Fixture Type
APPROVAL
Lamp Type
Job Ref. / Location
SERIES FF7200
PRODUCT DATA
7" Aperture Recessed Compact
Fluorescent Downlight 13, 18, 26 Watt
Quad Horizontal Lamps
FRAME IN MODULE – Rugged 20 gauge die formed steel with corrosion resistant (galvanel) finish. Optional remodel housing available.
REMODEL OPTION – Available as remodel style, specify Prefix RM.
BAR HANGERS – Expandable from 14-1/4" to 26", vertically
mounted for strength with locking tabs for off-center mounting.
27" solid bar hangers optional.
JUNCTION BOX – with easy access covers, prewired with grounding pigtail, listed for through branch circuit wiring, 4 in/4 out, pryout
KO's (2) 1/2", (2) 3/4".
Also available in
Remodel Style (RM)
ERTEK
INT
CM
C
US
LIS TED
Listed
Listed For
Damp Locations
7-1/2"
SOCKET HOUSING – Die formed aluminum with ventilation slots
for efficient lamp performance. Attaches to trim, complete with
(2) positive latch four pin thermoplastic sockets. Four pin sockets
furnished with dimming ballasts and electronic ballasts. See below
for appropriate socket styles.
6-1/2"
7-3/4"
Ballast information located on reverse.
15-1/4"
Standard with
Low Iridescent Finish
(Width 14-1/4")
6-7/8" Rough Opening
Model Number:
TRIMS
Specification grade, Alzak® one piece, "Hydro-Spun" aluminum reflectors with 5/8" self flanging trim ring – painted buff white. Available
with optional polished flange. To order specify suffix # - PF. (See Options). Standard with low-iridescent reflector finish to eliminate "rainbow
effect" of compact fluorescent lamps. Lens trims are available for wet location applications. See Options.
Specular
Alzak®
White Enamel
Reflector
❋/C7 (clear)
❋/G7
(champagne gold)
❋/BC7 (black)
❋/C7PEW (pewter)
❋/C7BZ (bronze)
❋/WC7 (white)
Splay Fresnel
Glass
Drop Opal
Glass
❋/F7-C
(clear Alzak)
❋/F7-G
(gold Alzak)
❋/F7
(white) (white Splay)
❋/DO7 (white
Splay)
Specular Alzak®
Cross Blade Louver
❋/CL7 (clear
specular Alzak)
❋/GL7 (champagne
gold specular Alzak)
❋/WL7
(matte white finish)
Splay Corning C73
Tempered Glass
❋/C737-C
(clear Alzak)
❋/C737-G
(gold Alzak)
❋/C737
(white Splay)
Baffle
Eyelid
Wall Wash
❋/B7 (black
baffle, clear Alzak)
❋/BG7 (black
baffle, gold Alzak)
❋/WB7 (white
baffle, clear Alzak)
❋/WBG7 (white
baffle, gold Alzak)
❋/W7
(white finish)
Splay Pattern 12
Prismatic Acrylic
Drop Opal
Plastic Lens
❋/P7-C
(clear Alzak)
❋/P7-G
(gold Alzak)
❋/P7
(white)
For Wet Locations
❋/PDO7-WL
Cutout
Wall Wash
❋/CWW7)
(clear Alzak)
❋/GWW7
(gold Alzak)
Radial Prismatic
Plastic Lens
For Wet Locations
❋/PR7-WL
❋Insert fixture type then options (refer to "How to Order" on the reverse side).
Horizontally lamped fixtures with open reflectors may not be suitable for use in air handling plenums. For more information, consult the pressroom section of our website.
All products are manufactured in accordance with U.L. standards #1598. Suitable for use in damp locations. All Pathway® products meet or exceed requirements as established
by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
FL12.0
CUUUUB
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com
SERIES FF7200 COMPACT FLUORESCENT
TECHNICAL DATA
FIXTURE PERFORMANCE
Electronic Ballasts are supplied standard in a universal voltage input
and will operate within a range of 120 volt to 277 volt.
Clear Specular Alzak® Reflector (C7)
Clear Champagne Gold Alzak
Reflector (G7) = (FC x .90)
CONE OF LIGHT
This universal voltage is designated as suffix – 4E.
These ballasts are high power factor, instant start and operate at
under10%THD(TotalHarmonicDistortion)withinafrequencyrange
of50to60Hz(Hertz).Allelectronicballastsrequiretheuseof4pin
compact fluorescent lamps.
Dimming Ballasts require the use of 4 pin compact fluorescent
lamps. ADVANCE or LUTRON may be specified. Consult sales department for specific availability and ordering information.
Ballast technical information and operating characteristics may
be found by consulting the Technical Section of our catalog.
SPACING CRITERIA
1.0 SMHR
•Footcandlesto50%of
maximum = Beam Dia.
Initial Footcandles @ NADIR
•DistancetoIlluminated
Plane (30" above floor)
FC/0°
(2) (2)
13 18
Watt Watt
16 22
8
12
6
7
3
5
2
3
Mounting
Height
8.0'
10.0'
12.0'
14.0'
16.0'
(2)
26
Watt
28
18
10
7
5
Beam
Diameter
8'
10'
13'
15'
17'
OPTIONS
HOUSING
SUFFIX #
CATALOG #
LAMP TYPE
SOCKET
STYLE
*4 PIN
FF7213/❋
FF7218/❋
FF7226/❋
(2) F13DTT
(2) F18DTT
(2) F26DTT
G24Q1
G24Q2
G24Q3
WATTAGE / LAMP
13
18
26
FIXTURE LUMENS
(2 LAMPS)
1720
2500
3600
Polished, Self Flanging Trim Ring ............................. # – PF
Emergency Power Pack:
(Illuminates 1 lamp for 90 min. @ 650 lumens)
for Electronic & Dimming Ballasts (4 Pin Lamps) ...... # – FPLT
27" Solid hanger bars (2/set) ................................. # – 27BH
Romex Clamp ........................................................ # – RX
Gasketed Lens Trim - Wet Location .......................... # – WL
Cold Weather Ballast ( -20°F ) ................................. # – CW
PREFIX #
Optional Remodel Housing ....................................... # RM –
Single
Circuit
BALLASTS
Double
Circuit
120/277 V Electronic Ballast ....................... # – 4E .........# – 4ED
HOW TO ORDER
Optional
RM
–
Frame In
FF7 2 26
–
Ballast
4E
/
Reflector Trim
C
7
–
Reflector Options
PF
Optional Remodel Housing
Horizontal Lamp, 7" Aperture
Double Lamp Operation
(Specify "1" for single lamp operation)
26 Watts
120/277 V Electronic Ballast
Clear Alzak, Standard with Low-Iridescent Finish
7" Aperture
Self Flanging Polished Trim Ring
FL12.0
CUCAUB
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com