SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE, 1.28 GPF
WITH WALL BOX FOR WALL-HUNG, BACK SPUD BOWLS
MODEL NUMBER:
❑ 6065.362.007 DC Powered, 1.6 gpf
CR-P2 lithium battery included
FRONT ACCESS
Fully Mechanical Manual Override
Vandal-Resistant Stainless Steel Wall Box
❑ 6067.362.007 Plug-In AC Powered, 1.6 gpf
SAME AS ABOVE
Class 2 UL certified plug-in AC power
supply included
Universal input voltage: 100 - 240 VAC, 50/60 Hz
❑ 6068.362.007 Multi-AC Powered, 1.6 gpf
SAME AS ABOVE
10' Extension cable and Y-connector included
One transformer can power up to 15 faucets and/
or flush valves in a daisy chain configuration
POWER SUPPLY NOT INCLUDED
GENERAL DESCRIPTION:
Concealed, Sensor Operated Selectronic® Toilet Flush
Valve with Wall Box (Front Access) for wall-hung bowls
with 1-1/2" back spud.
PRODUCT FEATURES:
• Self-Cleaning Piston with integral wiper spring
significantly reduces clogging and maintenance
• Selectronic® Proximity System with universal
sensor provides hygienic, "hands free" operation
• State-of-the-Art Electronics prevent ghost flushing
• Dezincification Resistant semi-red brass alloy
• Fully Mechanical Manual Override Button
can flush the valve without power
• Fail-Safe: Valve automatically closes upon loss of
power or water pressure and does not need to be reset
• Adjustable Sanitary Flush cleans the fixture &
maintains the trap seal.
• Chemical resistant EPDM Seals for extended life
• Adjustable tailpiece for rough-in flexibility
• Can be installed left or right handed
• All exposed parts are chrome-plated
OPERATING PRESSURE:
25 psi (flowing) - 80 psi (static)
FLOW REQUIREMENT:
25 gpm (94.6 L/min.)
403mm
")
(15-7/8
INCLUDES:
• 1" I.P.S. angle stop with back-flow protection and
hand wheel
• 1" Sweat solder adapter
• 1-1/2" Vacuum breaker with spud coupling and flange
279mm
(11")
RECOMMENDED SPECIFICATION:
Electronic, sensor activated toilet flush valve for wall-hung bowls (with 1-1/2" back spud) shall feature self-cleaning piston valve with integral wiper
spring in refill orifice to prevent clogging. Shall feature a fully mechanical manual override that can flush the valve without power. Shall also feature
a semi-red brass valve body and vandal-resistant stainless steel wall box that includes the sensor and manual override button. Includes angle stop
with back-flow protection and hand wheel. Sweat solder adapter and vacuum breaker also included. Must be installed and maintained from the
front. 1.6 gpf / 6.0 Lpf. Flush Valve shall be American Standard Model # 606_362.007.
© 2016 AS America Inc.
L13
Revised (5/16)
SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE, 1.28 GPF
WITH WALL BOX FOR WALL-HUNG, BACK SPUD BOWLS
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
Roughing-in Dimensions
CAUTION: Use only American Standard
supplied cable sets. Using non-AS
supplied cables, or cutting, splicing or
modifying any components will void the
warranty.
BACK SPUD BOWLS
25mm (1) MAX.
WALL THICKNESS
404mm
(15-7/8)
FINISHED WALL
389mm x 265mm
(15-5/16 X 10-3/8)
ROUGH OPENING FOR BOX
15˚
SENSOR
DETECTION ZONE
400mm-800mm
(Factory Setting: 400mm)
OVERRIDE
BUTTON
280mm
(11)
FOR LOCATION OF INLET SUPPLY ON BACK INLET
FIXTURES AND CORRECT HEIGHT FROM FINISHED FLOOR,
REFER TO FIXTURE INSTRUCTION SHEET.
SUPPLY
(1) NPT
-C-L-
-C-L-
108mm-134mm
(4-1/4 TO 5-1/4)
70mm
(2-3/4) DIA.
*-C-L152mm
(6) MIN.
176mm MAX.
(6-15/16) MAX.
51mm
(2)
TOP OF
FIXTURE
128mm MAX.
(5) MAX.
400mm MAX.
(15-3/4) MAX.
450mm MAX.
(17-3/4) MAX.
CONCEALED BACK
SPUD TOILET
*-C-L152mm MIN.
(6) MIN.
240mm MAX.
(9-1/2) MAX.
TOP OF
FIXTURE
TOP OF
FIXTURE
51mm
(2)
*Note: The Critical Line (-C-L-) on Vacuum
Breaker must typically be 6 " (152mm) min.
above fixture. Consult Codes for details.
© 2016 AS America Inc.
EXPOSED BACK
SPUD TOILET
TOP SPUD
TOILET
51mm
(2)
FINISHED
FLOOR
L14
Revised (5/16)