ALSZ Series
www.rcicustom.com
Sized Aluminum Panels
ALSZ308-1
FEATURES
•
•
•
•
•
Sized panels made from 1/8”aluminum
Sized to fit standard NEMA® type boxes
Finishes include black or clear anodize,
white, ivory and black powder coat
With or without beveled edges
Engraved and filled custom lettering
•
•
•
•
•
Available with or without components
With or without mounting holes
Configure and label using our on-line
PanelBuilder software
Custom colors and sizes always available
Made in USA
The RCI ALSZ Panel Series is designed for convenient installation with standard electrical style back
boxes. Made from 1/8” (11 gauge) aluminum, these rugged panels come standard in two anodize or
three powder coat finishes to meet the architectural needs of most any project. Custom engraved
lettering can be easily specified and filled with contrasting colors. Panel edging may be requested in
1/16”, double 45 degree beveled, or square configuration to match other panels or architectural demands.
Custom sizes and finishes are available by contacting the factory.
Panels may be designed using PanelBuilder, RCI Custom Products unique on-line design software and
pricing tool, or by submitting any type drawing directly to the factory.
A & E SPECIFICATIONS
The AV Panels shall be RCI Custom Products Model ALSZ ___. Panels shall be 1/8” aluminum (11 gauge),
vertically grained, and finished in _____________ (black or clear anodize or white, ivory, or black textured powder
coat). Standard dimensions shall be (see chart)). The edges of the panels shall be (specify square or double beveled
.0635 at 45 degrees). Engraving shall be 1/8” Helvetica with contrasting engravers enamel supplied where
applicable. Connectors shall be fixed to the plate with screws and KEP nuts. Mounting hole specification TBD.
801 North East Street • Frederick, MD 21701 • 301-620-9130 • 800-546-4724 • FAX 301-620-9103
www.rcicustom.com
ALSZ Series
Sized Aluminum Panels
ALSZ308-1
FINISH SELECTION: Replace suffix “xx” with finish “BK” (black anodized), “CL” (clear anodized),
“PW”(powder coat white), “PI” (powder coat ivory), or “PBKTX” (powder coat black texture)
P/N
ALSZ4X4xx
ALSZ5X5xx
ALSZ6X6xx
ALSZ8X8xx
ALSZ10X10xx
ALSZ12X12xx
ALSZ13X13xx
ALSZ16X16xx
ALSZ18X18xx
ALSZ24X24xx
Description
4”x 4” pre-sized aluminum plate
5”x 5” pre-sized aluminum plate
6”x 6” pre-sized aluminum plate
8”x 8” pre-sized aluminum plate
10” x 10” pre-sized aluminum plate
12” x 12” pre-sized aluminum plate
13” x 13” pre-sized aluminum plate
16” x 16” pre-sized aluminum plate
18” x 18” pre-sized aluminum plate
24” x 24” pre-sized aluminum plate
Note: Contact factory for custom sizes and finishes. Prices include engraving and components
(purchased separately) installed on panel, and mounting screws.
SPECIFICATIONS:
Material:
Finish:
Edge Treatment:
Components:
Engraving:
1/8” (11 gauge) vertically grained aluminum
Choice of anodized black or clear, powder coat white, ivory, or black texture
Square, or beveled 1/16” on two 45 degree angles
As required
As specified
801 North East Street • Frederick, MD 21701 • 301-620-9130 • 800-546-4724 • FAX 301-620-9103