Fixture Type
APPROVAL
Lamp Type
Job Ref. / Location
SERIES
FF7200
7" Aperture Recessed Compact
PRODUCT DATA
FRAME IN MODULE – Rugged 20 gauge die formed steel with corrosion resistant (galvanel) finish. Optional remodel housing available.
Fluorescent Downlight 13, 18, 26 WattQuad
Horizontal Lamps
REMODEL OPTION – Available as remodel style, specify Prefix RM.
• Open reflectors are
not suitable for air
handling plenums
BAR HANGERS – Expandable from 14-1/4" to 26", vertically
mounted for strength with locking tabs for off-center mounting.
27" solid bar hangers optional.
ERTEK
INT
CM
C
US
LIS TED
Listed
JUNCTION BOX – with easy access covers, prewired with grounding pigtail, listed for through branch circuit wiring, 4 in/4 out, pryout
KO's (2) 1/2", (2) 3/4".
Listed For
Damp Locations
7-1/2"
SOCKET HOUSING – Die formed aluminum with ventilation slots
for efficient lamp performance. Attaches to trim, complete with
(2) positive latch four pin thermoplastic sockets. Four pin sockets
furnished with dimming ballasts and electronic ballasts. See below
for appropriate socket styles.
Also available in
Ballast information located on reverse.
Remodel Style (RM)
6-1/2"
7-3/4"
15-1/4"
Standard with
Low Iridescent Finish
(Width 14-1/4")
6-7/8" Rough Opening
Model Number:
TRIMS
Specification grade, Alzak® one piece, "Hydro-Spun" aluminum reflectors with 5/8" self flanging trim ring – painted buff white. Available
with optional polished flange. To order specify suffix # - PF. (See Options). Standard with low-iridescent reflector finish to eliminate "rainbow
effect" of compact fluorescent lamps. Lens trims are available for wet location applications. See Options.
Specular
Alzak®
White Enamel
Reflector
Specular Alzak®
Cross Blade Louver
Baffle
Eyelid Cutout
Wall Wash
Wall Wash
❋/C7 (clear) ❋/WC7 (white) ❋/CL7 (clear ❋/B7 (black ❋/W7 ❋/CWW7)
❋/G7 specular Alzak) baffle, clear Alzak) (white finish) (clear Alzak)
(champagne gold)
❋/GL7 (champagne
❋/BG7 (black ❋/GWW7
❋/BC7 (black) gold specular Alzak) baffle, gold Alzak) (gold Alzak)
❋/C7PEW (pewter)
❋/WL7 ❋/WB7 (white
❋/C7BZ (bronze) (matte white finish) baffle, clear Alzak)
❋/WBG7 (white baffle, gold Alzak)
Splay Fresnel
Glass
❋/F7-C (clear Alzak) ❋/F7-G (gold Alzak)
❋/F7 (white) (white Splay)
Drop Opal
Glass
❋/DO7 (white
Splay)
Splay Corning C73
Tempered Glass
Splay Pattern 12
Prismatic Acrylic
❋/P7-C (clear Alzak)
❋/P7-G (gold Alzak)
❋/P7
(white)
❋/C737-C (clear Alzak) ❋/C737-G (gold Alzak)
❋/C737 (white Splay)
Drop Opal Plastic Lens
For Wet Locations
❋/PDO7-WL
Radial Prismatic
Plastic Lens
For Wet Locations
❋/PR7-WL
❋Insert fixture type then options (refer to "How to Order" on the reverse side).
All products are manufactured in accordance with U.L. standards #1598. Suitable for use in damp locations. All Pathway® products meet or exceed requirements as established
by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
FL12.0
CLCAUL
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com
SERIES FF7200 COMPACT FLUORESCENT
TECHNICAL DATA
FIXTURE PERFORMANCE
Clear Specular Alzak® Reflector (C7)
CONE OF LIGHT Clear Champagne Gold Alzak Electronic Ballasts are supplied standard in a universal voltage input
and will operate within a range of 120 volt to 277 volt.
This universal voltage is designated as suffix – 4E.
These ballasts are high power factor, instant start and operate at
under 10% THD (Total Harmonic Distortion) within a frequency range
of 50 to 60 Hz (Hertz). All electronic ballasts require the use of 4 pin
compact fluorescent lamps.
SPACING CRITERIA
1.0 SMHR
•Footcandles to 50% of
maximum = Beam Dia.
Ballast technical information and operating characteristics may
be found by consulting the Technical Section of our catalog.
CATALOG #
FF7213/❋
FF7218/❋
FF7226/❋
LAMP TYPE
(2) F13DTT
(2) F18DTT
(2) F26DTT
WATTAGE / LAMP
FIXTURE LUMENS
(2 LAMPS)
OPTIONS
HOUSING
*4 PIN
Initial Footcandles @ NADIR
• Distance to Illuminated
Plane (30" above floor)
FC/0°
(2)(2)
(2)
Mounting 1318
26
Beam
Height WattWatt
WattDiameter
8.0' 16 22
28
8'
10.0'
8 12
18
10'
12.0'
6 7
10
13'
14.0'
3 5
7
15'
16.0'
2 3
5
17'
Dimming Ballasts require the use of 4 pin compact fluorescent
lamps. ADVANCE or LUTRON may be specified. Consult sales department for specific availability and ordering information.
SOCKET
STYLE
Reflector (G7) = (FC x .90)
SUFFIX #
Polished, Self Flanging Trim Ring .............................. #–PF
Emergency Power Pack: ........................................ # –FPLT
G24Q1G24Q2 G24Q3
Romex Clamp......................................................... #– RX
Gasketed Lens Trim - Wet Location........................... #– WL
1318 26
17202500 3600
(Illuminates 1 lamp for 90 min. @ 650 lumens)
27" Solid hanger bars (2/set).................................. #– 27BH
Cold Weather Ballast ( -20°F ).................................. #– CW
Optional Remodel Housing........................................ #RM–
PREFIX #
BALLASTS
Single
Circuit
Double
Circuit
120/277 V Electronic Ballast ........................ # – 4E .........# – 4ED
HOW TO ORDER
Optional
RM
–
Frame In
FF7 2 26
–
Ballast
4E
/
Reflector Trim
C7
–
Reflector Options
PF
Optional Remodel Housing
Horizontal Lamp, 7" Aperture
Double Lamp Operation
(Specify "1" for single lamp operation)
26 Watts
120/277 V Electronic Ballast
Clear Alzak, Standard with Low-Iridescent Finish
7" Aperture
Self Flanging Polished Trim Ring
FL12.0
CUMDUE
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com