CN.D Series
Industrial Power for
Business-Critical Continuity™
DC Energy - Charger
CN.D chargers are designed to charge
12 V to 48 Vdc battery or maintain
larger battery used for Genset starter
or fire pumps Self.
Benefits
A robust charger batteries unit,
adapted to the difficult industrial environments,
supplemented effective protections increase
its reliability.
n Charger units for integration in cabinet
providing performances and data with
high quality level (regulation, reliability,
short circuit proof…).
n A clear indication two LED report mains
presence and indicate charging operation.
As an option three indicators and two relay
report alarm and a good accessibility give fast
maintenance.
n Small overall dimensions facilitate its
integration.
n Second voltage (Egalization mode) for
electrolytic cells batteries (Lead-acid and
NiCad).
n
They can also be integrated in box to provide power supplies with backup for
process control systems, or to LV/MV switchgears.
CN.D Series
Industrial Power for
Business-Critical Continuity™
DC Energy - Charger
Nominal
Nominal
voltage (V) current (A)
1000027
CN.D 12-12
12
12
1011861
CN.D 08-24
24
8
1000029
CN.D 10-24
24
10
1011719
CN.D 12-24
24
12
1000030
CN.D 15-24*
24
15
1000035
CN.D 05-48
48
5
* Input single-voltage : 230 V (on request: 400 V)
Code
Reference
Input power
(VA)
330
405
485
600
750
485
Protection
Weight
Input Output (Kg)
2
20
5.0
2
16
5.0
2
20
5.2
4
20
6.8
4
25
6.8
2
10
5.2
This publication is issued to provide outline information only and is not deemed to form any part of any offer and/or contract. The company has a policy of continuous product development and improvement, and we therefore reserve the right to vary
any information without prior notice.
Technical Specification
Dimensions
HxWxD
140x150x157
140x150x157
140x150x157
140x150x175
140x150x175
140x150x157
General data
Mains inputs voltage
230 - 400 VAC single phase -10% +15% - 50 Hz & -10% +25% - 60 Hz
Static regulation
± 1%
Short circuit current limitation
from 0.75 x In to In
Filtering
< 6% battery disconnected
Ambient operating temperature / Storage
-5° to +50 °C / -40° à +50°C
Relative humidity
< 95% with 20°C («all climates»)
LED signals
« Mains » and « Egalization mode » on
For futher details please refer to technical data sheet
Options
Reference Designation
4
Manual charge (equilizing) : jumper on 2 terminals
E
Manual charge (equilizing) with led signaling controlled by switch + adjusting potentiometer
mD
Alarm card, allowing to detect :
• Battery low voltage with 10 sec timer. LED + voltage free contact
• A real charger failure combinig a low dc volt alarm enslaving to mains availability and a high dc volt alarm.
LED + volt free contact
Other
Input voltage / output voltage / rating
Specific version - Parallel operation - Casing fitting
Standards
Compliance
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity™.
ECM n°2004/108/CE - NF EN 61000-6-2 / NF EN 61000-6-4
LV n°2006/95/CE - NF EN 60439-1
Transformers comply to NF EN 61558-2-6
n AC Power
n Connectivity
n DC Power
n Embedded Computing
Emerson Network Power IS SAS
30 avenue Montgolfier - BP90 - 69684 Chassieu Cedex France
T +33 (0) 4 72 47 63 77 - F +33 (0) 4 78 40 13 94
E aees@emerson.com / www.aees.fr
EmersonNetworkPower.com
n Embedded Power
n Industrial Power
n Infrastructure Management & Monitoring
n Outside Plant
n Power Switching & Controls
n Precision Cooling
n Racks & Integrated Cabinets
n Services
Emerson, Business-Critical Continuity and
Emerson Network Power are trademarks of
Emerson Electric Co. or one of its affiliated companies.
©2013 Emerson Electric Co.
CND_DSUK_Rev1_06/2013