PureFX® Project Name Spec Type Recessed Notes 2’x2’ 1 TT5 (40W) Order Guide Some combinations of product options may not be available. Consult factory for assistance with your specification. 9422 B140 – – – – Product Series & Size Version Configuration Lamping Housing Wiring Voltage Ballast PureFX 2’x2’ D1 D2 A1 A2 ST Standalone CR Continuous Row SMS Standalone Master/Satellite CMS Continuous Row Master/Satellite 1 TT5 (40W) S N C T 1 1 cct 5 1 cct w/ Battery Pack 7 1 cct Dimming 1 120V 2 277V 3 347V E Standard Ballast Standard T-Grid Slot T-Grid Air Return on Standard T-Grid Air Return on Slot T-Grid Standard (22ga.) New York (20ga.) Chicago Plenum Standard w/ Frame Restraint Consult website for complete list of standard wiring options See details on next page Upgrades & Accessories Consult website for ballast manufacturer information Cross Section Please indicate with check mark. Lamps Included Lamps Included & Installed Job Pack Flex Whip 4-3/8" 23-13/16" Can be mounted to wood frame or with hanger wire Drywall Kit Not available in continuous row Side View Wood Frame 24" Hanger Wire 4-3/8" Response Daylight For details visit www.ledalite.com/response 23-11/16" © 2010 Ledalite Phone: 604.888.6811 Fax: 800.665.5332 Web: www.ledalite.com Filename 9422xxxxB140.pdf Rev 2.5 PureFX® Additional Information Recessed 2’x2’ Mounting 1 TT5 (40W) Integrates with most common T-bar ceiling types. Photometry Option D1 works with 9/16” and 15/16” flat T-grid ceilings. It can also be used with slot T-grid ceilings, but it will not sit flush with the bottom of the T-bar. Report Summary Report # Filename Efficiency Spacing Criteria 9900426 9422D1B140.ies 79% D1 Standard T-Grid 1.3 @ 0˚ along 1.4 @ 90˚ across Meets RP-1-04 recommendations for VDT-Normal spaces Ceiling Types Candela Distribution Vertical Angle 0 5 15 25 35 45 55 65 75 85 90 0 948 940 904 840 739 584 376 187 64 8 0 180 Horizontal Angle 22.5 45 67.5 948 945 920 879 791 600 377 199 77 12 0 948 949 958 965 860 614 390 223 105 20 0 90 Zonal Lumens 948 948 955 956 996 1013 1044 1071 902 905 626 626 402 398 234 229 113 111 22 21 0 0 135 135 92 272 441 524 472 349 216 102 23 90 90 1100 cd Coefficients of Utilization (%) 80 Specifications 45 45 0 45 90 0 Avg. Luminance (cd/m2) Ceiling: Wall: 70 50 30 10 70 70 50 30 50 50 30 10 0 0 Vertical Angle 0 RCR 1 2 3 4 5 6 7 8 9 10 94 87 80 73 67 62 57 53 50 46 44 94 83 74 65 58 53 47 43 39 36 33 94 80 69 60 52 46 41 37 33 30 27 94 78 65 55 47 41 36 32 29 26 23 92 85 78 71 66 60 56 52 48 45 43 92 82 72 64 57 52 47 43 39 36 33 92 79 68 59 51 45 40 36 33 30 27 87 78 70 62 55 50 45 41 38 35 32 87 76 66 57 50 45 40 36 32 29 27 87 74 63 53 46 40 36 32 28 26 23 79 68 58 50 43 38 33 30 27 24 22 55 65 75 85 Based on a floor reflectance of 0.2 © 2010 Ledalite Integrated mounting tabs can be field-adjusted to various T-bar ceiling heights for fastening directly to the T-bar grid and/or tied-off to the building structure. Phone: 604.888.6811 0 Horizontal Angle 45 90 1913 1292 722 268 1985 1540 1184 670 2025 1582 1252 703 IES files for this and other photometric options can be downloaded online at www.ledalite.com Fax: 800.665.5332 Web: www.ledalite.com D2 Slot T-Grid Air Return 1" T-bar height 1-1/2" T-bar height 1-11/16" T-bar height Option D2 is designed to sit flush with slot T-grid ceilings and some tegular tile ceiling types. The air return version features slotted vents along the sides of the fixture. As a result, the installation method of the air return version is different to the standard version, and the fixture cannot be installed in continuous rows. Due to continuing product improvements, Ledalite reserves the right to change specifications without notice. Housing Die-formed, post-painted, 22 gauge cold-rolled steel (New York City version is 20 gauge). Wire entrances are positioned on the side of the housing to allow easy wiring access for the installer. Multiple wire entrances are available on top or side to allow continuous row mounting of fixtures. Optional frame restraint is available to provide additional support to the optical frame. Weight Maximum 23 lbs. Optical System Optical assembly consists of flat acrylic panels and extruded curved acrylic lens. A protected MesoOptics® film layer creates optimal light distribution and high efficiency. The optical frame ends are constructed from die-formed cold-rolled steel assembled together with extruded aluminum profiles in a sturdy frame. The frame is hinged to allow easy access to the inside of the fixture. Maintenance can be performed from below the ceiling without tools. No hardware is visible. Ballast Electronic. Supplied with pre-installed ballast disconnects as per national electric codes. Wiring Optional flex whips are supplied in 6' lengths for 1x4, 2x2 and 2x4 fixtures. Flex connectors are supplied in 9' lengths for standard master/satellite configurations. Air Return Air return option available in 2'x2' and 2'x4' sizes only. Side rails are finished in black. Approvals Certified to UL & CSA Standards. City of Chicago Approved CCEA (housing option C). Designed to comply with NYC code requirements (Housing Option N). Finish Housing and Frame: Post-painted, high quality powder coat. Available in white only. Mounting Fixture is compatible with most ceiling types. Integrated bend-out tabs are provided for different T-grid heights. Optional drywall kit is available for non-accessible ceilings. Use screws or hanger wire (supplied by others) to secure fixture. Filename 9422xxxxB140.pdf Rev 2.5