COOPER LIGHTING - LUMARK
®
DESCRIPTION
Lumark's cutoff Z-Pack is a cutoff classified wall luminaire. Combining
compact, aerodynamic styling with higher wattage performance, it is ideal
for areas where spill light and glare control must be managed effectively.
U.L. Listed for wet locations.
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
A ... Housing
Die-cast aluminum housing
finished in a standard bronze
polyester powder coat finish.
C ... Lamp
Mogul-base lamp included and
available in 150W High Pressure
Sodium or 175W Metal Halide.
B ... Socket
5Kv mogul-base socket.
D ... Door
Special one-piece door design
provides low-glare cutoff lighting.
Silicone gasketing seals out dirt
and contaminants.
E ... Lens
Patterned tempered glass lens
minimizes direct lamp imaging.
Lens assembly is hinged on the
side for easy relamping and
maintenance.
F ... Mounting
Mounts to J-box or can be surface
mounted through tapped
openings.
Z-PAK CUTOFF
150 - 175W
High Pressure Sodium
Metal Halide
A
CUTOFF WALL MOUNT
LUMINAIRE
B
C
D
E
DIMENSIONS
9 1/4"
[235mm]
14 1/4" [362 mm]
ORDERING INFORMATION
Catalog
Lamp
Number
Type
High Pressure Sodium
HPFZ15C
ED23.5
Metal Halide
MHFZ17C
ED28
Lamp
Wattage
Ballast
Type
Voltage
8 5/8" [219mm]
Color
150
Reactor/NPF
120V
Bronze
175
CWA
Mult-Tap
Bronze
NOTE: Add “W” to the end of catalog number for white finish.
E N E RG Y D A T A
Reactor Ballast Input Watts
150W HPS NPF (175 Watts)
Accessories (order separately)
FZ/CO=Cutoff Door Replacement (Bronze)
FZ/FC/CO =Full Cutoff Visor for Cutoff (Bronze)
FZ/VS/CO =Vandal Shield for Cutoff (Bronze)
CWA Ballast Input Watts
175W MH HPF (210 Watts)
NOTE: Add “WHT” to the end of accessory for white finish (Example: FZ/CO-WHT).
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Shipping Data
Approximate Net. Weight
18lbs.(8.18kgs)
ADH041141
05/03/2007 3:07:33 PM