High performance spectrophotometer accessories

advertisement
GE Healthcare
Life Sciences
High performance
spectrophotometer
accessories
High performance spectrophotometer accessories for Ultrospec™ 7000, 8000, and 9000
Film Holder
Designed to measure the absorbance or %
transmission of solid materials including thin flexible
sheet materials such as plastic, acrylic or gelatine.
Applications also include the quality control of
optical lenses plus measurement of metal films
and optical coatings
•Holds films from 1 mm to 10 mm thickness
•Holds films up to 160 mm wide and 70 mm high
•Fits to standard sample compartment
baseplate, can be changed in seconds
Ordering information
•Holder installed in sample position only
Product
Film holder for Ultrospec 7000/8000/9000
Test Tube Holder
Designed to hold test tubes from 10 mm to 24 mm
diameter and up to 160 mm tall in the Ultrospec 7000,
8000 and 9000 spectrophotometers.
This accessory replaces the standard
single cell holder. The installation is
easily performed by the operator with
only one thumb screw to remove at
the front of the cell compartment.
•10 to 24 mm tubes diameters
•Up to 160 mm tube height
•Fits to standard sample
compartment baseplate, can be changed in seconds
Ordering information
Product
Test Tube Holder for Ultrospec 7000/8000/9000
Code no.
80-7100-11
www.gelifesciences.com/spectros
Code no.
80-7100-13
High performance spectrophotometer accessories for Ultrospec 7000, 8000, and 9000
Thermostatted 5-Cell Changer
The water tubing is connected to an external
fluid circulator.
•Fully automatic operation
•Fully controlled by software, parameters stored
within application methods
•Fits to standard sample compartment
baseplate, can be changed in seconds
The 5-position thermostatted cell changer is
designed to speed up analysis by allowing users
to automatically measure samples that are at
a controlled temperature. With a cell changer
connected the software will allow the user to
perform parallel kinetics measurements on either
stand-alone local control or PC-controlled instruments.
•Fast operation
Ordering information
Product
Thermostatted Cell Changer for Ultrospec 7000/8000/9000
Code no.
80-7100-09
Automatic 8-Cell Changer
Designed to read up to 8 cells automatically on the
Ultrospec 7000/8000/9000 spectrophotometers,
this accessory is fully controlled from either the
built-in local control software or via the Windows™
PC Datrys software.
•Fully automatic operation
The cell changer replaces the standard single
cell holder; installation is easily performed by the
operator with only one thumb screw to remove at
the front of the cell compartment. The cell changer
is automatically identified by the spectrophotometer
and is ready to use immediately.
•Fast operation
•Fully controlled by software, parameters stored
within application methods
•Fits to standard sample compartment base plate,
can be changed in seconds
An automatic 5-Cell thermostatted version is also
available, for Ultrospec 7000, 8000, and 9000—see
above for details.
Ordering information
Product
Non Thermostatted 8-Cell Changer for
Ultrospec 7000/8000/9000
Code no.
80-7100-08
www.gelifesciences.com/spectros
1
High performance spectrophotometer accessories for Ultrospec 7000, 8000, and 9000
Variable Pathlength Cell Holder
The variable pathlength cell holder is designed to
hold 1 mm, 2 mm, 5 mm, 10 mm, 20 mm, 50 mm and
100 mm pathlength cells in the Ultrospec 7000, 8000
and 9000 spectrophotometers. To accommodate
different pathlengths the clips should be moved to
secure the cell at the required pathlength.
•Variable pathlength of 1 mm, 2 mm, 5 mm,
10 mm, 20 mm, 50 mm and 100 mm
•Only 1 thumb screw
•Supplied with spacers for short
pathlength cells
Ordering information
Product
Code no.
Variable Pathlength Cell Holder for Ultrospec 7000/8000/9000
80-7100-05
Water Thermostatted Single Cell Holder
The water thermostatted cell holder is designed to
work with water circulators to achieve constant
temperatures in the range of 5 to 80°C. The accessory
is connected so that the water flows into the bottom
of the cell holder and flows out through the top of
the cell holder.
•Only 1 thumb screw at front of sample compartment
•10 mm pathlength
Ordering information
Product
Water Thermostatted Single Cell Holder for
Ultrospec 7000/8000/9000
2
Code no.
80-7100-03
www.gelifesciences.com/spectros
High performance spectrophotometer accessories for Ultrospec 7000, 8000, and 9000
Automatic Sipper System
Aspiration system using a peristaltic pump head
designed to read automatically a sample from a
tube, beaker or flask.
The sample is sipped through the front aspiration
tube and then moved to the flow-through cell for
automatic reading. After measurement the sample
can be either be sent to waste or returned to the
sample tube, suitable for precious samples.
An air gap volume can be set between two samples
to avoid any cross contamination.
All sipping parameters can be programmed and
stored along with the user method and include:
sipped volume, air gap, settle time, auto read on/off
and waste or return modes.
The sipper is fully controlled from either the built‑in
local software or via the Windows PC DATRYS software.
•Automatic aspiration
•User defined air gap and sip volume
•Waste or return option
•Local or PC-controlled
•Ability to calibrate sipped volume
•Choice of tubing kits
Ordering information
Product
Code no.
Sipper for Ultrospec 7000/8000/9000
Requires Tubing kit (80-7100-37 or 80-7100-38) &
suitable flowcell
80-7100-36
Standard tubing kit for Ultrospec 7000/8000/9000 sipper
Includes 6 Marprene pump head tubes, PTFE tubing
and silicon connection tubing
80-7100-37
Acid Resistant Tubing kit for Ultrospec 7000/8000/9000 sipper
Includes 6 Viton pump head tubes, PTFE tubing and silicon
connection tubing
80-7100-38
80 µl Quartz Flowcell for sipper 10 mm pathlength
with screw connectors and tubing
80-7100-40
www.gelifesciences.com/spectros
3
High performance spectrophotometer accessories
Peltier Thermocirculator
The principal feature of this product is that a small
volume of water (150 ml) is heated and cooled using
Peltier elements, allowing a very wide temperature
range, from ambient temperature 20°C, up to 60°C,
as well as temperature accuracy (± 0.1°C).
The Peltier Thermocirculator is a stand-alone external
accessory, and as a result requires no electronic or
physical modifications to the cell-holders.
•Range 20°C to 60°C
•Temperature accuracy of ± 0.1°C
•User-friendly interface and digital display
•Display current and set temperatures
•Sealed unit
Technical specification
Controls
LCD Keypad/Display Unit
Programmable parameter
Temperature
Displayed values
Current thermostat temperature
Set temperature
Heating/cooling power
Temperature range
20°C to 60°C
Temperature accuracy
± 0.1°C from 20°C to 60°C
Temperature repeatability
Typically ± 0.1°C
Connectivity
USB as standard.
Dimensions (w × h × d) mm
170 × 280 × 430 mm
Weight
6 kg
Electrical data
115/120 V or 220/240 V
Frequency: 50/60 Hz
Power: 120 VA
4
Ordering information
Product
Peltier Thermocirculator (requires suitable thermostatted
cell holder or cell changer)
www.gelifesciences.com/spectros
Code no.
80-7100-50
Ordering information
Product
Code no.
Product
Code no.
NanoVue Plus Accessories
Ultrospec 9000
UV-Visible Spectrophotometer
29-0036-16
Pathlength calibration kit
28-9244-05
PC-controlled UV-Visible Spectrophotometer
29-0036-17
Replacement sample plate kit
28-9569-58
UV-Visible Spectrophotometer with printer accessory
29-0036-18
Spare printer paper 20 rolls
28-9182-26
UV-Visible Spectrophotometer with Bluetooth™ accessory
29-0036-19
Printer accessory
28-9182-27
Lower sample plate kit
28-9569-59
SD card accessory
28-9432-14
Bluetooth accessory
28-9182-25
UV-Visible Spectrophotometer with printer & Bluetooth accessory 29-0036-20
Ultrospec 8000
UV-Visible Spectrophotometer
29-0036-10
PC-controlled UV-Visible Spectrophotometer
29-0036-11
UV-Visible Spectrophotometer with printer accessory
29-0036-12
GeneQuant 1300 Classic
28-9182-13
UV-Visible Spectrophotometer with Bluetooth accessory
29-0036-13
GeneQuant 1300 with printer
28-9182-14
UV-Visible Spectrophotometer with printer & Bluetooth accessory 29-0036-14
GeneQuant 1300 with Bluetooth
28-9182-15
Ultrospec 7000
GeneQuant 1300
™
Bluetooth accessory
28-9182-25
UV-Visible Spectrophotometer
29-0036-05
Spare printer paper 20 rolls
28-9182-26
PC-controlled UV-Visible Spectrophotometer
29-0036-06
Printer accessory
28-9182-27
UV-Visible Spectrophotometer with printer accessory
29-0036-07
GeneQuant 100
UV-Visible Spectrophotometer with Bluetooth accessory
29-0036-08
UV-Visible Spectrophotometer with printer & Bluetooth accessory 29-0036-09
Ultrospec 2100 pro
Classic
80-2112-21
Ultrospec 2100 pro Accessories
GeneQuant 100 Classic
28-9182-04
GeneQuant 100 Classic with Printer
28-9182-05
Spare printer paper 20 rolls
28-9182-26
Printer accessory
28-9182-27
PVC Software for GeneQuant 100
28-9231-88
Spreadsheet interface software
(Requires serial interface cable – sold separately).
80-2110-73
Capillary cell holder
80-2120-19
RS232C Serial Interface Cable
80-2105-97
Spare capillaries for cell holder
80-2104-67
4-position cell changer (10 – 50 mm pathlength)
80-2106-01
6-position Peltier heated cell changer, 10 mm pathlength
(requires Temperature Control Unit, see 80-2105-49)
Classic
80-2106-04
8-position water heated cell changer, 10 mm pathlength
(requires circulation bath)
80-2109-70
Sipper, complete with UV quartz cell and all tubing
(requires single cell holder 80-2106-05 or 80-2106-13)
80-2112-15
Temperature Control Unit
80-2105-49
Lens Cleaning Tissue, 100 × 150 mm, 25 wallets of 25 sheets
2105-841
NanoVue Plus
™
NanoVue Plus with integrated printer (US & CA only)
Ultrospec 10 Cell Density Meter
28-9569-63
80-2116-30
Ultrospec 10 Cell Density Meter Accessories
S2000P Serial Printer (includes serial cable)
80-3000-94
Spare paper for S2000P printer
28-9582-73
Novaspec
Novaspec Plus
80-2117-50
Novaspec Plus with heated cell holder: includes Grafico PC
utility software, serial cable, dust cover.
80-2117-51
Novaspec III
80-2118-00
Novaspec accessories and other items
NanoVue Plus with integrated printer (Worldwide except US & CA) 28-9569-66
Test tube adapters (10, 12, 16 mm)
80-2117-47
NanoVue Plus, print via computer (US & CA only)
Chart recorder interface cable
80-3003-55
Lamp Assembly. Tungsten
80-2115-33
28-9569-62
NanoVue Plus, print via computer (Worldwide except US & CA) 28-9569-65F
NanoVue Plus with wireless connectivity (US & CA only)
28-9569-64
NanoVue Plus with wireless connectivity
(Worldwide except US & CA)
28-9569-67
NanoVue Plus with SD card option (US & CA only)
28-9569-61
NanoVue Plus with SD card option (Worldwide except US & CA) 28-9569-60
www.gelifesciences.com/spectros
For local office contact information, visit
www.gelifesciences.com/contact
www.gelifesciences.com/spectros
GE Healthcare UK Limited
Amersham Place
Little Chalfont
Buckinghamshire HP7 9NA, UK
GE, imagination at work, and GE monogram are trademarks of General Electric Company.
Cy, illustra, and NanoVue are trademarks of GE Healthcare companies.
Ultrospec and GeneQuant are trademarks of Biochrom Ltd. Microsoft, Windows, Excel, and
Vista are trademarks of Microsoft Corporation. Bluetooth is a trademark of Bluetooth
Special Interest Group (SIG).
© 2011 General Electric Company—All rights reserved.
First published Oct. 2011
All goods and services are sold subject to the terms and conditions of sale of the company
within GE Healthcare which supplies them. A copy of these terms and conditions is available
on request. Contact your local GE Healthcare representative for the most current information.
GE Healthcare Bio-Sciences AB, Björkgatan 30, 751 84 Uppsala, Sweden
GE Healthcare Europe, GmbH, Munzinger Strasse 5, D-79111 Freiburg, Germany
GE Healthcare Bio-Sciences Corp., 800 Centennial Avenue, P.O. Box 1327, Piscataway,
NJ 08855-1327, USA
GE Healthcare Japan Corporation, Sanken Bldg., 3-25-1, Hyakunincho, Shinjuku-ku,
Tokyo 169-0073 Japan
29-0043-70 AA 10/2011
Download