SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE, 1.6 GPF
FOR FLOOR-MOUNT, EXPOSED BACK, SPUD BOWLS
MODEL NUMBER:
❑ 6065.261.007 DC Powered, 1.6 gpf
CR-P2 lithium battery included
REAR ACCESS
Fully Mechanical Manual Override
Vandal-Resistant Chrome Plated Metal Wall Plate
❑ 6067.261.007 Plug-In AC Powered, 1.6 gpf
SAME AS ABOVE
Class 2 UL certified plug-in AC power
supply included
Universal input voltage: 100 - 240 VAC, 50/60 Hz.
❑ 6068.261.007 Multi-AC Powered, 1.6 gpf
SAME AS ABOVE
10' Extension cable and Y-connector included
One transformer can power up to 15 faucets and/
or flush valves in a daisy chain configuration
POWER SUPPLY NOT INCLUDED
GENERAL DESCRIPTION:
Concealed, Sensor Operated Selectronic® Toilet Flush
Valve (Rear Access) for floor mount bowls with 1-1/2"
exposed back spud.
PRODUCT FEATURES:
• Self-Cleaning Piston with integral wiper spring
significantly reduces clogging and maintenance
• Selectronic® Proximity System with universal
sensor provides hygienic, "hands free" operation
• State-of-the-Art Electronics prevent ghost flushing
• Dezincification Resistant semi-red brass alloy
• Fully Mechanical Manual Override Button
can flush the valve without power
• Fail-Safe: Valve automatically closes upon loss of
power or water pressure and does not need to be reset
• Adjustable Sanitary Flush cleans the fixture &
maintains the trap seal.
• Chemical resistant EPDM Seals for extended life
• Adjustable tailpiece for rough-in flexibility
• Can be installed left or right handed
• All exposed parts are chrome-plated
OPERATING PRESSURE:
25 psi (flowing) - 80 psi (static)
FLOW REQUIREMENT:
25 gpm (94.6 L/min.)
160mm
(6-1/4")
160mm
(6-1/4")
INCLUDES:
• 1" I.P.S. angle stop with back-flow protection and
hand wheel
• 1" Sweat solder adapter
• 1-1/2" Vacuum breaker with spud coupling and flange
RECOMMENDED SPECIFICATION:
Electronic, sensor activated toilet flush valve for floor-mount bowls (with 1-1/2" exposed back spud) shall feature self-cleaning piston valve with
integral wiper spring in refill orifice to prevent clogging. Shall feature a fully mechanical manual override that can flush the valve without power.
Shall also feature a semi-red brass valve body and vandal-resistant chrome-plated metal wall plate that includes the sensor and manual override
button. Includes angle stop with back-flow protection and hand wheel. Sweat solder adapter and vacuum breaker also included. Must be installed
and maintained from the rear. 1.6 gpf / 6.0 Lpf. Flush Valve shall be American Standard Model # 606_261.007.
© 2016 AS America Inc.
L27
Revised (5/16)
SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE, 1.6 GPF
FOR FLOOR-MOUNT, EXPOSED BACK, SPUD BOWLS
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
Roughing-in Dimensions
BACK SPUD TOILET
25mm (1") MAX.
FINISHED WALL
DETECTION ZONE
400mm-800mm
(15-3/4" TO 31-1/2")
160mm
(6-1/4")
160mm
(6-1/4")
OVERRIDE
BUTTON
SENSOR
15˚
127X127mm
(5"X5" CUTOUT
FOR BOX)
200mm
(7-7/8")
406mm
(16")
-C-L-
* -C-L152mm
(6") MIN.
SUPPLY
DN 25mm
(1") I.P.S.
108mm-134mm
(4-1/4" TO 5-1/4")
51mm (2")
+ WALL THICKNESS
73 TO 111mm
(2-7/8" TO 4-3/8")
289 TO 403mm
(11-3/8") MIN. TO
(15-7/8") MAX.
432mm
(17") MAX.
TOP OF
FIXTURE
19mm
(3/4")
51mm
(2")
*FOR LOCATION OF INLET
SUPPLY ON BACK INLET
FIXTURES,REFER TO FIXTURE
BEING INSTALLED
FOR CORRECT HEIGHT FROM
FINISHED FLOOR
71mm
(2-3/4") DIA.
*Note: The Critical Line (-C-L-) on Vacuum
Breaker must typically be 6 " (152mm) min.
above fixture. Consult Codes for details.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES
© 2016 AS America Inc.
L28
Revised (5/16)