Avnet Embedded.
Support Around The Board™
Device Specification.
EMERSON
MITX-CORE-800
Mini-ITX Motherboard
www.avnet-embedded.eu
MITX-CORE-800
Mini-ITX Motherboard
PRELIMINARY DATA SHEET
Easy-to-use Mini-ITX
motherboard designed
for use in intelligent kiosk,
digital signage, medical cart
and slot machine applications
nn Single PGA socket for 2nd generation Intel® Core™ Processor
Family
nn Up to 8GB memory with two
DDR3 SO-DIMM sockets
nn Dual display capability from
multiple physical display connections
nn PCI Express (PCIe) expansion
via PCIe slot and PCIe Mini
Cards
The MITX-CORE-800 series of Mini-ITX motherboards from Emerson Network Power is
designed for intelligent kiosk, digital signage, medical cart and slot machine applications and offer a flexible mix of features and expansion options. Featuring the 2nd
generation Intel® Core™ Processor Family, the MITX-CORE-800 will have better power
and performance for both general and graphics processing and will be fully Intel® vPro™
certified. MITX-CORE-800 series is an important addition to the Emerson Network Power
motherboard portfolio, adding a high-performance Mini-ITX offering.
The MITX-CORE-800 series is designed with future Intel® Core™ processors in mind to
allow a seamless performance and display upgrade path to customers.
Block Diagram
PEG: 1x16; 2x8;
1x8 and 2x4
2-channel DDR3
1067/1333
ECC/non-ECC
Non-ECC
SO-DIMM
DDR3 64-bit
Non-ECC
SO-DIMM
DDR3 64-bit
2nd Gen Intel®
Core Processor
x4 PCIe (QC only)
x16 PCIe
x16
SMbus
eDP
S/PDIF
S/PDIF
Header
PECI
Mic
L/R
Audio
Ethernet
eDP
LVDS
L/R Back
Sub/Mid
Line
Mic
Audio
CODEC
HD Audio
VGA
LVDS
1GbE
PHY
82579
1GbE
LVDS
Internal
SATA
Internal
SATA
SATA 6G
PCIe x1
SMbus
PCIe x1
Ethernet
eDP
DMI
Audio
Header
FDI
Phone
DP/DVI/HDMI/SDVO
DP/HDMI
DP/HDMI
SATA 6G
Internal
SATA
SATA
SATA
Internal
SATA
2x USB
eUSB
1GbE
PHY
82574L
1GbE
SMbus
DP
DP/DVI/HDMI
DP
DP/DVI/HDMI
HD Audio
2x USB
Internal
USB
Internal
USB
2x USB
QM67 or HM65
PCH
VGA
VGA
4x
USB
USB
4x USB
PCIe
Full-Mini
Card
SMbus
PCIe x1
8x PCIe (5G)
6x PCIe (5G) + 2x USB 2.0
USB
SPI (2 CS#)
6 SATA
2x 6G, 4x 3G
SMbus
PCIe x1
PCIe Half-Mini
Card / DisplayMini Card
DisplayPort
14 USB 2.0
LPC
SPI
AMI Aptio
EFI FW
SMbus
Pwr/Rst/LED
LPC
SYS
Header
LPC Header
EC
TPM
2
SMbus
RS-232
Smart
Battery
COM
Port
Hardware Specifications
ƒƒ Safety Standards
PROCESSOR
cc
ƒƒ Single socket for 2nd generation Intel® Core™
Processor
Shall comply with UL/CSA 60950-1, EN 60950-1
and IEC 60950-1 CB Scheme
cc
Shall be certified to UL/CSA No. 60950-1 with no
deviations
MEMORY
cc
Designed to comply with IEC 60601
ƒƒ Up to 8GB with two (2) DDR3 SO-DIMM sockets with
non-ECC support
VIDEO
ƒƒ Embedded DisplayPort and LVDS header
ON-BOARD I/O
ƒƒ One (1) PCIe x16 socket that will work with a x16, x8,
x4 or x1 interface card
ƒƒ Intel® vPro™ Certification
cc
Software and Firmware Specifications
BIOS
ƒƒ UEFI-based BIOS
cc
Optional boot from SATA disk, eUSB (with
Microsoft® Windows® Embedded Standard 7 and
Linux), USB CD-ROM or PXE Network boot
cc
Optional boot without keyboard, mouse and
screen
ƒƒ Two (2) SATA 6G and two (2) SATA 3G headers
ƒƒ Four (4) USB ports on two (2) 9-pin headers
ƒƒ Two (2) USB ports on an eUSB header with suitable
mounting hole
ƒƒ PCIe Mini Card explansion with PCIe, USB and
DisplayPort connectivity (one full, two half size; or
one half size and one display)
ƒƒ TPM header
ƒƒ Audio 7.1 header and S/PDIF header
ƒƒ System LED and GPIO headers
ƒƒ 4-pin +12V DC ATX power connector
REAR I/O CONNECTIVITY
MITX-CORE-800 series shall be Intel vPro certified
SOFTWARE UTILITIES
ƒƒ A PICMG® EAPI specification compliant API
ƒƒ Demonstration utility containing temperature/
voltage monitor, watchdog, GPIO, backlight,
processor/memory frequency display, processor
throttling and graphics control APIs
ƒƒ BIOS customization tool allowing customers to
change default settings, create splash screen and
adjust screen resolution and orientation
ƒƒ Four (4) USB2.0 type A ports
OPERATING SYSTEM
ƒƒ Two (2) RJ-45 Gigabit Ethernet (one supporting
AMT)
ƒƒ Microsoft® Windows® 7 and Windows Embedded
Standard 7
ƒƒ Five (5) audio jacks and TOSlink optical connector
from HD Audio
ƒƒ Microsoft Windows XP Professional
ƒƒ Stacked VGA 15-pin connector and RS-232 COM
port
ƒƒ Two (2) DisplayPort connectors
ƒƒ Latching DC power input connector with input range
of +12V and +14V to +19.5V
ƒƒ Fedora 12
Package Contents
BIOS
ƒƒ One (1) MITX-CORE-820 motherboard (without CPU
or memory)
OPERATING TEMPERATURE RANGE
ƒƒ Two (2) SATA power cables
ƒƒ 0 °C to 55 °C
ƒƒ Two (2) SATA data cables
COMPLIANCE AND CERTIFICATION INFORMATION
ƒƒ One (1) CD containing Windows/Linux drivers and
documentation
ƒƒ EMC Compliance Standards
ƒƒ One (1) CD containing BIOS utilities.
cc
Shall compy with FCC Class B
ƒƒ One (1) Quickstart manual covering:
cc
Package contents
cc
Board layout
cc
CPU and memory installation instructions
3
Ordering Information
Part Number
Description
MITX-CORE-810
HM65 Mini-ITX PGA 2nd generation Intel® Core™ processor motherboard
MITX-CORE-820
QM67 Mini-ITX PGA 2nd generation Intel® Core™ processor motherboard
SOLUTION SERVICES
Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed
time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh.
Intel and Atom are trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows and Vista are trademarks of Microsoft Corporation. All other product or
service names are the property of their respective owners.
This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future
availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should
exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or
information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit
described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network
Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations.
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity™.
AC Power
Embedded Power
Connectivity
Infrastructure Management & Monitoring
Racks & Integrated Cabinets
DC Power
Outside Plant
Services
Embedded Computing
Power Switching & Controls
Surge Protection
Emerson Network Power
Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720
Paris, France +33 1 60 92 31 20 • Munich, Germany +49 89 9608 2333 • Tel Aviv, Israel +972 9 9560361
Hong Kong +852 2176 3540 • Shanghai, China +86 21 3395 0289 • Tokyo, Japan +81 3 5403 2730 • Seoul, Korea +82 2 3483 1500
EmersonNetworkPower.com/EmbeddedComputing
Precision Cooling
Emerson, Business-Critical Continuity and
Emerson Network Power are trademarks of
Emerson Electric Co. or one of its affiliated
companies. ©2011 Emerson Electric Co.
MITXCORE800-D0 01/11
www.avnet-embedded.eu
Avnet Embedded OFFICES.
Denmark
Avnet Embedded
Avnet Nortec A/S
Ellekær 9
2730 Herlev
Phone: +45 3678 6250
Fax: +45 3678 6255
denmark @ avnet-embedded.eu
Finland
Avnet Embedded
Avnet Nortec Oy
Tiilenpolttajankuja 3 A B
1720 Vantaa
Phone: +358 20 749 9260
Fax: +358 9 4259 7446
finland @ avnet-embedded.eu
FrancE
Avnet Embedded
Avnet EMG France SA
Immeuble 154, Parc Chene 2
5, allée du General Benoist
69500 Bron
Phone: +33 4 72 81 02 30
Fax: +33 4 72 81 02 34
bron @ avnet-embedded.eu
GERMANY (AUSTRIA, CZECH REPUBLIC,
HUNGARY, POLAND, SWITZERLAND)
Avnet Embedded
Avnet EMG GmbH
Gruber Straße 60c
85586 Poing
Phone: +49 8121 775 500
Fax: +49 8121 775 550
poing @ avnet-embedded.eu
UNITED KINGDOM (IRELAND)
Avnet Embedded
Avnet EMG Ltd.
Pilgrims Court, 15/17 West Street
Reigate, Surrey, RH2 9BL
Phone: +44 1737 227800
Fax: +44 1737 244698
uk@ avnet-embedded.eu
Avnet Embedded
Avnet EMG GmbH
Lötscher Weg 66
41334 Nettetal
Phone: +49 8121 775 500
Fax: +49 8121 775 550
nettetal@ avnet-embedded.eu
ITALY (PORTUGAL, SPAIN)
Avnet Embedded
Avnet EMG Italy SRL
Via Manzoni, 44
20095 Cusano Milanino
Phone: +39 02 660 92 1
Fax: +39 02 660 92 498
milano @ avnet-embedded.eu
Avnet Embedded
Avnet EMG France SA
14 avenue Carnot
F-91349 MASSY Cedex
Tel: +33 (0)1 64 47 29 29
Fax: +33 (0)1 64 47 99 99
paris @ avnet-embedded.eu
NETHERLANDS (BELGIUM, LUXEMBOURG)
Avnet Embedded
Avnet B.V.
Takkebijsters 2
4817 BL Breda
Phone: +31 76 5722400
Fax: +31 76 5722404
benelux @ avnet-embedded.eu
Avnet Embedded
Avnet EMG France SA
Les Peupliers II
35 avenue des Peupliers
35510 Cesson-Sévigné
Phone: + 33 2 99 77 37 02
Fax: + 33 2 99 77 37 01
rennes @ avnet-embedded.eu
SWEDEN (NORWAY)
Avnet Embedded
Avnet Nortec AB
Esplanaden 3 D
172 67 Sundbyberg
Phone: +46 8 564 725 50
Fax: +46 8 760 01 10
sweden @ avnet-embedded.eu
All trademarks and logos are the property of their
respective owners. This document provides a brief
overview only and is not intended to be complete or
binding offer. Product information, including information
related to a product‘s specifications, uses or conformance
with legal or other requirements, is obtained by Avnet
from its suppliers or other sources deemed reliable and
is provided by Avnet on an „As Is“ basis. Avnet makes
no representation as to the accuracy or completeness
of the product information and Avnet disclaims all
representations, warranties and liabilities under any
theory with respect to the product information, including
any implied warranties of merchantability, fitness for a
particular purpose, title and/or non-refringement. All
product information is subject to change without notice.
04/2011