PP150-P012 V1.8 (15 mm)
Information herein is subject to change
Proxi-Point™ 150W
PRODUCT DATASHEET
Wireless Power Supply
Features
• Dual mode capability. Available as a stationary
point-to-point connector system, or as a wireless slip
ring system to deliver power across rotating joints
• Transfer power through any non metallic material
including liquids, solids and gases
• Corrosion and water resistant - immersion rating of IP67
• Max continuous power is 150 W, max peak power is 240
W (up to 1 hour)
• Independent over current protection for each output
• Provides ±5% output regulation @ 0-8 mm gap
• Plug and play system compatible with existing power
supplies
• Input reverse polarity protection
• Output reverse current protection. A battery on the
output will not discharge into the power receiver
electronics
Description
Benefits
•
•
•
•
•
•
•
•
•
•
•
Continuous IP68 protection
Enable contact free battery charging
Eliminate unreliable plugs and sockets
Solve continuity of delivery and maintenance pain
points
Simplify implementation/installation processes
Create unique competitive advantages in the design,
operation and convenience of products
Reduce high installation and ongoing maintenance
costs
Immune to dust, dirt and other contaminants
True zero-insertion force connection
No exposed terminals
Provides supply isolation - eliminating unwanted
ground loops
Typical Applications
•
•
•
•
•
•
•
•
•
•
•
Proxi-Point™ 150W
Automatically guided vehicles
Forklift sensors
Process automation equipment
Hydraulic control valves and actuators
Forestry and construction machinery
Robot end effectors
Medical equipment
SMED (single minute exchange of dies)
Quick change tooling
No-plug charging station
Blind mating connectors
The Proxi-Point™ is a standalone electrical device that
enables transfer of power across any non-metallic
material. The Proxi-Point™ can also be operated in slipring mode enabling transfer of power across an electrical
rotary joint often referred to as a slip ring, electric swivel,
rotary electrical interface or a collector.
The Proxi-Point™ 150W is a next generation solution
providing a reliable and maintenance-free
alternative to traditional cables, coil cords, connectors,
and slip-rings.
Input power is transferred inductively. A standard 24 VDC
power supply can be used to power the Proxi-Point™
150W (PP150W) power transmitter. Up to 10 A peak can
be drawn from the PP150W power receiver at 24 VDC. The
output voltage is held within a tight ±5% tolerance @ 0-8
mm gap.
The Proxi-Point™ 150W is available as a plug and play
modular system which can be used to upgrade power
supply in new or existing equipment.
© 2016 PowerbyProxi Limited. All rights reserved. Product specifications are subject to change.
Contains confidential information and intellectual property of PowerbyProxi; Patents Pending.
1
PP150-P012 V1.8 (15 mm)
Information herein is subject to change
Proxi-Point™ 150W
Electrical Specifications
Environmental Specifications
Tx Input Voltage Range
24 VDC ± 10 %
Operating Temperature
Rx Output Voltage
24 VDC ± 5 % (at 0-8 mm), see
Figure 1 for 8-15 mm
0 oC to 40 oC
32 oF to 104 oF
Storage Temperature
Input Current
< 10 A @ 24 V (150 W)
< 13 A @ 24 V (240 W)
-55 oC to +85 oC
-67 oF to +185 oF
IP Protection Class
67
Output Current
6.5 A continuous
10 A peak
Operating Shock
TBD
Vibration
TBD
Peak Output Power
240 W (10 A) for up to 1 hour
IPT Frequency
96 KHz ± 1 KHz
Drop Test
TBD
System Efficiency
83% (typical) at 150 W
Output Ripple
< 720 mVp-p ≤150 mA load
current
< 240 mVp-p >150 mA load
current
Protective features:
• Input and output reverse voltage protection
• Output short-circuit protection
• Output reverse current protection
Mechanical Specifications
Total Weight
5.0 kg
Cable Length
1.0 m standard (side entry)
1.5 m standard (center entry)
Transmission Distance
0 - 15 mm
Misalignment Tolerance
5 mm
Housing
Aluminium and acetal
Dimensions
In millimeters [inches] unless otherwise specified
Transmitter and receiver cable entry positions are configurable as either center-entry or side-entry or any combination.
© 2016 PowerbyProxi Limited. All rights reserved. Product specifications are subject to change.
Contains confidential information and intellectual property of PowerbyProxi; Patents Pending.
2
PP150-P012 V1.8 (15 mm)
Information herein is subject to change
Proxi-Point™ 150W
Figure 1: Typical Output Voltage over Z-distance
Enquiries:
Sales:
Web:
info@powerbyproxi.com
+1 (512) 827 3571
www.powerbyproxi.com
Texas:
12612 Capella Trail
Austin, TX 78732
Phone: +1 (512) 827 3571
Fax:
+1 (512) 582 8543
New Zealand:
Phone:
© 2016 PowerbyProxi Limited. All rights reserved. Product specifications are subject to change.
Contains confidential information and intellectual property of PowerbyProxi; Patents Pending.
5 Wilkins street,
Freemans Bay
Auckland, 1011
+64 (9) 914 8311
3