SELECTRONIC™ FloWise® EXPOSED 0.21 GPF (0.95 L/f) URINAL

advertisement
SELECTRONIC™ FloWise® EXPOSED
0.21 GPF (0.95 L/f) URINAL FLUSH VALVE
HARD-WIRED AC POWERED, SENSOR OPERATED
MODEL NUMBER:
❑ 6062 025.002 Hard-Wired AC Powered:
Includes UL-approved Hard-Wired AC transformer
(electrical box by others). 11-1/2" (292mm) rough-in
❑ 6061 025.002 Multi-AC Powered:
Includes 10' (3048mm) extension cable and Y
connector. One transformer (sold separately) can
operate up to 15 faucets and/or flush valves. 11-1/2"
(292mm) rough-in
OPERATING PRESSURE:
Overall Range: 20/138 kpa-125 psi/862 kpa**
Recommended: 20 psi/138 kpa (flowing)-80 psi/552
kpa (static)
GENERAL DESCRIPTION:
Exposed, Hardwired AC Powered, Sensor Operated
Selectronic™ Urinal Flush Valve for 3/4" top spud
urinals.
Inlet includes 3/4" I.P.S. angle stop with back-flow
protection, vandal-resistant cap, sweat solder kit,
cover tube and wall flange.
Outlet includes 3/4" vacuum breaker, spud coupling
and flange.
FLOW REQUIREMENT:
8.3 gpm (37.9 L/min.)
** Water pressure over 80 psi/552 kpa is not
recommended for most plumbing fixtures.
ACCESSORIES:
• Cast wall flange (3/4")
PRODUCT FEATURES:
• Exclusive Pressure Compensation feature eliminates the
need for the installer to adjust the stop valves, saving time
and money and ensuring water savings
• Electronic flush valve with Selectronic™ proximity system
for “Hands Free” operation
• Includes UL approved hardwired AC transformer
• Input Voltage: 100 - 250 VAC, 50 / 60 Hz. Output Voltage:
6 VDC.
• Self-Cleaning Piston operation with integral wiper spring
prevents clogging and reduces maintenance
• Piston operation delivers superior flush accuracy and
repeatability
• Adjustable tailpiece
• Chemical resistant EPDM seals are unaffected by
chloramines and ammonia
• Valve remains closed and does not need to be reset after
loss of power or water pressure
• Stadium Feature: Valve automatically switches to water
conservation mode during periods of heavy usage
• Fully Mechanical Manual Override Button can flush toilet
during a power outage
• Vandal-resistant metal cover plate (for 2-gang electric
box supplied by others) with no visible fasteners
• Sensor & electronic controls are fully enclosed and water
resistant
• Range can be adjusted manually or by remote control
• Sanitary Flush - Valve automatically flushes after 24 hours
of non-use to clean fixture & maintain trap seal
• No external volume adjustment
• 5 second Arming Delay prevents unintentional flushing
• 3-second Flush Delay
• Can be installed left or right-handed
86mm
(3-3/8")
160mm
(6-1/4")
57mm (2-1/4") 76mm (3")
115mm-134mm
(4-1/2" TO 5-1/4")
COVER &
ELECTRICAL
BOX
292mm
(11-1/2")
CRITICAL
LEVEL
FOR 3/4" TOP
SPUD FIXTURES
-C-L-
SUPPLY
DN 20mm
(3/4" I.P.S)
152mm
(6" MIN.)
FINISHED
WALL
FINISHED FLOOR
BARRIER FREE B651.12
RECOMMENDED SPECIFICATION:
Electronic proximity infrared sensor activated toilet flush valve shall feature self-cleaning piston valve. Includes a UL listed hardwired power
supply that provides 6 VDC power to run system. Includes a fully mechanical manual over-ride that can provide a complete flush without power.
Includes cast brass valve body and metal cover with chrome finish and vandal resistant stop cap. Angle stop with back-flow protection and
vacuum breaker included. 0.21 gpf (0.95 L/f). Flush valve shall be American Standard Model # 606_025.002
© 2013 AS America Inc.
L245
08/13
SELECTRONIC™ FloWise® EXPOSED
0.21 GPF (0.95 L/f) URINAL FLUSH VALVE
HARD-WIRED AC POWERED, SENSOR OPERATED
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
Roughing-in Dimensions
180 ˚
160mm
(6-1/4)
72mm
(2-7/8)
MANUAL
OVERRIDE
BUTTON
2-GANG ELECTRICAL
BOX BY OTHERS
160mm
(6-1/4)
DETECTION ZONE
400mm-800mm
(15-3/4 TO 31-1/2)
FINISHED WALL
15˚
116mm
(4-5/8)
*CRITICAL
LEVEL
293mm
(11-1/2)
-C-L152mm
(6 MIN.)
51mm (2") HOLE
FOR CONDUIT
45 ˚
305mm
(12 MAX.)
86mm
(3-3/8)
SUPPLY
DN 20mm
(3/4 I.P.S.)
-C-L-
409mm
(16-1/8)
115mm-134mm
(4-1/2 TO 5-1/4)
FOR 3/4" TOP
SPUD FIXTURES
57mm (2-1/4) 76mm (3)
TOP OF
FIXTURE
Right or Left Hand Installation
*Note: The Critical Line (-C-L-) on Vacuum Breaker
must typically be 6 " min. (152mm) above fixture.
Consult Codes for details.
© 2013 AS America Inc.
L246
08/13
Download