEDTOREPAIRORREPLACEMENTBYASIMILARPRODUCTASPROVIDEDABOVEANDDOESNOT
INCLUDEANYCOSTOFREMOVALREINSTALLATIONTRANSPORTOFDEFECTIVEPRODUCTLOSSOFTIMESALARYORANYOTHEREXPENSESASWELLAS
ANYCONSEQUENTIALDAMAGESOFANYKIND"AIN5LTRA)NCANDITSREPRESENTATIVESSHALLNOTBEHELDLIABLEFORANYINJURYLOSSCOST
OROTHERDAMAGEWHETHERCONSEQUENTIALORINCIDENTALTHATARISEFROMANYDEFECTCOVEREDUNDERTHISLIMITEDWARRANTYEVENIF
"AIN5LTRA)NCHASBEENADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE!NADEQUATEACCESSWAYTOMECHANICALANDELECTRICALPARTS
OFYOUR"AIN5LTRA® ThermoMasseur®BATHYOUR4EMAZKAL®, or any other BainUltra® product must be anticipated and prepared
BEFOREANAUTHORIZEDREPRESENTATIVEARRIVESONTHEPREMISESTOCARRYOUTAREPAIR4HECOSTSINCURREDTOPROVIDEACCESSTOTHE
motor turbine, the electronic module or the heating system will not be covered by this warranty.
LIMITATIONS
4HISLIMITEDWARRANTYREPLACESALLOTHERWARRANTIESEXPRESSEDORIMPLIEDINFACEORATLAWINCLUDINGIMPLIEDWARRANTIESOF
MERCHANTABILITYANDlTNESSFORAPARTICULARPURPOSE4HETERMSOFTHISLIMITEDWARRANTYCANNOTBEMODIlEDOREXTENDEDINANY
way whatsoever by any agent, dealer, distributor, service company or other party other than BainUltra Inc.
LEGAL RIGHTS
4HISLIMITEDWARRANTYGIVESSPECIlCLEGALRIGHTSANDISNOTAPPLICABLEIFITINTERFERESWITHANYLAWORREGULATIONINANYSTATE
province or country.
72
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
D R ILLING T E M P L ATE S | O W N E R ’ S MAN U AL
MIA ® - DRILLIN G TEM PL ATES
MIA®
DRILLING TEMPLATES
IMPORTANT
[2.8 cm ± 0.1 cm]
1.688”
[4.3 cm]
1.094"± 0.04”
Drawing is to scale.
Hole Contour
Control Contour
[
1.1 cm]
0.438”
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
73
DRILLING TEMPLATES
4.094"± 0.04”
[10.4 cm ± 0.1 cm]
[10.0 cm ± 0.1 cm]
3.938"± 0.04”
5.125”
[13.0 cm]
$RAWINGOF-IA® Control hole
D R ILLING T E M P L ATE S | O W N E R ’ S MAN U AL
MIAPLUS ® & MI A M U LTI ® - DR I L L I N G TEM PL AT E S
MIAPLUS® & MIAMULTI®
DRILLING TEMPLATES
[5.5 cm]
IR could be installed at arms reach or maximum
UPTOFEETAWAYFROMTHEBATH
1 .625”
(4.1 cm)
1 .375”
(3.5 cm)
R 0.125”
(R 0.3 cm)
www.bainultra.com
Printed in Canada. Copyright © January 2011 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
75
DRILLING TEMPLATES
[13.0 cm ± 0.1 cm]
5.125” ± 0.04”
Hole Contour
Control Contour
0.875”
(2.2 cm)
[R 0.6 cm]
1 .125”
(2.9 cm)
5.591”
[14.2 cm]
$RAWINGOF)2HOLEFOR-IA-ULTI®
2.165”
$RAWINGOF-IA0LUS® and MiaMulti® control hole
(same template).
R.250” TYP 4
[4.1 cm ± 0.1 cm]
Drawing is to scale.
1.625” ± 0.04”
IMPORTANT