Fixture Type
APPROVAL
Lamp Type
Job Ref. / Location
SERIES
FF7200S
7" Aperture Recessed Shallow Plenum
PRODUCT DATA
FRAME IN MODULE – Rugged 20 gauge die formed steel with
corrosion resistant (galvanel) finish. Suitable for a maximum ceiling
thickness of one inch.
Compact Fluorescent Downlight
13, 18, 26 Watt Horizontal Lamps
BAR HANGERS – Expandable from 14" to 26", vertically mounted
for strength with locking tabs for off-center mounting. 27" solid
bar hangers optional.
• Open reflectors are not suitable
for air handling plenums
JUNCTION BOX – with easy access covers, prewired with
grounding pigtail, listed for through branch circuit wiring, 4
in/4 out, pryout KO's (2) 1/2", (2) 3/4".
ELECTRICAL – 120 to 277 volt input 50 to 60 Hz high power
factor electronic ballasts are instant start, under 10% THD.
Consult Technical Section for additional ballast operating data.
Optional emergency ballast (-EM) operates one lamp for 90
minutes, faceplate with test switch and charger light. Integral
push to test switch available. EM option can only be used in accessible ceilings.
DIMMING BALLASTS – require the use of 4 pin compact fluorescent lamps. ADVANCE or LUTRON may be specified. Consult Sales
Department section for specific availability and ordering information.
4"
Ballast technical information and operating charac-
teristics may be found by consulting the Technical Section of our catalog.
6-1/2"
7-3/4"
18"
SOCKET HOUSING – Die formed aluminum with ventilation slots
for efficient lamp performance. Attaches to trim, complete with
(2) positive latch four pin thermoplastic sockets.
6-7/8" Rough Opening
Standard with Low-Iridescent finish. Width 14-1/2"
Model Number:
TRIMS
Specification grade, Alzak one piece, "Hydro-Spun" aluminum reflectors with 5/8" self flanging trim ring – painted buff white. Available with
optional clear flange on Specular Clear reflectors. To order specify suffix # - PF. (See Options). Low-Iridescent reflector finish is standard
to reduce "rainbow effect" of compact fluorescent lamps. Lens trims are supplied gasketed for wet location applications. See Options. See
separate sheet for optional reflector finishes.
®
Specular Alzak®Specular Alzak® Shallow Reflector
Cross Blade Louver
❋/SCL7 (clear specular Alzak)
❋/SWL7 (matte white finish)
❋/SC74 (clear)
Insert fixture type then options (refer to "How to Order" on the reverse side).
HOUSING
Radial Prismatic Polycarbonate Lens
Shower Trim – Wet label
Drop Opal White Finish – Wet label
#SPR760-WL
#SPD760-WL
(All plastic)
Splay Corning C73
Tempered Glass
Splay Fresnel Glass
Standard Fixture with Universal 120 - 277 Electronic Ballast
Catalog #
Lamp Type
Socket Style – 4 Pin
Wattage/Lamp
Fixture Lumens (2 Lamps)
FF7213S/❋
FF7218S/❋
FF7226S/❋
(2)
F13DTT/27K
(2)
F18DTT/27K
(2)
F26DTT/27K
G24Q1
G24Q2
G24Q3
13
18
26
1720
2500
3600
4 Pin Lamps required for all Electronic and Dimming Ballasts.
❋/SF7- C (clear Alzak) ❋/SF7 (white Splay)
❋/SC73C7 (clear Alzak)
❋/SC737 (white)
All products are manufactured in accordance with U.L. standards #1598. Suitable for use
in damp locations. All Pathway® products meet or exceed requirements as established
by the National Electrical Code. Specifications subject to change without notice. Alzak® is a
registered trademark of Alcoa.
ERTEK
INT
CM
C
US
LIS TED
Listed
Listed For
Damp Locations
FL16.0
CUCAUL
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com
SERIES FF7200S COMPACT FLUORESCENT
OPTIONS (add suffix)
SUFFIX #
Polished, Self Flanging Trim Ring ................................................ #– PF
27" Solid hanger bars (2/set).................................................... #– 27BH
Gasketed Lens Trim - Wet Location............................................. #– WL
Emergency Battery Pack with remotely located Test Switch............. #– EM†
Emergency Battery Pack with Integral Test Switch installed in reflector#–
EMITS†
Fused .................................................................................... #– F
BALLASTS
Single Circuit
120/277
V Electronic
Ballast
.............................................................#
– 4E
† EM option can
only be used
in accessible
ceilings
HOW TO ORDER
Frame In
FF7 2 26 S
–
Ballast
4E
/
Reflector Trim
SC74
–
Reflector Options
PF
Horizontal Lamp, 7" Aperture
Double Lamp Operation
(Specify "1" for single lamp operation)
26 Watts
Shallow Plenum
120 - 277 Universal Electronic Ballast
Clear Alzak, Shallow Plenum
7" Aperture, Shallow Plenum
Polished Clear, Self Flanging Trim Ring
APPROVAL:
FL16.0
CBCEUB
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com