COOPER LIGHTING - LUMARK
®
DESCRIPTION
The Lumark Z-Pak provides a durable and efficient exterior light source for
any application requiring maximum performance and minimum
maintenance. The rugged, die-cast aluminum housing, stainless steel
hardware and sealed and gasketed optics compartment combine to make
the Z-Pak virtually impenetrable to contaminants. U.L. listed and labeled for
wet locations. CSA certified.
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
A ... Housing
Die-cast aluminum housing
finished in a durable bronze
polyester powder coat.
C ... Lamp
Mogul-base lamp included and
available in 150W High Pressure
Sodium or 175W Metal Halide.
B ... Socket
5Kv mogul-base socket.
D ... Door
One-piece die-cast door assembly
is hinged on the side for easy
relamping and maintenance. A
silicone gasket seals out dirt and
contaminants.
E ... Lens
Impact-resistant borosilicate glass
refractor.
F ... Mounting
Mounts to J-box or can be surface
mounted through tapped
openings.
A
Z-PAK
150 - 175W
High Pressure Sodium
Metal Halide
B
C
WALL MOUNT
LUMINAIRE
D
E
DIMENSIONS
9 1/4"
[235mm]
14 1/4" [362 mm]
7 3/4" [197mm]
ORDERING INFORMATION
Catalog
Lamp
Number
Type
High Pressure Sodium
HPFZ15
ED23.5
Metal Halide
MHFZ17
ED28
Lamp
Wattage
Ballast
Type
Voltage
Color
150
Reactor/NPF
120V
Bronze
175
CWA
Mult-Tap
Bronze
NOTE: Add “W” to the end of catalog number for white finish.
E N E RG Y D A T A
Accessories (order separately)
FZ/WG=Wire Guard
FZ/GS=Glass Door Replacement (Bronze)
FZ/FC/GS=Full Cutoff Visor for Glass (Bronze)
FZ/VS/GS=Vandal Shield for Glass (Bronze)
Reactor Ballast Input Watts
150W HPS NPF (175 Watts)
CWA Ballast Input Watts
175W MH HPF (210 Watts)
NOTE: Add “WHT” to the end of accessory for white finish (Example: FZ/WG-WHT).
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Shipping Data
Approximate Net. Weight
18lbs.(8.18kgs)
ADH041140-NO_CFL
05/08/2008 4:09:57 PM