EATON Camarillo Facility Approved Suppliers
advertisement
EATON Camarillo Facility Approved Suppliers 750 West Venura Blvd. Camarillo, CA 93010 For all NADCAP approved Processes, see the complete Process listing at eAuditnet or contact Eaton Camarillo QA Dept. for exact Process approval. 3H Manufacturing SAP ID#: 47045 LMFBM Supplier: No 1318 Newlin Dr Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Richmond Approved (Limited) 805-484-0543 TX 77406 281-342-1478 Ashley (sales) ashley@3hmanufacturing.com Contacts: Vendor Note Manufacture subsea electrical products. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Basic supplier requirements No A & A Enterprises SAP ID#: 36492 LMFBM Supplier: No 12421 Charloma Approved for Use: Yes Status: LMDenver Supplier: No CA Contacts: No Vendor Phone Tustin Approved No 92680 714-730-7726 WP Haines, General Mgr./Alice Haines, QA Mgr. Vendor Note Calibration and certification Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No MIL-STD-45662A No No No No No No No No No ISO 10012-1/17025 No No No MIL-Q-9858A No No No CALIBRATION SYSTEMS REQUIREMENTS EATON Camarillo Basic Supplier Quality Requirements MISCELLANEOUS ITEMS/SERVICES PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. QUALITY SYSTEM REQUIREMENTS Friday, January 10, 2014 Page 1 of 146 A & B Die Casting (Formerly Benda Tool) SAP ID#: 14415 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 900 Alfred Nobel Drive Hercules Approved CA 94547 510-741-3170 Ted Groom, QA Manager/Bob Drake, President. Contacts: Vendor Note Mfr. Of custom aluminum and zinc die castings. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit DIE CASTING ASTM B-85-92A No No No No No No ISO 10012-1/17025 No No No ISO-9001:2000 No No No EATON Camarillo Basic Supplier Quality Requirements PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. A & S Mold and Die Corp. SAP ID#: 2009 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 9705 Eton Avenue Vendor Phone Chatsworth Approved CA 91311 818-341-5393 Arno Adlhoch, President/Richard Herbert, Q.M. Contacts: Vendor Note Mfr. Injection molding tools, custom plastic injection molded products/Contract mfg. Of injection molded products and assemblies. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements Yes No No No No No No No No PLASTIC MOLDED OR EXTR. GOODS QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 A. E. Petsche Company, Inc. SAP ID#: 37037 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 2112 W. Division St. Vendor Phone Arlington Approved TX Contacts: 76012 817-461-9473 Glenn Davidson, CEO, Dale Gant, QA Manager Vendor Note Ditributor of fabricated wire. ISO 9001:2000 and AS9100 Rev. B Process Friday, January 10, 2014 Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Page 2 of 146 EATON Camarillo Basic Supplier Quality Requirements No No No AS9100 No No No ISO-9001:2000 No No No Model for Aerospace Quality Assurance Systems QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. A. L. Johnson SAP ID#: 36934 LMFBM Supplier: 4671 Calle Carga No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Camarillo Approved CA 93012 805-389-4631 Rick Klein Gen.Mgr. / Ricardo Garcia QA Mgr. Contacts: Vendor Note Precision castings and machining. Aluminum and Zinc castings with machining capabilities Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No No No No No No No No No No No No No HEAT TREAT ALUMINUM MIL-H-6088 FORGED/WROUGHT INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A NON-FERROUS METALS Quality System ISO9001:2000 RUBBER/PLASTER MOLD CASTINGS A. T. Wall SAP ID#: 37026 LMFBM Supplier: 55 Service Avenue Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone Warwick RI Contacts: 02886 401-739-0740 Jeff Stevens, QA Mgr. Vendor Note Specialty ferrous and non-ferrous tubing and metal stampings.TUBE BENDING/FORMING/MTL SPNNG Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit No Yes No No Yes No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 TUBE BENDING/FORMING/MTL SPNNG Friday, January 10, 2014 Page 3 of 146 No AAA Plating & Inspection, Inc. SAP ID#: 36393 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: Yes 424 Dixon Street No Vendor Phone Compton Approved Yes CA Contacts: 90222 323-979-8930 Jerry Wahlin, President Maurice Lew, QC Manager Gary Ragan Vendor Note Metal finishing including ion vapor deposition of aluminium, vacuum cadmium and non-destructive testing for the aerospace industry excluding design and servicing. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR No No Yes MIL-A-8625 MIL-A-8625 MIL-A-8625 TYPE III - HARD TYPE II-SULF (DY/UDY) (1) TYPE I-CHRMIC(DY/UDY) Yes Yes Yes No No No Yes Yes Yes QQ-P-416 QQ-P-416 TYPE I, II, III TYPE I,II Yes Yes No No Yes Yes Yes No Yes No No Yes MIL-I-45208A No No Yes MIL-C-83488 No No Yes No No Yes AS9100 Yes No Yes AC7114/2 Yes No Yes AC7114 Yes No Yes AC7114/1 Yes No Yes Yes No Yes No No Yes ANODIZING - ALUMINUM CADMIUM PLATING CHEMICAL PROCESSING AC7108 EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS ION VAPOR DEPOSITED ALUMINUM LUBRICANT, SOLID FILM, HEAT CURED, CORROSION I MIL-L-46010 TYPE I, II Model for Aerospace Quality Assurance Systems NON DESTRUCTIVE TESTIN MAGNETIC PARTICLE Non Destructive Testing NON-DESTRUCTIVE TESTING PENETRANT PASSIVATION QQ-P-35 TYPE II PASSIVATION/CLEANING MIL-S-5002 Friday, January 10, 2014 Page 4 of 146 SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Able Aerospace Adhesives (formerly ABL Aero) SAP ID#: 36426 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No 25032 Anza Drive Yes Vendor Phone Valencia Approved No CA 91355 661 257-2500 Lata Wadhwani, Office Mgr. Contacts: Vendor Note Sales, Distribution of composite materials, adhesives, coatings, lubricants, chemicals, dispensing supplies and equipment, paint soldering materials, tapes, mold release, thermal material, cleaning products and safety equipment. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Abrasive Finishing Company SAP ID#: 36603 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 14920 SO. MAIN Vendor Phone Gardena Approved CA 90248 213 323-7175 Mike Garcia, Q.C. Mgr. Contacts: Vendor Note Boeing approved for shot peening. Added 11/11/08 per Boeing ASL for process of P/N 1200-106-001 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Shot Peening of Metal Parts MIL-S-13165 TYP I, II No No No No No No Shot peening, Peen Forming, Glass Bead peening AC7117 Accumetric, LLC SAP ID#: 6822 LMFBM Supplier: 350 Ring Road Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone Elizabethtown KY Contacts: 42701 270-769-3385 Cordelia Ball QA Mgr Vendor Note Manufacture adhesives. Manufacturing and package silicone sealants, acrylics, firestops, silicone oils, and emulsions. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements Friday, January 10, 2014 Page 5 of 146 No Yes No No Yes No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Adept Fasteners SAP ID#: 47918 LMFBM Supplier: No Vendor Phone 28709 W. Industry Ave. Valencia Approved for Use: Yes Status: LMDenver Supplier: No Approved CA 91355 661-257-6600 Dale Barry (QM) Georgia Reinert (Account Manager) Mark Gon Contacts: Vendor Note Aerospace Hardware Distribution mwatts@adeptfasteners.com website: adeptfastneners.com Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit AS 9100 No No No ISO9001:2008 No No No Quality System Advanced Machining Techniques SAP ID#: 36536 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 16205 Vineyard Blvd Vendor Phone Morgan Hill Approved CA Contacts: 95037 408-778-4500 Frank Outra, President/Janelle Sicklesteel Quality Assurance/M Vendor Note Machining and sheet metal. Approved to use GMP Plating for passivation AMS-QQ-P-35 and Byington Steel Treating for Heat Treat. AMS-H-6875 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit iso 13485:2003 No No No MIL-STD-45662A No No No No No No MIL-I-45208A No No No AS9100 No No No ISO-9001:2000 No No No CALIBRATION SYSTEMS REQUIREMENTS EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS Model for Aerospace Quality Assurance Systems QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Friday, January 10, 2014 Page 6 of 146 MIL-STD-105 Advanced Technology Company SAP ID#: 36558 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No 2858 E. Walnut Street CA Contacts: No Vendor Phone Pasadena Approved Yes No 91107 626-449-2696 Robert DeSilvestri, Owner & GM Tom Huntzinger, QA Manager Vendor Note Electron beam welding. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No 999-056 No Yes No MIL-W-46132 No Yes No No Yes No MIL-W-46132 No Yes No MIL-I-45208A No Yes No No Yes No 999-086 No Yes No AC7110/3 Yes Yes No AC7110/5 Yes Yes No AC7110/6 Yes Yes No AC7110 Yes Yes No AS7003 Yes Yes No ISO-9001:2000 No Yes No MIL-STD-105 No Yes No FSN WLD (ALL) (EBW) FSN WLD ALM,MAG,TT&ALM-BRYLM (EBW) FSN WLDG STEEL & SUPER ALLOYS 999-056 EBW FSN WLDG STEEL & SUPER ALLOYS (EBW) INSPECTION SYSTEM REQUIREMENTS LASER CUTTING/MARKING/DRILLING LASER WELDING NADCAP - Electron Beam Welding NADCAP - Fusion Welding NADCAP - Laser Welding NADCAP - Welding/Brazing NADCAP SAE Aerospace Standard QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Friday, January 10, 2014 Page 7 of 146 Aero Electric Connector, Inc. SAP ID#: 41985 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 548 Amapola Avenue Vendor Phone Torrance Approved CA 90501 310-618-3737 John Schneff, President/George Adams, Quality Dir. Contacts: Vendor Note Design, Mfr., Marketing and Dist. Of electronic connectors to AS9100 requirements for military and aerospace applications under the following brands: Aero Electric Connectors/J-Techn and EMP Connectors. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No AS9100 No No No MIL-STD-790 No No No ISO-9001:2000 No No No FASTENERS PROCESSING Model for Aerospace Quality Assurance Systems PRODUCT ASSURANCE PROGRAM QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Aero-Dyne Supply Inc. SAP ID#: 42788 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 474 WHITNEY STREET SAN LEANDRO Approved CA 94577 510-562-0657 Contacts: Vendor Note Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM No Aiconics Inc. SAP ID#: 36636 LMFBM Supplier: 12150 Paine Place Approved for Use: Yes Status: LMDenver Supplier: No CA Contacts: No Vendor Phone Poway Approved Yes No 92064 858-513-2115 Richard Ball, General Manager, Tom Roberson, QA Manager Vendor Note Sealing plugs, insertion removal tools and contacts. Off the shelf , connector related products, example tools, seal plugs, etc. Process Friday, January 10, 2014 Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Page 8 of 146 CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No No Yes No MIL-I-45208A No Yes No MIL-Q-9858A No Yes No ANSI/ASQC Z1.4-1993 MIL-STD-105 No No Yes Yes No No CRIMPING INS./REMOVAL TOOLS EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS QUALITY SYSTEM REQUIREMENTS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Air Electro, Inc. SAP ID#: 36647 LMFBM Supplier: 9452 De Soto Avenue Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone Chatsworth CA 91311 818-407-5400 Steven Strull President Contacts: Vendor Note Electrical connector and contact mfr and distributor. ISO 9001:2000 & AS9100:2004 Rev. B, ELECTRONIC ASSEMBLY Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No AS9100 No Yes No ISO-9002 No Yes No ELECTRONIC ASSEMBLY Model for Aerospace Quality Assurance Systems QUALITY SYSTEMS FOR PRODUCTION Alert Plating Co. SAP ID#: A15690 LMFBM Supplier: No Vendor Phone 9939 Glenoaks BoulevaSun Valley Approved for Use: Yes Status: LMDenver Supplier: No Approved CA Contacts: 91352 818-771-9304 Mussadig Hussain, Quality Mgr. Vendor Note Plating, Metal Finishing Process Spec. AS7003 Friday, January 10, 2014 NAPCAP LMFBM LM_Denver Type/Class/Limit Yes No Page 9 of 146 No NADCAP - AQS - Inspection and Test Quality System AC7004 Yes No No AC7108 Yes No No NADCAP - Chemical Processing All Seals Inc. SAP ID#: 36736 LMFBM Supplier: 20762 LINEAR AVE Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone LAKE FOREST CA 92630 714-556-4931 Jerry Barnett, President/ Russ Ayers-QC Manager Contacts: Vendor Note Rubber seals, gaskets, o-rings, quad-rings,adhesives, rotary shaft seals. QUEST SUPPLIER 8/06 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No MIL-I-45208A No Yes No MIL-Q-9858A No Yes No No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS QUALITY SYSTEM REQUIREMENTS RUBBER EXT,CALENDERING&COMP RUBBER MOLDED GOODS Alliance Express SAP ID#: 36780 LMFBM Supplier: Vendor Phone 10024 Romandel, Ave. Santa Fe Sprin Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes CA 90670 562-946-3024 Contacts: Vendor Note Division of Alliance Plastics. Same company. Injection molded plastic caps, plugs, and other protection components. Our products do not contain restricted, toxic, or hazardous substances. Process Spec. NAPCAP No Friday, January 10, 2014 LMFBM LM_Denver Type/Class/Limit Yes Page 10 of 146 No Alliance Finishing & Mfg. SAP ID#: 64712 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1721 Ives Ave. Vendor Phone Oxnard Approved CA 93033 805 385-3330 Contacts: Vendor Note NADCAP Plating Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Chemical Processing NADCAP AS7003 Yes No No AC7004 Yes No No NADCAP - AQS - Inspection and Test Quality System Alliance Plastics SAP ID#: 6842 LMFBM Supplier: 3123 Station Road Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Erie Approved PA Yes 16510 800-832-8677 Tony Herbert, President Randall Dinger, Quality Manager Rhon Contacts: Vendor Note Injection molded plastic caps, plugs, and other protection components. Our products do not contain restricted, toxic, or hazardous substances. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit DUST CAPS No Yes No No Yes No ISO 14001:2004 No Yes No QS-9000 No Yes No EATON Camarillo Basic Supplier Quality Requirements ENVIRONMENTAL MANAGEMENT SYSTEMS QUALITY SYSTEM REQUIREMENTS (AUTOMOTIVE IND Allied Wire & Cable SAP ID#: 48242 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 101 Kestrel Drive Vendor Phone Collegeville Approved PA Contacts: 19426 800-828-9473 Mike Reardon, mreardon@awcwire.com Vendor Note Distributor Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Friday, January 10, 2014 No No Page 11 of 146 No American Durafilm Co., Inc. SAP ID#: 38137 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 55 Boynton Rd. Vendor Phone Holliston Approved MA Yes 01746-6770 508-429-8000 Jay Hendrick, President; Allen Patras, Q.C. Mgr. Contacts: Vendor Note Distributor/Fabricator of teflon, kapton & peek films. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A American Gage SAP ID#: AMG LMFBM Supplier: 870 North Batavia St No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Orange Approved Ca 92868 714-997-0291 Contacts: Vendor Note IAS CL-111 Calibration Laboratory Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No No No No No No IAS CL-111 Calibration Laboratory American Intl. Engineering & Mfg, Inc. SAP ID#: 41541 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 860 Arroyo Ave Vendor Phone San Fernando Approved CA Contacts: 91340 818-365-8000 Ward H. White, Owner/Tom, Quality Control Mgr. Vendor Note Aluminum castings and sand cast molding. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MISCELLANEOUS ITEMS/SERVICES Friday, January 10, 2014 Page 12 of 146 No Amet, Inc. SAP ID#: 36912 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Approved No Vendor Phone 2310 Michigan Avenue Santa Monica CA Yes No 90404 310-828-8484 Karl-Heinz Hirzel, President Contacts: Vendor Note Precision Machined Parts. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No No Yes Yes No No No Yes No No Yes No MACHINING CNC TURNING NC TURNING SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 TOOL MAKING JIG & FIXT. BLDG. AMK Welding 283 Sullivan Ave SAP ID#: C31012A Approved for Use: Yes Status: LMFBM Supplier: No LMDenver Supplier: No Vendor Phone South Windsor Approved CT 06074-0663 860-289-5634 Used by Continental Machine Tool Co.,Inc. Contacts: Vendor Note Welding Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 No Amphenol Corp.( previously Amphenol/Bendix Cor 40-60 Delaware Avenue Sidney SAP ID#: 36935 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Approved No Vendor Phone NY Contacts: No 13838 607-563-5011 Gary Anderson, General Manager David Karklin, Quality Directo Vendor Note Electrical Connectors. Erick Lopez 520-285-5147 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ANODIZING - ALUMINUM MIL-A-8625 Friday, January 10, 2014 TYPE III - HARD No No Page 13 of 146 No MIL-A-8625 TYPE II-SULF (DY/UDY) No No No No No No No No No CONN.PARTS(HOOD,B/SHELLSETC) COPPER PLATING MIL-C-14550 HEAT TREAT ALLOY STEEL MIL-H-6875 CRS IND. SEL. No No No MIL-H-6088 FORGED/WROUGHT No No No MIL-I-45208A No No No AS9100 No No No HEAT TREAT ALUMINUM INSPECTION SYSTEM REQUIREMENTS Model for Aerospace Quality Assurance Systems NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED No No No QQ-P-35 TYPE II No No No QQ-S-365 SILVER No No No ISO9001:2008 ISO9001:2000 No No No No No No ANSI/ASQC Z1.4-1993 No No No No No No PASSIVATION PRECIOUS METAL PLATING Quality System SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. TIN PLATING MIL-P-81728 Anixter Pentacon, Inc. SAP ID#: 36979 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No TIN / LEAD Vendor Phone 21123 Nordhoff Street Chatsworth Approved Yes CA Contacts: 91311 818-727-7800 Ron Basque Director of QA, Cyrus Bral QA Manager, Melissa Vendor Note Procurement of fasteners and electronic hardware for domestic and international distribution activities and the provision for value added hardware modification. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No AS9100 No Yes No ISO9001:2000 No Yes No Model for Aerospace Quality Assurance Systems Quality System Friday, January 10, 2014 Page 14 of 146 Aplastek SAP ID#: 520 Crane St. Unit D 36990 LMFBM Supplier: Approved for Use: Status: Yes LMDenver Supplier: No No Vendor Phone Lake Elsinore Approved CA 92530 951-674-5511 Jerry Roberts, Owner Contacts: Vendor Note Plastic Machined Parts. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No MIL-I-45208A No No No MIL-STD-105 No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Applied Industrial Tech SAP ID#: 37001 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 5107 Walker Street Vendor Phone Ventura Approved CA 93003 805-644-8941 Bob Werner - Service Center Manager Contacts: Vendor Note Bearings, drive products & systems, fasteners, rubber products, paints, springs adhesives, etc. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Associated Spring Barnes Group, Inc. SAP ID#: 42571 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 434 W. Edgerton Ave Vendor Phone Milwaukee Approved WI Contacts: 53207 414-482-1600 Paul Bodine, QA Mgr. Vendor Note Springs Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality Management System ISO/TC 16949:2002 Friday, January 10, 2014 No No Page 15 of 146 No Quality System ISO9001:2008 Associated Spring Corp. SAP ID#: 4968 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No No Vendor Phone 6180 Valley View AvenuBuena Park Approved No CA 90620 800-872-7732 David Baughman, Div. Mgr./Paula Bodine, Quality Mgr. Contacts: Vendor Note Stampings, springs & precision wireforms. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Atlas Bolt & Supply SAP ID#: 48521 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No No Vendor Phone 10835 Kalama River Av Fountain valley Approved No CA 92708 714-965-5300 William Weber, sales@atlasbolt.net Contacts: Vendor Note Fastener Distributor Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo BASIC SUPPLIER QUALITY REQUIRE No Aurora Casting & Engineering SAP ID#: 37040 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 1790 Lemonwood Dr. Approved CA Contacts: No Vendor Phone Santa Paula Yes No 93060 805-933-2761 John Penrose, President/ David Connelly, QA Manager. Vendor Note Steel, Aluminum & Copper Investment Casing & Machining, nadcap Heat Treat & Weld Process Spec. NAPCAP Nadcap AS9100:2009 AS7003 LMFBM LM_Denver Type/Class/Limit CRS IND. SEL. Yes No Yes Yes No No Yes Yes No Yes Yes No Heat Treat AS7003 HEAT TREAT ALUMINUM Friday, January 10, 2014 Page 16 of 146 AMS 2770 MIL-H-6088 No No Yes Yes No No ASTM B-618-94 No Yes No ISO9001:2000 ISO9001:2008 No No Yes Yes No No AS7003 No Yes No FORGED/WROUGHT INVESTMENT CASTING (WAX) Quality System Welding Automatic Components Inc. SAP ID#: 37043 LMFBM Supplier: Vendor Phone 3000 Worthen Avenue Los Angeles Approved (Limited) Approved for Use: Yes Status: LMDenver Supplier: No CA Yes 90039 323-664-1994 Timothy Clark, Corp. Secretary & Gen. Mgr. Contacts: Vendor Note Limited QMS system. Only to be used for legacy. (per Quality Manager) Mfr machine parts. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo BASIC SUPPLIER QUALITY REQUIRE No Yes No ANSI/NCSL Z540-1 No Yes No MIL-I-45208A No Yes No No Yes No CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. INSPECTION SYSTEM REQUIREMENTS MACHINING CONVENTIONAL SCREW MACHININ Autosplice Versatile (Frmly: Versatile Eng.) SAP ID#: 37000 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Yes 7551 Rosecrans Ave Vendor Phone Paramount Approved CA Contacts: 90723 310-933-3630 Adolf Weiss, Operations Manager Raul Gutierrez, QA Manager Vendor Note High Speed Precision Stamping *Note: The 10121 Barnes Canyon Rd, San Diego CA address is the global headquarters. The survey we have on file (see survey in file for details) covers all California locations. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes FOUR SLIDE Friday, January 10, 2014 Page 17 of 146 No No Yes No No Yes No No Yes No No Yes No PROGRESSIVE DIE QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 WIRE FORMING Avibank Manufacturing, Inc. SAP ID#: 42329 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 11500 Sherman Way Vendor Phone North Hollywoo Approved CA 91609-1909 818-392-2100 Mike Hall Gen.Mgr. / Peter Wang QA Mgr. Contacts: Vendor Note Mfr. Fasteners. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No No No No No No No No No No ELECTRONIC ASSEMBLY EMI AND RFI SHIELDING FASTENERS PROCESSING MFG &/OR ASSY. CONNECTORS Model for Aerospace Quality Assurance Systems AS9100 Bal Seal Engineering Co., Inc. SAP ID#: 37051 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 19650 Pauling Approved Yes Vendor Phone Foothill Ranch CA Contacts: 92610 949-460-2155 Rob Sjostedt President/CEO, Jesse Flores VP of Quality Assur Vendor Note Canted coil energized spring fluid seals; Springs Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes No MIL-STD-45662A No Yes No CALIBRATION SYSTEMS REQUIREMENTS EATON Camarillo Basic Supplier Quality Requirements Friday, January 10, 2014 Page 18 of 146 No Yes No MIL-I-45208A No Yes No ISO TS 169491/7/2013200 No Yes No ISO-9001:2000 No Yes No ANSI/ASQC Z1.9-1993 No Yes No INSPECTION SYSTEM REQUIREMENTS Quality System QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. SMPLG PROC. & TBLS BY VAR. FOR % NON-CONF. Bal-Tec SAP ID#: 37053 LMFBM Supplier: Vendor Phone 1550 E. Slauson Avenu Los Angeles No Approved for Use: Yes Status: LMDenver Supplier: No Approved CA 90011 800-322-5832 Patricia Johnson, QA Manager Contacts: Vendor Note Precision ball manufacturing. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Barry Avenue Plating SAP ID#: 37054 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: Yes 2210 Barry Ave No Vendor Phone Los Angeles Approved No CA 90064 310-478-0078 Contacts: Vendor Note General plating services. Process Spec. MIL-PRF-23377 MIL-L-81329 MIL-P-23377 MIL-P-53022 MIL-P-7962 MIL-F-18264 MIL-L-46147 TT-P-28 MIL-P-53030 AMS 2505 MIL-F-7179 MIL-C-22750 Friday, January 10, 2014 NAPCAP LMFBM LM_Denver Type/Class/Limit Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No No No No Page 19 of 146 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes MIL-C-53039 MIL-C-46168 DOD-P-15328 MIL-F-14072 MIL-C-8514 MIL-L-23398 Yes Yes Yes Yes Yes Yes No No No No No No Yes Yes Yes Yes Yes Yes AMS-A-8625 Yes No Yes MIL-C-83286 Yes No Yes No No Yes MIL-L-8937 Yes No Yes ASTM-E-1444 No No Yes AC7004 AC7004 AC7004 Yes Yes Yes No No No Yes Yes Yes AC7114 Yes No Yes AC7114/2 Yes No Yes AC7114/1 Yes No Yes ISO 10012-1/17025 No No Yes ASTM-E1417 No No Yes Anodizing Coating, Urethane, Aliphatic Isocyanate, for Aerospace App EATON Camarillo Basic Supplier Quality Requirements Lubricant, Solid, Film, Heat Cured, Corrosion Inhibiting Magnetic Particle Inspection NADCAP - AQS - Inspection and Test Quality System NADCAP NonDestructive Testing NADCAP NonDestructive Testing - Magnetic Particle NADCAP NonDestructive Testing - Penetrant PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. Standard Practice for Liquid Penetrant Examination Bisco Industries SAP ID#: 36391 LMFBM Supplier: No Vendor Phone 1500 North Lakeview A Anaheim Approved for Use: Yes Status: LMDenver Supplier: No Approved CA Contacts: 92807 714-693-2901 Tom Dunhill (Dir. Of Warehousing), Glen Celley (President) Vendor Note Distributor (only) of fasteners and hardware, electronic components & circuit board hardware. Special processes are out sourced to sub contracted suppliers. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 20 of 146 No Quality System ISO9001:2008 BJB Enterprises SAP ID#: 6225 LMFBM Supplier: No No 14791 Franklin Ave. Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone Tustin Approved No CA 92780 714-734-8450 Doug Van Brunt (QM) Deanna Lalande (vice president) Contacts: Vendor Note polyurethanes, epoxies, silicones & related services Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Bodycote Thermal Processing - Rancho Domingu SAP ID#: 36396 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No 515 West Apra Street CA Contacts: No Vendor Phone Compton Approved Yes No 90220 310-604-8000 Jose Catano, Division Manager, Dale Quimby, Sr. Quality Mana Vendor Note Vacuum and hydrogen furnace brazing, high temperature coating and heat treating of refractory metals titanium alloys, steels, stainless steels, magnetic irons and copper alloys. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit HEAT TREAT CU & CU-ALLOYS MIL-H-7199 COPPER-BERYLLIUM No Yes No No Yes No No Yes No AS9100 No Yes No AC7102 No Yes No AS7003 No Yes No ISO9001:2008 No Yes No HEAT TREAT TITANIUM MIL-H-81200 HEAT TREAT, STEEL MIL-H-6875 Rev. A Model for Aerospace Quality Assurance Systems NADCAP - STANDARD FOR DISTRIBUTORS (HEAT TRE Nadcap Heat treating Quality System Friday, January 10, 2014 Page 21 of 146 Boker's, Inc. SAP ID#: 17293 LMFBM Supplier: 3104 Snelling Ave. No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Minneapolis Approved MN 55406 612-729-9365 Amy Kersey, President; Steve Eberlein, Q.A Mgr. Contacts: Vendor Note Washer manufacturers. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Bondline Electronic Adhesives, Inc. SAP ID#: 36402 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 756 N. Pastoria Ave Approved Yes Vendor Phone Sunnyvale CA Contacts: 94085 408-830-9200 Neal Olson, President/Ed Sato, Director of Mfg, & QA/Fred Osa Vendor Note Premixed frozen epoxy. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit ADHESIVE No Yes No No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Brady Worldwide, Inc. SAP ID#: 56652 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 6555 West Good Hope Milwaukee Approved Yes Wisc 53223 800-537-8791 Contacts: Vendor Note THT.60X3.50B4371AC (I.D. Labels) Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Friday, January 10, 2014 Yes Page 22 of 146 No Bralco Metals SAP ID#: 36406 LMFBM Supplier: 15090 Northam St. Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone La Mirada CA 90638 800-628-1864 Mike Hubbart, Div. Mgr Contacts: Vendor Note Metal distributor and slitting, leveling, shearing, precision sawing of aluminum, stainless steel, copper brass and bronze. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No AS9100 No Yes No ISO-9001:2000 No Yes No Quality System QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. BRANTNER & ASSOCIATES, INC. SAP ID#: 48532 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 1700 GILLESPIE WAY EL CAJON Approved CA 92020 619-562-7070 Alan Lang ALANG@seaconworldwide.com Contacts: Vendor Note Manufacture electrical and fiber optic underwater connectors Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Braxton Manufacturing Co., Inc. SAP ID#: 6696 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No Approved CT Contacts: No Vendor Phone 858 Echo Lake Road P Watertown Yes No 06795 860-274-6781 Joe Triano President / Darryl White Dir. Of Quality Vendor Note Metal Stampings-Deep Draw for Medical, Electronics, Automotive and Other Industries. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No QQ-P-35 No Yes No ISO-9001:2000 No Yes No Passivation Treatments for Corrosion Resistant Steel QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Friday, January 10, 2014 Page 23 of 146 Standard Specification for Chemical Passivation ASTM-A-967 Brooktronics Engineering Corporation SAP ID#: 36408 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No No Vendor Phone 28231 Avenue Crocker Valencia Approved Yes CA 91355 661-294-1195 Chris Helwig, President, QA Mgr. Contacts: Vendor Note Brush gold & nickel plate. NADCAP AC7004 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No AC7004 Yes No No MIL-STD-865 No No No NADCAP - AQS - Inspection and Test Quality System SELECTIVE/BRUSH PLATING Brothers Swiss, Inc. SAP ID#: 36409 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 39450 Third Street East Palmdale Approved CA Contacts: 93550 661 947-7705 QA Manager, Jim Cirillo Vendor Note Machine parts. Precision Machining Small Parts. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No No No No No No No ISO-9001:2000 No No No MIL-Q-9858A No No No ANSI/ASQC Z1.4-1993 MIL-STD-105 No No No No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING SWISS SCREW MACHINE QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. QUALITY SYSTEM REQUIREMENTS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Friday, January 10, 2014 Page 24 of 146 Burbank Steel Treating, Inc. SAP ID#: 36412 LMFBM Supplier: Approved for Use: No Status: Yes LMDenver Supplier: Yes 415 So. Varney St. Vendor Phone Burbank Approved CA Contacts: 91602 818-842-0975 Mildred N. Bennett (CEO), Oscar Escobar (Quality Control Assi Vendor Note Steel heat treating, nitriding, annealling, carburizing, hardening. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Nitriding AMS 2759/6 No No Yes AMS 2759/7 No No Yes No No Yes No No Yes No No Yes No No Yes MIL-H-6875 No No Yes AMS-H-7199 No No Yes ISO-9001:2000 No No Yes AMS 2759/3 AMS 2759/3 No Yes No No Yes Yes AMS 2759/5 No No Yes AMS 2759/4 No No Yes AMS 2759/1 AMS 2759/2 No No No No Yes Yes Carbuizing EATON Camarillo Basic Supplier Quality Requirements HEAT TREAT ALLOY STEEL MIL-H-6875 CRS HEAT TREAT BERYLLIUM MIL-H-81200 HEAT TREAT CU & CU-ALLOYS MIL-H-7199 COPPER-BERYLLIUM HEAT TREAT, STEEL HEAT TREATMENT OF WROUGHT COPPER-BERYLLIU QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Stainless and PH Stainless Steels Stainless Martensitic Steels Stainless Steels Steels Friday, January 10, 2014 Page 25 of 146 By Friday Engraving SAP ID#: 63456 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 9601 Cozycroft Ave #6 Chatsworth Approved CA Yes 91311 818-341-2605 Jim Friday, President Contacts: Vendor Note Custom Engraving Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Basic Supplier Requirements No Cableco SAP ID#: 36416 LMFBM Supplier: 9816 Arlee Ave Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone Santa Fe Sprin Approved Yes Yes CA 90670 562-942-8076 Lonnie Hill QA Manager, James Currie Contacts: Vendor Note Chief products/services: Slings & things for slings hoists, winches & lifting devices, fall protection devices. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CABLE SWAGING/CABLE PRODUCTS No Yes No No Yes No MIL-I-45208A No Yes No ISO-9001:2000 No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Cal-Aurum Industries SAP ID#: 36418 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 15632 Container Lane Huntington Bea Approved CA Contacts: 92649 714-898-0996 Tim Tygard, QM Tim.Tygard@cal-aurum.com Vendor Note Electroless and Electroplating Services Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 AS9100C Friday, January 10, 2014 No No No No Page 26 of 146 No No California Fine Wire Co. SAP ID#: 17581 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 338 South 4th Street Vendor Phone Grover Beach Approved CA 93433 805-489-5144 Joe Ortiz, Quality Mgr. Contacts: Vendor Note Mfr. Of fine and ultra fine wire wire products on a contract free basis. Gardena Location is approved as a Contract mfr. Of custom sealing devices including precision molded rubber products, gaskets washers, shims and custom o-rings. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 California Gasket & Rubber Corporation SAP ID#: 36423 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1601 W. 134th Street Vendor Phone Gardena Approved CA Contacts: 90249 310-323-4250 Scott Franklin, President Ralph Krawiec, QA Manager Bernard Vendor Note Contract mfr. Of custom sealing devices including precision molded rubber products, gaskets washers, shims and custom o-rings. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No No No No MIL-I-45208A No No No ISO 10012-1/17025 No No No ISO-9001:2000 No No No No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements GASKETS INSPECTION SYSTEM REQUIREMENTS PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. RUBBER MOLDED GOODS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 MIL-STD-105 Friday, January 10, 2014 Page 27 of 146 California Technical Plating SAP ID#: 36427 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 11533 Bradley Avenue San Fernando Approved CA Contacts: 91340 818-365-8205 Dave Anzures Jr., QA Manager & President Vendor Note Plating- Chem Film & Electroless Nickel. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ACID PICKLE No No No ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR Yes No No AMS 2400 QQ-P-416 MIL-STD-870 TYPE I,II Yes Yes Yes No No No No No No Yes No No No No No WS 11745 No No No 999-367 No No No AMS 2404 Yes No No AC7004 Yes No No Cadmium Plating chemical processing AS7003 EATON Camarillo Basic Supplier Quality Requirements ELECTRO PLSHNG CRS ELECTROLESS NICKEL PLATING Electroless Plating Nickel NADCAP- Standard Requirements NICKEL PLATING 999-310 MIL-C-26074 QQ-N-290 ELECTROLESS ELECTRO DEPOSITED No Yes No No No No No No No QQ-P-35 TYPE II Yes No No No No No Yes No No No No No No No No Passivation Treatments for Corrosion Resistant Steel PASSIVATION/CLEANING MIL-S-5002 PRECIOUS METAL PLATING QQ-S-365 SILVER SALT SPRAY TESTING MIL-STD-202 METHOD 10 SAND BLASTING Friday, January 10, 2014 Page 28 of 146 Silver Plating AMS 2410 Yes No No ANSI/ASQC Z1.4-1993 No No No No No No No No No SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. TIN PLATING MIL-T-10727 TYPE I VAPOR HONING Caplugs/Eric Dudley Co., Inc.(Protective Closures) 7310 South La Cienega Inglewood SAP ID#: 36433 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Approved Vendor Phone CA 90302 323-678-9085 Jim Ray VP of Operations, Christine Koch QA & Purchasing Ma Contacts: Vendor Note Design manufacture and distributtion of injection Molded, Extruded and Vinyl Dip Molded Protective Products including caps, plugs and netting for industrial uses. Including Automotive, Military and other original equipment applications. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No ISO 14001:2004 No No No ISO-9001:2000 No No No QS-9000 No No No ENVIRONMENTAL MANAGEMENT SYSTEMS QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. QUALITY SYSTEM REQUIREMENTS (AUTOMOTIVE IND Castle Metals (A. M. Castle & Co.) SAP ID#: 36436 LMFBM Supplier: Approved for Use: No Status: Yes LMDenver Supplier: No Vendor Phone 14001 Orange Avenue Paramount Approved CA Contacts: 90723 562-630-1400 Dick Moak, President & CEO John Gray, Corporate Quality Man Vendor Note Various metals. Alcoa, Kaiser, UAC, Alexco Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 29 of 146 No CDM ELECTRONICS SAP ID#: 47552 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 130 American Blvd. Vendor Phone Turnersville Approved NJ 08012 856-740-1200 Mike Liccketto, Quality Mgr. Contacts: Vendor Note Part number M55181-7-01-P Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Century Spring Corporation SAP ID#: 36440 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 222 East 16th Street No Vendor Phone Los Angeles Approved No CA 90015 213-749-1466 Bill Cook, QA Manager Contacts: Vendor Note Manufacturing of commercial springs. Custom manufactured springs. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Cimini & Associates SAP ID#: 89010 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 46 Airport Road Approved Yes Vendor Phone Westerly RI Contacts: 02891 401-348-0388 Bridget Tobin Vendor Note Extruded Silver Tubing, Casting, Drawing, Machining Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo BASIC SUPPLIER QUALITY REQUIRE No Friday, January 10, 2014 Yes Page 30 of 146 No Clariant Corporation SAP ID#: 107717 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 926 Elliot Road Vendor Phone Albion Approved MI 49224 877-546-2885 VP of Sales Dinesh Pandya Contacts: Vendor Note Color concentrate Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 CLK Engineering SAP ID#: 36447 LMFBM Supplier: No No 1173 Calle Suerte Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone Camarillo Approved No CA 93012 805-340-8811 Chris Kluczynski, Owner Contacts: Vendor Note Machine Parts, Prototypes, Tooling Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING GENERAL CNC Manufacturing, Inc. SAP ID#: 39683 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 131 Birch Street Vendor Phone South Coatsvill Approved PA 19320 610-444-4437 Contacts: Vendor Note Machine shop, small parts manufacturing.,Passivation Treatments for Corrosion Resistant Steel Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Eaton Basic Quality System No No No No No No Passivation Treatments for Corrosion Resistant Steel QQ-P-35 Friday, January 10, 2014 Page 31 of 146 CNC Precision SAP ID#: 36451 LMFBM Supplier: 420 S. Date Ave #G Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Alhambra Approved CA Yes 91803 626-289-3721 Chuck Kwan, Owner Contacts: Vendor Note Machining Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Coastline Metal Finishing Corporation SAP ID#: 36453 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 7061 Patterson Drive Vendor Phone Garden Grove Approved CA Yes Contacts: 92841 714-895-9099 Phil M. Viljoen ; Allen Fowler, QA Manager Vendor Note General plating services. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No Yes Yes Yes Yes Yes Yes No No No Yes Yes No No Yes No No Yes No Anodizing AMS 2469 MIL-A-63576 AMS 2468 AMS 2471 AMS 2472 AMS-A-8625 ANODIZING - ALUMINUM MIL-A-8625 MIL-A-8625 MIL-A-8625 TYPE III CL(1) TYPE III - HARD TYPE II-SULF (DY/UDY) Brush Plating MIL-STD-865 CADMIUM PLATING QQ-P-416 TYPE II CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Conversion/Phosphate Coatings Friday, January 10, 2014 Page 32 of 146 AMS 2473 Yes Yes No MIL-C-14550 Yes Yes No AMS 2418 Yes Yes No No Yes No COPPER PLATE, ELECTRODEPOSITED Copper Plating EATON Camarillo Basic Supplier Quality Requirements ELECTROLESS NICKEL MIL-C-26074 CL 3, GRADE A Yes Yes No MIL-C-26074 CL 1 Yes Yes No Yes Yes Yes Yes No No Yes Yes No AMS 2422 Yes Yes No AS9100 No Yes No AC7108 Yes Yes No ELECTROLESS NICKEL PLATE Electroless Plating Nickel AMS 2404 AMS 2405 GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE I, CL 1 Gold Plating Model for Aerospace Quality Assurance Systems NADCAP - Chemical Processing NICKEL PLATING QQ-N-290 AMS-QQ-N-290 ELECTRO DEPOSITED Yes Yes Yes Yes No No QQ-P-35 TYPE II Yes Yes No AMS-QQ-P-35 Yes Yes No MIL-S-5002 No Yes No AMS-P-81728 Yes Yes No MIL-P-81728 Yes Yes No ISO9001:2008 No Yes No Yes Yes Yes Yes Yes Yes No No No PASSIVATION Passivation Treatments for Corrosion Resistant Steel PASSIVATION/CLEANING PLATING TIN-LEAD (ELECTRODEPOSITED) Plating, Tin-Lead (Electrodeposited) Alloy Plating Quality System Silver Plating QQ-S-365 AMS 2412 ASTM B 700 SILVER Stripping Friday, January 10, 2014 Page 33 of 146 MIL-STD-871 Yes Yes No AMS 2700 ASTM A 380 Yes Yes Yes Yes No No Yes Yes Yes Yes No No Surface Treatment/Passivation Tin Plating ASTM B 545 MIL-T-10727 Coining Technologies, Inc. SAP ID#: 36455 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No TYPE II 400 Kuller Road Vendor Phone Clifton Approved NJ 07011 (973)253-0500 John Lipari, Pres.& Gen. Mgr./ Courtney Chronley, Q.M. Contacts: Vendor Note Metal stamping, coining, EDM, CNC & Swiss screw producer for the battery, electronics, defense, automotive & medical industries. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Basic Quality System Requirements No No No No No No Quality System ISO9001:2000 Connector Contacts, Inc. SAP ID#: 36460 LMFBM Supplier: Approved for Use: Yes Status: Yes LMDenver Supplier: No 714 East Edna Place Vendor Phone Covina Approved CA 91723 877-463-9029 Contacts: Vendor Note Detent Pin MOD 545 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No Quality System ISO9001:2008 Friday, January 10, 2014 Page 34 of 146 Consolidated Precision Products [Fomerly PAC Fo 705, 717, 725 Industrial Port Hueneme SAP ID#: 36775 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone CA 93041 805-488-6451 Bill Fanner VP Operations Contacts: Vendor Note Ferrous & non-ferrous, Aerospace Quality, Precision investment castings. Process NAPCAP Spec. AS9100C Continental Heat Treating SAP ID#: 67527 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No LMFBM LM_Denver Type/Class/Limit Yes No CA Contacts: No No Vendor Phone 10643 S. Norwalk Blvd. Santa Fe Sprin Approved Yes Yes 90670 562-944-8808 Don Lowman, Quality Control Manager Vendor Note Heat Treat Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Hardness Testing AC7102/5 No No No AS7003 No No No AC7004 Yes No No AC7102/3 No No No AC7101/4 No No No AC7102 No No No HEAT TREATING NADCAP - AQS - Inspection and Test Quality System NADCAP - Carbuizing NADCAP - Materials Testing Laboratories - Metallography NADCAP Heat Treating Friday, January 10, 2014 Page 35 of 146 Continental Precision Stamping, Inc. SAP ID#: 36461 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 102 Exchange Pl. Vendor Phone Pomona Approved CA 91768 909-594-9014 Christopher Beltran, Quality Supervisor Contacts: Vendor Note Precision Metal Stampling, Wire Forming, Assembly and Machine Design. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit FOUR SLIDE No No No No No No No No No ISO9001:2008 No No No ISO-9001:2000 No No No ISO-9002 No No No PROGRESSIVE DIE PUNCH PRESS Quality System QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. QUALITY SYSTEMS FOR PRODUCTION Cook Induction Heating Co., Inc. SAP ID#: 36462 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 4925 E. Slauson Avenu Maywood Approved Yes CA Contacts: 90270 323-560-1327 Keith Doolittle, President/Ron Winters, Quality Assurance. Vendor Note Induction and furnace brazing, Induction heat treating Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No No Yes No No Yes No AC7102/1 Yes Yes No AC7102 Yes Yes No EATON Camarillo Basic Supplier Quality Requirements HEAT TREAT, COPPER ALLOYS MIL-H-7199 INDUCTION ANNEALING 999-071 T/BRNZ & BRYLM CU Induction Brazing and Furnace Brazing Induction Heat Treating Friday, January 10, 2014 Page 36 of 146 INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No Yes No Yes Yes No AC7110/1 Yes Yes No AC7101/5 Yes Yes No AC7102 Yes Yes No (M2) Rockwell Hardness Yes Yes No MIL-STD-105 No Yes No NADCAP - AQS - Inspection and Test Quality System AC7004 N/A NADCAP - Brazing (Torch/Induction) NADCAP - Materials Testing Laboratories - Hardness NADCAP - STANDARD FOR DISTRIBUTORS (HEAT TRE Rockwell Hardness SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. CO-OPERATIVE INDUSTRIES SAP ID#: 22604 LMFBM Supplier: No Vendor Phone 5133 NORTHEAST PAR FORT WORTH Approved Approved for Use: Yes Status: LMDenver Supplier: No TX 76106 (817)624-4001 Tim Smith, Quality Control Contacts: Vendor Note Design and manufacture industrial metal hose/conduit; PTFE conduit assemblies, flexible metal conduit assemblies, electrical wire harnesses and ingnition leads for the aerospace industry. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System AS9100:2009 ISO9001:2008 Copper & Brass Sales (Fomerly TMX Copper) SAP ID#: 36466 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No No No 13338 Orden Dr. CA Contacts: No No Vendor Phone Sante Fe Sprin Approved No No 90670 800-926-2600 Chong Pak Vendor Note Various metals and bar stock supplies. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit COPPER PREFORMS No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Friday, January 10, 2014 Page 37 of 146 COSMO CONNECTORS CORP SAP ID#: TBD LMFBM Supplier: Approved for Use: Status: Yes LMDenver Supplier: No No 17320 Marquart Ave Vendor Phone Cerritos Approved Ca 90703 562-404-0123 Contacts: Vendor Note Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2000 Crane Technology Co. Inc. SAP ID#: 1923 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No Approved No Vendor Phone 742 Hampshire Road, UWestlake Villag CA Yes No 91361 805-379-4948 Dale E. Crane, President Marsha Haik, General Manager Contacts: Vendor Note Metal fabrication.Waterjet Cutting & Manufacturing Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No MACHINING GENERAL CSI Trading Company SAP ID#: 66235 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 121 Flanders Rd. Vendor Phone Westborogoug Approved MA 01581 508-986-2300 Contacts: Vendor Note Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Friday, January 10, 2014 No No Page 38 of 146 No CSL Operating, LLC SAP ID#: 38622 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 529 Aldo Avenue Vendor Phone Santa Clara Approved CA 95054 1-408-727-0893 Hemendra Gohil hgohil@csl-plating.com Contacts: Vendor Note Chemical Processing and Selective Plating Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A MIL-A-8625 No No No MIL-C-5541 No No No AMS-C-26074 No No No AMS 2404 No No No AC7108/1 No No No AC7108/3 No No No MIL-C-26074 No No No AMS 2403 No No No AMS-QQ-P-35 QQ-P-35 No No No No No No AMS 2700 No No No ASTM A 967 No No No CHEMICAL CONVERSION COATINGS ON ALUMINUM A COATINGS, ELECTROLESS NICKEL Electroless Plating Nickel NADCAP - Painting and Dry Film Coatings NADCAP - Surface Preparation Prior to Metal Bond NICKEL PLATE, ELECTROLESS Nickel Plating Passivation Treatments for Corrosion Resistant Steel Surface Treatment/Passivation Cutting Edge Manufacturing SAP ID#: 88909 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 3541 Old Conejo Rd #1 Newbury Park Approved CA Contacts: 91320 Steve Elchyshyn 805-498-6535 Vendor Note CNC Machining - Website: www.cutting-edge-mfg.com Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Friday, January 10, 2014 No No Page 39 of 146 No Cytec Engineered Materials, Inc. (1) SAP ID#: 36474 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 1300 Revolution St. Vendor Phone Havre De Grace Pending Survey MD Yes 21078 410-939-1910 Doug Kevis Quality Mgr. Desmond McKnight Plant Mgr. Contacts: Vendor Note Aerospace adhesives, pastes, primers, composite prepregs (Excluding iso elements 7.3 Design and 7.5.1.5 Servicing.) Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit ADHESIVE No Yes No No Yes No MIL-I-45208A No Yes No AS9100 No Yes No ISO-9001:2000 No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS Model for Aerospace Quality Assurance Systems QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. D.B. Roberts SAP ID#: 23305 LMFBM Supplier: 800 Del Norte Blvd. No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Oxnard Approved CA 93030-8971 805-988-4882 Mark Harris, VP/GM/Tony Mortellaro, Q.A. Mgr. Contacts: Vendor Note PEM Fasteners & related product lines. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Da/Pro Rubber SAP ID#: 50460 LMFBM Supplier: 28635 N. Braxton Ave No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Valencia Approved CA Contacts: 91355 661-775-6290 Mike Elkins, Q.A.M./Gretchen Brauninger, Pres. Vendor Note Rubber molded parts (Compression, Transfer, Insert and Injection). Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System Friday, January 10, 2014 Page 40 of 146 ISO9001:2008 Dameron Alloy Foundries (Formerly Precision Mic SAP ID#: P18102 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No 927 So. Santa Fe Ave No Vendor Phone Compton Approved CA Yes No 90224 310-631-5165 Jeff Milucky VP Oper./ Lanny Notman Dir. QA Contacts: Vendor Note Mfr. And machining of investment castings for the commercial market (iso exludes: 7.3- design control) Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit NADCAP - Fusion Welding AC7110/5 No Yes No AC7110/12 No Yes No AS7003 No Yes No AC7100 No Yes No ISO9001:2008 No Yes No NADCAP - Welder/Welding Operator Qualification Nadcap - Welding NADCAP WELDING / BRAZING Quality System Database Providers SAP ID#: 9999999 LMFBM Supplier: Approved for Use: Status: Yes LMDenver Supplier: No No Vendor Phone tdodge@databaseprovi San Diego Approved CA Contacts: 92127 858-335-6421 Tim Dodge Vendor Note Vendor for the Access Databases and the Corrective Action Databases. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC COOPER QUALITY REQUIREMENTS No Day-Glo Color Corp. SAP ID#: 63455 LMFBM Supplier: 4515 St. Clair Approved for Use: No Status: Yes LMDenver Supplier: No OH Contacts: No Vendor Phone Cleveland Approved No 44103 800-289-3294 Mary Taylor - Mtaylor@dayglo.com Vendor Note Fluorescent Pigments, inks, bases, dyes and coatings Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS Friday, January 10, 2014 Page 41 of 146 No No No No No No ISO 9001:1998 Dayton Rogers of California(Federal Stamping) SAP ID#: 26937 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 13630 Saticoy Street Vendor Phone Van Nuys Approved CA 91402 818-787-6670 Charles Frazer Quality Manager Contacts: Vendor Note Manufacture of metal stampings, sheet metal fabrication, forming, tube forming, and assembly. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No Yes No No PUNCH PRESS QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Diamond Fasteners SAP ID#: 47189 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 20 B Commerce Drive Hauppauge Approved NY Contacts: 11788 631-694-2766 Angelo Aniano,angelo@diamondfast.com Vendor Note "Distributor and value added manufacturer of standard & specialty fasteners, components,and electronic hardware for the commercial, aviation, space, and defense industries." Process Spec. AS9100C NAPCAP LMFBM LM_Denver Type/Class/Limit No No No No No No No No No EATON Camarillo BASIC SUPPLIER QUALITY REQUIRE Quality System ISO9001:2008 Friday, January 10, 2014 Page 42 of 146 Dicronite Southwest SAP ID#: 36495 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 1495 W 9th St. Suite 20 Upland Approved Yes CA Contacts: 91786 909-982-5100 Alvin Rhynard, Owner/Mary Flores, QC Manager/ Mark Bustam Vendor Note Dry film lubricant. Not approved pending Lockheed Sunnyvale approval. Sherry Wampler working on this. Requested new supplier survey from vendor. Approval from LM on 7/11/11 & added approval to folder. JB Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes No DOD-L-85645 999-146 No No Yes Yes No No MIL-I-45208A No Yes No ISO9001:2008 ISO9001:2008 AS9100 No No No Yes Yes Yes No No No MIL-STD-105 No Yes No DRY FILM LUBE INSPECTION SYSTEM REQUIREMENTS Quality System SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Digi-key Corporation SAP ID#: 8495 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 701 Brooks Avenue So Thief River Fall Approved MN 56701 800-344-4539 Contacts: Vendor Note Distribution of Electronic Components Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit MISCELLANEOUS ITEMS/SERVICES No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Friday, January 10, 2014 Page 43 of 146 Diversified Images, Inc. SAP ID#: 36498 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 27955 Beale Court Vendor Phone Valencia Approved CA Yes 91355 661-702-0003 Robert W. Waycott, President/ William C. Waycott, GM & QA M Contacts: Vendor Note Silkscreening. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No MIL-I-45208A No Yes No 999-091-15 No Yes No No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MARKING OF SILICONE RUBBER COMPONENTS SILK SCRNG/ENGRVG/NAMEPLATING SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Dixon Hard Chrome, Inc. SAP ID#: 36499 LMFBM Supplier: Approved for Use: No Status: Yes LMDenver Supplier: No Vendor Phone 11645 Pendleton Street Sun Valley Approved CA Contacts: 91352 818-767-9650 Ron Dixon, President Bruce Rogers, QC Manager Larry Dixon, I Vendor Note On Boeing's AVL for MIL-C-26074 Electroless Nickel. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit No No No ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR No No No QQ-P-416 TYPE I,II No No No No No No No No No No No No CADMIUM PLATING CHEMICAL PROCESSING AC7108 CHROMIUM PLATING QQ-C-320 CL 1, TYPE I, II EATON Camarillo Basic Supplier Quality Requirements Friday, January 10, 2014 Page 44 of 146 MAGNETIC PARTICLE INSPECTION MIL-STD-1949 No No No AC7004 No No No No No No No No No No No No No No No No No No NADCAP- Standard Requirements NICKEL PLATING MIL-C-26074 QQ-N-290 ELECTROLESS ELECTRO DEPOSITED PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 PASSIVATION QQ-P-35 TYPE II PENETRANT INSPECTION (MIL-I-6866) MIL-STD-686 DPA Components International SAP ID#: D00255 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 2251 Ward Avenue Vendor Phone Simi Valley Approved CA 93065 805-581-9200 Douglas Young, President Contacts: Vendor Note Testing services and failure analysis. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Durkee Testing Laboratories, Inc. SAP ID#: 37398 LMFBM Supplier: Approved for Use: Yes Status: Yes LMDenver Supplier: No No 15700 Texaco St. CA Contacts: No Vendor Phone Paramount Approved No 90723 562-531-7111 John Durkee, President, Dwight Atchison QA Manager Vendor Note Testing, destructive and salt spray. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No AC7006 Yes Yes No AC7108 Yes Yes No AC7101/6 Yes Yes No NADCAP - Accreditation to ISO/IEC 17025 NADCAP - Chemical Processing NADCAP - Materials Test Laboratories - Corrosion NADCAP - Materials Test Laboratories - Heat Treating Friday, January 10, 2014 Page 45 of 146 AC7101/9 Yes Yes No AC7101/2 Yes Yes No NADCAP - Materials Testing Laboratories - Chemical Testi NADCAP - Materials Testing Laboratories - General AC7101/1 Rev C Yes Yes No AC7101/5 Rev 5 Yes Yes No Yes Yes No Yes Yes No AC7101/7 Yes Yes No AC7110/13 Yes Yes No NADCAP - Materials Testing Laboratories - Hardness NADCAP - Materials Testing Laboratories - Mechanical Tes AC7101/3 NADCAP - Materials Testing Laboratories - Metallography AC7101/4 Rev C NADCAP - Mechanical Testing Specimen Preparation NADCAP - Metallographic Evaluation of Welds E. Jordan Brookes & Co., Inc. SAP ID#: 36511 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 10634 Shoemaker Ave. Santa Fe Sprin Approved CA 90670 562-968-2100 Robert J Brookes, President, Ken Winiecki QA Manager Contacts: Vendor Note Distributor of copper alloy materials and engineered plastics ISO 9001:2000 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No MIL-I-45208A No No No ISO-9001:2000 No No No INSPECTION SYSTEM REQUIREMENTS QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. E. V. Roberts SAP ID#: 36513 LMFBM Supplier: 18027 Bishop Ave Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone Carson CA Contacts: 90746-4019 310 204-6159 Ron Cloud CEO, Douglas Scott VP Operations Vendor Note Distributor & Mfr of adhesives, Sealants, Coatings, Encapsulants, etc. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ADHESIVE No Friday, January 10, 2014 Yes Page 46 of 146 No COOPER BASIC SUPPLIER QUALITY REQUIREMENTS No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A E/M Coating Services SAP ID#: 36515 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: Yes 6940 Farmdale Ave. Approved Yes Vendor Phone North Hollywoo CA Contacts: 91605 818-983-1952 Tony Quiros, Quality Mgr. Vendor Note Passivation, chem film, anodize, dry film lube. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit NADCAP Yes Yes Yes MIL-L-85645 MIL-PRF-46147 MIL-PRF-46010 WS20290 WS9004 MIL-L-23398 MIL-L-46147 MIL-L-81329 WS9425 MIL-P-23377 MIL-PRF-81329 MIL-PRF-22750 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes MIL-A-8625 Yes Yes Yes AMS 2471 AMS 2472 AMS 2468 MIL-A-63576 AMS 2469 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes CL IV, TYPE I, II, IV ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A Anodizing ANODIZING - ALUMINUM MIL-A-8625 MIL-A-8625 TYPE II-SULF (DY/UDY) TYPE III CL(1) ANODIZING-TITANIUM Friday, January 10, 2014 Page 47 of 146 AMS 2488 Yes Yes Yes No Yes Yes WS9030 No Yes Yes DOD-P-16232 TT-C-490 AMS 2480 Yes Yes Yes Yes Yes Yes Yes Yes Yes AMS 2486 Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes AC7108 Yes Yes Yes AC7108/1 Yes Yes Yes Yes Yes Yes AMS-QQ-P-35 Yes Yes Yes MIL-S-5002 No Yes Yes AS9100B ISO9001:2000 No No Yes Yes Yes Yes MIL-S-13165 No Yes Yes AMS 2700 ASTM A 380 ASTM A 967 Yes Yes Yes Yes Yes Yes Yes Yes Yes 958-203 No Yes Yes CADMIUM PLATING QQ-P-416 TYPE II Chemical Films for Aluminum and Aluminum Alloys, Gener Conversion/Phosphate Coating Conversion/Phosphate Coatings EATON Camarillo Basic Supplier Quality Requirements LUBRICANT, SOLID FILM, HEAT CURED, CORROSION I MIL-L-8937 (WS17657) MIL-L-46010 TYPE I, II NADCAP - Chemical Processing NADCAP - Painting and Dry Film Coatings PASSIVATION QQ-P-35 TYPE II Passivation Treatments for Corrosion Resistant Steel PASSIVATION/CLEANING Quality System SHOT PEENING Surface Treatment/Passivation TEFLON BLACK 958-203 PER 999-191 REV. A Friday, January 10, 2014 Page 48 of 146 Earle M. Jorgensen Steel Co. SAP ID#: 36517 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 10650 S. Alameda St. Vendor Phone Los Angeles Approved CA 90262 323-567-1122 Tim Donofrio (QM) Joe Howard outside sales Mike Pellouchoud Contacts: Vendor Note Distribution and processing of ferrous and nonferrous metals. Parent Company: Reliance Steel and Aluminum 350 S. Grand Ave., Ste 5100, Los Angeles, CA 90071 213-687-7700 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No No No No No No No FERROUS METALS MISCELLANEOUS ITEMS/SERVICES NON-FERROUS METALS QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 EAS Manufacturing Co, Inc. SAP ID#: 83291 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 804 Via Alondra Vendor Phone Camarillo, Approved CA 93012 805-987-3665 Florin Banu, florin@easmfg.com Contacts: Vendor Note Precision Machine Shop Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Ed Fagan, Inc. SAP ID#: 36519 LMFBM Supplier: 10535 HUMBOLT ST No Approved for Use: Yes Status: LMDenver Supplier: No CA Contacts: No Vendor Phone Los Alamitos Approved No 90720 800-782-9657 Ronald E. Stiles, Operation Mgr./Kevin Dillion, Quality Control. Vendor Note Distribution of specialty metal alloys Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements Friday, January 10, 2014 Page 49 of 146 No No No No No No Quality System ISO-9001:2008 EL-Com/Cabletek SAP ID#: 36524 LMFBM Supplier: No 12691 Monarch St. Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Garden Grove Approved CA 92841 714-230-6100 Elie Vrobel, President/Bary Luke, VP Operations. Contacts: Vendor Note EMI/RFI Shielding gaskets; cable harnesses & sub-assemblies; Orings Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EMI AND RFI SHIELDING No No No No No No ISO9001:2000 No No No ISO-9001:2000 No No No GASKETS Quality System QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Electro Adapter, Inc. SAP ID#: 36526 LMFBM Supplier: Approved for Use: Yes Vendor Phone 20640 Nordhoff Street Chatsworth Status: Yes LMDenver Supplier: No Approved CA Contacts: 91311 818-998-1198 Marco (Tony) Quiros, QC Manager John Smith, QA Manager Vendor Note Metal finishing, connectors, die castings and plating services. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes No No Yes No No Yes No No Yes No No Yes No No Yes No CONN.PARTS(HOOD,B/SHELLSETC) EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MAGNAFORMING Model for Aerospace Quality Assurance Systems AS9100 Friday, January 10, 2014 Page 50 of 146 NICKEL PLATING MIL-C-26074 Electrochem Solutions, LLC SAP ID#: 38803 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No ELECTROLESS 32500 Central Ave No No Vendor Phone Union City Approved Yes CA 94587 510-476-1840 David Rossiter, Pres./CEO Contacts: Vendor Note Processor for Precision Resource Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Electron Beam Welding Inc. SAP ID#: 36529 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 6940 Hermosa Circle CA Contacts: No Vendor Phone Buena Park Approved Yes No 90620 714-670-9119 Larry Sato, Quality Manager & President Vendor Note Electron Beam Welding Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No AC7110/3 Yes Yes No MIL-STD-1595 No Yes No 999-056 No Yes No MIL-W-46132 No Yes No No Yes No MIL-W-46132 No Yes No MIL-I-45208A No Yes No NHB 5300.4(1C) No Yes No AC7110/3 Yes Yes No Electon Beam Welding FSN WLD (ALL) FSN WLD (ALL) (EBW) FSN WLD ALM,MAG,TT&ALM-BRYLM (EBW) FSN WLDG STEEL & SUPER ALLOYS 999-056 EBW FSN WLDG STEEL & SUPER ALLOYS (EBW) INSPECTION SYSTEM REQUIREMENTS INSPECTION SYSTEM REQUIREMENTS (NASA) NADCAP - Electron Beam Welding Friday, January 10, 2014 Page 51 of 146 NADCAP - Metallographic Evaluation of Welds AC7110/13 Yes Yes No AC7110/12 Yes Yes No AC7004 No Yes No ISO-9002 No Yes No AC7110 Yes Yes No NADCAP - Welder/Welding Operator Qualification NADCAP- Standard Requirements QUALITY SYSTEMS FOR PRODUCTION WELDING/BRAZING Emerson Network Power Connectivity Solutions SAP ID#: 36966 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 2920 Johnson Ave. SW Waseca Pending Survey MN Yes 56093 507-833-8822 Doug Pennington VP/Sales, Iain Proctor QM, Cindy Hawkins m Contacts: Vendor Note RF & Mocrowave Connectors, Cables, & Cable Assemblies tamera.mata@emerson.com. Formerly known as Trompeter Electronics, Inc. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No MFG &/OR ASSY. CONNECTORS QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Environment Associates Inc. SAP ID#: 36538 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Yes 9604 Variel Avenue Vendor Phone Chatsworth Approved CA Contacts: 91311 818-709-0568 William L. Spaulding, President/William Fenimore, Q.A. Mgr. Vendor Note Environmental testing services. ISO/IEC 17025:2005 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ISO/IEC 17025:2005 No Yes No ANSI/NCSL Z540-1 No Yes No No Yes No CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. COOPER BASIC SUPPLIER QUALITY REQUIREMENTS Friday, January 10, 2014 Page 52 of 146 General Requirements for the Competence of Testing ISO/IEC 17025-2005 No Yes No ISO 10012-1/17025 No Yes No MIL-STD-810 No Yes No MIL-STD-883 No Yes No PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. RAIN Thermal Epoxy Technology Inc. SAP ID#: 36542 LMFBM Supplier: No 14 Fortune Drive Approved Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Billerica MA Contacts: 01821 978-667-3805 Cindy Armstrong, QA Mgr. Vendor Note Design, Manufacture and Supply of Epoxy Resins and Adhesives. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Everlube Products (Fomerly E/M Corporation) SAP ID#: 36546 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 100 Cooper Circle Vendor Phone Peachtree City Approved GA 30269 1-800-428-7802 Contacts: Vendor Note Lubri-Bond B Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No ISO 10012-1/17025 No No No ISO-9001:2000 No No No MIL-STD-105 ANSI/ASQC Z1.4-1993 No No No No No No PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Friday, January 10, 2014 Page 53 of 146 Experior Photonics SAP ID#: 68033 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1635 Ives Avenue Vendor Phone Oxnard Approved CA 93033 (805)483-3400 Lorenz Cartellieri Contacts: Vendor Note Qualification testing services. Photonic/Fiber Optic instrument calibration service. Mechanical, Enviromental,& Optical testing Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No No No No No No Mechanical, Enviromental,& Optical testing ISO TS 17025:2008 Falmat, Inc. SAP ID#: 14958 LMFBM Supplier: 1873 Diamond St No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone San Marcos Approved CA 92078 760-471-5400 Claire Gilbert, QA Manager; Brian Falk, President Contacts: Vendor Note Custom Manufactured cable and cable assemblies. Distributor of wire Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662 No No No No No No MIL-I-45208 No No No ISO9001:2000 No No No MIL-STD-105 No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS Quality System SAMPLING PROCEDURES AND TABLES Farad Industries, Inc. SAP ID#: 36552 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 20435 Grammercy Plac Torrance Approved CA Contacts: 90501 310-320-4260 Fred Bayer, QA Mgr. Vendor Note Vacuum Impregnation Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS Friday, January 10, 2014 Page 54 of 146 MIL-STD-45662A No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Fast Lane Precision SAP ID#: 63177 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 2220 Eastridge Ave Ste Riverside Approved CA 92507 951-653-5660 Kathleen Jurls, Q.C. Mgr./Barry Kitchen, Owner Contacts: Vendor Note Fasteners/Hardware, Connectors, Cable Assemblies, Electrical parts and components, Raw stock Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIRMENTS No Fralock Div. Of Lockwood Industries, Inc SAP ID#: 36561 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone 28525 West Industry Dr Valencia Approved No CA 91355 661-702-6999 Noel Tucker, President Gilberto Resendiz, Quality Control Mana Contacts: Vendor Note Converter and distributor of thin films, foams, foils, adhesives and cirlex. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No Model for Aerospace Quality Assurance Systems AS9100 Fry Steel Company SAP ID#: 36563 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 13325 Molette Street Approved Yes Vendor Phone Santa Fe Sprin CA Contacts: 90670 562-802-2721 Stephen Fry, President/CEO Bunny Isaka, QA Manager Vendor Note Wholesale distribution of Steel Bars, Brass, Nickel-Aluminum-Bronze, and Aluminum. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 Yes Page 55 of 146 No MISCELLANEOUS ITEMS/SERVICES No Yes No ISO-9001:2000 No Yes No ISO-9002 No Yes No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. QUALITY SYSTEMS FOR PRODUCTION G. F. Cole Corp. SAP ID#: 36565 LMFBM Supplier: 21735 Western Ave. Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Torrance Approved CA Yes 90501 310-320-0601 Fritz Cole V.P. Contacts: Vendor Note Non-Matalic Gaskets and Materials. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No Quality System ISO9001:2008 Galaxy Brazing Co., Inc. SAP ID#: 36567 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 10015 Freeman Avenue Santa Fe Sprin Approved CA Contacts: 90670 562-946-9039 Donna McKee, Quality Assurance Manager/Vladimir Sapaner, Vendor Note Brazing, welding, soldering & heat treating. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Brazing (Torch/Induction) Brazing AC7110/1 Yes No No ANSI/NCSL Z540-1 No No No No No No No No No No No No MIL-STD-2219 No No No AC7110/5 Yes No No CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. DIP BRAZE MIL-B-7883 MIL-B-7883 TYPE V, ALUM TYPE II, ALUM EATON Camarillo Basic Supplier Quality Requirements FSN WLD ALM,MAG,TT&ALM-BRYLM (GTAW) Fusion Welding INSPECTION SYSTEM REQUIREMENTS Friday, January 10, 2014 Page 56 of 146 MIL-I-45208A No No No AC7004 Yes No No AC7004 Yes No No MIL-W-6858 No No No MIL-W-6858 No No No ANSI/ASQC Z1.4-1993 No No No AC7110 Yes No No NADCAP - AQS - Inspection and Test Quality System NADCAP- Standard Requirements RESIST. WLDG ALM,MAG & TT RESIST.WLDG STL & SUPER ALLOY (SEAM & SPOT) G SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. WELDING/BRAZING General Aircraft Company SAP ID#: 36575 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 321 Kinetic Drive Vendor Phone Oxnard Approved CA Yes 93030 805-983-8500 William Hutchins, President Raymond Matthies, QC Manager Contacts: Vendor Note Distributor of Commercial and Electronic hardware. QUEST Supplier 1/07 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No FASTENERS PROCESSING General Electric (General Electric Nuclear EnergySAP ID#: 36577 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 6705 Vallecitos Rd. Vendor Phone Sunol Approved CA Contacts: 94586 925-862-4383 Gaby , Quality Program Mgr.-VNC site/Edward Ehrlich, Quality/ Vendor Note Neutron radiography services ISO Compliant Did not renew certs, Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No NEUTRON RADIOGRAPHY AS APPLICABLE QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Friday, January 10, 2014 Page 57 of 146 General Metal Finishing SAP ID#: 47554 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 134 Center St. Vendor Phone El Segundo Approved CA 90245 (310)414-4000 David Slater, Pres. Contacts: Vendor Note Approval for processing of these part numbers only: 6100-0212-002 6100-0226-000 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Gerhardt Gear Co., Inc. SAP ID#: 37247 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone 133 E. Santa Anita Ave Burbank Approved No CA 91502-1926 818-842-6700 Ronald Gerhardt, President Fritz Gerhardt, VP of Quality Zack Contacts: Vendor Note Manufacture gears custom parts. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit GEARS/JACK SCREWS No No No ISO 10012-1/17025 No No No ISO9001:2008 No No No ISO-9002 No No No ANSI/ASQC Z1.4-1993 No No No PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. Quality System QUALITY SYSTEMS FOR PRODUCTION SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Glenair Inc. SAP ID#: 5811 LMFBM Supplier: 1211 Air Way No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Glendale Approved CA Contacts: 91201 818-247-6000 Gary Carr, QA Manager Vendor Note Connector accessories.MISCE Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 58 of 146 No Quality System ISO9001:2008 Global Silicones SAP ID#: 66535 LMFBM Supplier: No No 49 Industrial Way Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone Buellton Approved No CA 93427 805-686-4500 Erin Kelsey (QM) Santiago Speceiro (VP Sales) Joel Aguilar (c Contacts: Vendor Note custom compounded raw silicone materials Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Graphic Controls Corporation SAP ID#: 36588 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone 400 Exchange Street P Buffalo Approved No NY 14240-1271 716-853-7500 Ken Jablonicky, QA Manager; John Bellott, VP Manufacturing Contacts: Vendor Note Recording Charts and Supplies Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 H.S.G Manufacturing SAP ID#: 46912B LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No CA Contacts: No Vendor Phone 13346 Monte Vista Ave. Chino Approved No 91710 909-902-5915 Gill Singh Vendor Note gill@hsgmanufacturing.com Subtier Suppliers: High Speed Steel Treating, MJ Plating, R.G.F. Enterprises Inc., Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo BASIC SUPPLIER QUALITY REQUIRE No Friday, January 10, 2014 No Page 59 of 146 No Hales Engineering Co., Inc. SAP ID#: 36596 LMFBM Supplier: No 18 Wood Road Approved Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Camarillo CA 93010 805-484-2736 Billy Belcher, Quality Manager Contacts: Vendor Note Machine Shop. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING GENERAL Hawk Electronics SAP ID#: 59571 LMFBM Supplier: No 511 Glenn Ave. Approved Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Wheeling IL 60090 800 843-4295 Ken Thomson QM kt@hawkusa.com Contacts: Vendor Note We buy in bulk and sell in pieces. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 HCC Machining Corp. (Div. of Hermetic Seal) SAP ID#: 37563-1 Approved for Use: Yes Status: LMFBM Supplier: No LMDenver Supplier: No No 4501 Arden Drive CA Contacts: No Vendor Phone El Monte Approved No 91731 626-443-8931 Monica Gonzalez, Quality Manager / Harminder Badesha, Quali Vendor Note Machining operations solely for and owned by Hermetic Seal Corporation Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No No No No No No Quality System ISO9001:2008 Friday, January 10, 2014 Page 60 of 146 Heat Bath Corp. SAP ID#: 23399 LMFBM Supplier: No 107 Front Street Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Indian Orchard Approved MA 01151 413-452-2000 Contacts: Vendor Note Custom Metal Finishing, Heat Treating and Cleaning Chemicals MISCELLANEOUS ITEMS/SERVICES Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Helium Leak Testing, Inc. SAP ID#: 36599 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 19348 Londelius Street Northridge Approved Yes CA Contacts: 91324 818-349-4690 Jeff Markel (president/CEO) Vendor Note Leak detection service, calibration service vacuum technology sales, service. VP of Sales: Jeff Markel jmarkel@heliumleaktesting.com Main Contact: Mike Markel mmarkel@heliumleaktesting.com Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes No No Yes No No Yes No No Yes No MIL-I-45208A No Yes No ISO 10012-1/17025 No Yes No CALIBRATION CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. Friday, January 10, 2014 Page 61 of 146 Henkel (Frmly: Emerson & Cuming) SAP ID#: 46912 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 20021 Susana Road Vendor Phone Rancho Domin Approved CA 90221 310-764-4600 James C. Richards (President), Andy Glosecki (Director of Qual Contacts: Vendor Note Adhesives, encapsulants and coatings. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Henkel Corporation (2) SAP ID#: 7217 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No 46 Manning Rd No Vendor Phone Billerica Approved No MD 01821 Brian Betti Contacts: Vendor Note Adhesives,Encapsulants, and Coatings Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System AS9100B ISO9001:2000 Hermetic Seal Corporation SAP ID#: 37563 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No No CA Contacts: No No Vendor Phone 4232 Temple City BouleRosemead Approved No No 91770 626-443-8931 Monica Gonzalez, Quality Manager / Harminder Badesha, Quali Vendor Note Design and Manufacture of Hermetically sealed products. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No AS9100 No No No ISO-9001:2000 No No No GLASS & GLASS TO METAL SEALS Model for Aerospace Quality Assurance Systems QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Friday, January 10, 2014 Page 62 of 146 Hixson Metal Finishing SAP ID#: 36600 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: Yes 829 Production Pl. Vendor Phone Newport Beach Approved CA Yes Contacts: 92663 949-645-4800 Dave Greene, President/Mark Soward, Q.C. Mgr. Vendor Note Metal finishing. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ACID PICKLE No Yes Yes No Yes Yes No Yes Yes No Yes Yes No No Yes Yes Yes Yes No Yes Yes AC7004 Yes Yes Yes AC7108 Yes Yes Yes AC7108/2 Yes Yes Yes AC7108/1 Yes Yes Yes AC7108/3 Yes Yes Yes AC7114 Yes Yes Yes AC7114/2 Yes Yes Yes AC7114/1 Yes Yes Yes 999-310 No Yes Yes ISO 9001:2008 AS 9110:2009 No No Yes Yes Yes Yes ALUMINUM CONVERSION COATING WS 9030 CHEMFILM TYPE I (LMSC) BARRELL FINISH Chemical Processing AS7003 COATINGS WS 17657 999-034 E/F #5306 E/F#4396 EATON Camarillo Basic Supplier Quality Requirements NADCAP - AQS - Inspection and Test Quality System NADCAP - Chemical Processing NADCAP - Etch Processes (Blue Etch Anodize, Local, Mac NADCAP - Painting and Dry Film Coatings NADCAP - Surface Preparation Prior to Metal Bond NADCAP NonDestructive Testing NADCAP NonDestructive Testing - Magnetic Particle NADCAP NonDestructive Testing - Penetrant NICKEL PLATING Quality System Friday, January 10, 2014 Page 63 of 146 ISO9001:2008 No Yes Yes No Yes Yes SAND BLASTING HMC Electronics SAP ID#: 4785 LMFBM Supplier: No 33 Springdale Ave Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Canton Approved MA 02021 781-821-1870 Kathy Heffernan, kheffernan@hmcelectronics.com Contacts: Vendor Note tools, test equipment and supplies for the Electronics Industry Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No No No No No No BASIC QUALITY SYSTEM REQUIREMENTS Homer R. Dulin Company SAP ID#: D15752 Approved for Use: Yes Status: LMFBM Supplier: No LMDenver Supplier: No 729 E Willow Street Vendor Phone Signal Hill Approved CA 90755 562-424-8533 Ronald H. Dulin, President/QA Manager Contacts: Vendor Note Pneumatic and hydraulic flowmeter calibration service. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC SUPPLIER REQUIREMENTS No Houston Rubber Co., Inc. SAP ID#: 36608 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Approved CA Contacts: No Vendor Phone 12623 Foothill BoulevarSylmar Yes No 91342 818-899-1108 Thane Fang Neely, QA Manager & President. Vendor Note Custom molded rubber products.RUBBER MOLDED GOODS Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 Yes Page 64 of 146 No Hudson Plating Works SAP ID#: 36609 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: Yes 11941 Hertz St. Vendor Phone Moorpark Approved CA Contacts: 93021 805-517-1222 David Hudson President, Joseph Gonzales QA Manager Vendor Note Metal finishing Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit COPPER PLATE, ELECTRODEPOSITED MIL-C-14550 Yes No Yes AMS 2418 Yes No Yes No No Yes Yes Yes No No Yes Yes Yes No Yes AMS 2425 AMS 2422 Yes Yes No No Yes Yes AC7004 Yes No Yes AS7003 Yes No Yes Yes Yes Yes Yes Yes Yes No No No No No No Yes Yes Yes Yes Yes Yes Yes No Yes Yes No Yes Yes Yes Yes Yes No No No No Yes Yes Yes Yes Copper Plating EATON Camarillo Basic Supplier Quality Requirements Electroless Plating Nickel AMS 2405 AMS 2404 GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE I, CL 1 Gold Plating NADCAP - AQS - Inspection and Test Quality System NADCAP Chemical Processing NICKEL PLATING MIL-C-26074 AMS 2423 QQ-N-290 AMS 2403 AMS 2424 MIL-P-27418 ELECTROLESS QQ-P-35 TYPE II ELECTRO DEPOSITED PASSIVATION Plating, Tin-Lead (Electrodeposited) NADCAP Alloy Plating MIL-P-81728 Silver Plating QQ-S-365 AMS 2411 ASTM B 700 AMS 2410 Friday, January 10, 2014 SILVER Page 65 of 146 AMS 2412 Yes No Yes ASTM A 380 Yes No Yes Yes Yes Yes No No No Yes Yes Yes Surface Treatment/Passivation Tin Plating ASTM B 545 MIL-T-10727 AMS 2408 Huntington Park Rubber Stamp SAP ID#: 36612 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No TYPE I 2761 E. Slauson Vendor Phone Huntington Par Approved CA 90255 323-582-6461 Mary Barlam, Pres/Robert Barlam, VP Contacts: Vendor Note Rubber Stamps. Hard polymer (steel backed) imprinting plates, rubber stamps, industrial marking inks, inspection stamps, engraved nameplates and interior sign age and a variety of marking and identification products. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Hydra Calibration (previously A-A Enterprises) SAP ID#: 7726 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone 1010 N. Batavia St. Suit Orange Approved No CA 92867 714-771-2982 Michael Ring mring@hydracalibration.com Contacts: Vendor Note Michael Ring VP/Owner Andrea Ring - QM Christina Drury - Admin Assist Process NAPCAP Spec. No Industrial Dist. Group Of California SAP ID#: 8569 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No LMFBM LM_Denver Type/Class/Limit NC Contacts: No Vendor Phone 2100 The Oaks ParkwayBelmont Approved No 28012 (704) 398-5600 CAROL MARKS QUALITY MANAGER/ ED GERBER VP SALE Vendor Note Mainetenance, Repair, Operations and Production (MROP) supplies (distribution only) Website: idgsupply.com Process Friday, January 10, 2014 Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Page 66 of 146 Quality System ISO9001:2008 No No No ISO-9001:2000 No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Industrial Tectonics SAP ID#: 7093 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 7222 W. Huron River Vendor Phone Dexter Approved MI 48106 (734)426-4681 Douglas nummerdor Oper Mgr / Lisa Bernhardt QA Eng. Contacts: Vendor Note Custom manufactured spherical products and high precision balls of various materials. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No MIL-I-45208A No No No ISO9001:2000 No No No QS-9000 No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS Quality System QUALITY SYSTEM REQUIREMENTS (AUTOMOTIVE IND Insulation Supply Co. SAP ID#: 36626 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1901 Harpers Way Vendor Phone Torrance Approved CA Contacts: 90501 310-320-9400 Bob Foster, CEO James Short, QA Manager Vendor Note Distributor of electromechanical components, Adhesives, Tapes. Heat shrinkable Tubing. QUEST 8/06 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No No No No No No No CUTTING AND MARKING EATON Camarillo Basic Supplier Quality Requirements Model for Aerospace Quality Assurance Systems AS9100 Quality System Friday, January 10, 2014 Page 67 of 146 ISO9001:2000 No No No ANSI/ASQC Z1.4-1993 No No No SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. J. R. Industries SAP ID#: 4585 LMFBM Supplier: 31280 La Baya Drive Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone West Lake Villa CA 91362 818-706-2424 Gary Becker, Acting Q.A. Manager Contacts: Vendor Note Distribution of electronic hardware including MIL-SPEC fasteners, custom fittings and contract assembly. . Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No MIL-I-45208A No Yes No MIL-STD-105 No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Jack C. Drees Grinding Co., Inc. SAP ID#: 36638 LMFBM Supplier: Approved for Use: Yes Status: Yes LMDenver Supplier: No Vendor Phone 11815- B Vose Street No. Hollywood Approved CA Contacts: 91605 818-764-8301 Jack C. Drees, Owner Vendor Note Precision flat grinding & lapping. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A PRECISION GRINDING Friday, January 10, 2014 Page 68 of 146 Johnson Manufacturing Company SAP ID#: 3209 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 114 Lost Grove Road Vendor Phone Princeton Approved IA 52768 1-800-747-0030 Alan Gickler, President David M. Brown, Chief Engineer F. (Larr Contacts: Vendor Note Machining services. Supplier of solder and flux, silver solder. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Johnson Products Inc. (Frml. Johnson Precision C 149 La Porte Street SAP ID#: 63453 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Arcadia Approved CA 91006 626-445-1411 Sam LaPorte Contacts: Vendor Note CNC Machine Shop Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit INSPECTION SYSTEM REQUIREMENTS MIL-I-45208 K & L Anodizing Corporation SAP ID#: 36652 LMFBM Supplier: Approved for Use: No Status: Yes LMDenver Supplier: No No No Vendor Phone 1200 S. Victory BoulevaBurbank Approved No CA Contacts: 91502 818-845-7251 Don Leiker, President Troy Slavin, QC Manager Dana Schlump Vendor Note Anodize, Chem-film, passivation, silkscreeen, laser part marking. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ANODIZING - ALUMINUM MIL-A-8625 MIL-A-8625 MIL-A-8625 TYPE III - HARD TYPE II-SULF (DY/UDY) (1) TYPE I-CHRMIC(DY/UDY) No No No No No No No No No Yes No No No No No CHEMICAL PROCESSING AC7108 EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS Friday, January 10, 2014 Page 69 of 146 MIL-I-45208A No No No AC7004 No No No No No No No No No NADCAP- Standard Requirements PASSIVATION QQ-P-35 TYPE II PASSIVATION/CLEANING MIL-S-5002 K. R. Anderson, Inc. SAP ID#: 36653 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 18330 Sutter Blvd. Approved Yes Vendor Phone Morgan Hill CA 95037 408-825-1800 Dennis Wagner, President/Johnny, Manager. Contacts: Vendor Note Procurement of Chemicals, Sealants & Adhesives. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No MIL-I-43553 No Yes No ISO-9001:2000 No Yes No INK, MARKING, EPOXY QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Kerley Corporation SAP ID#: 36662 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 3508 Ocean View Blvd. Glendale Approved CA Contacts: 91208 818-248-4783 Sam Richetts (sales/admin) Ruth Berry (main contact) Gary Jo Vendor Note Supplier of equipment for inspection and calibration. Metrology Distributor of high precision inspection equip. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 70 of 146 No Kitch Engineering SAP ID#: 36664 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 12455 Branford St., Uni Arleta Approved CA Yes 91331 818-897-7133 Steve Kitching, President, Patrora J. Brown, QA Manager Contacts: Vendor Note Manufacture machine parts. CNC milling, CNC turning Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No No Yes No No No Yes Yes No No ANSI/ASQC Z1.9-1993 No Yes No MIL-STD-105 No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING CNC MILLING CNC TURNING SMPLG PROC. & TBLS BY VAR. FOR % NON-CONF. SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. L & A Plastic Molding, Inc. (LaContainer) SAP ID#: 36668 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 24895 E. La Palma Ave Yorba Linda Approved CA Contacts: 92887 714-694-0202 Jeff, Quality Mgr. Vendor Note Plastic molding Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No PLASTIC MOLDED OR EXTR. GOODS Friday, January 10, 2014 Page 71 of 146 L. A. Gauge Co., Inc. (wasTriumph Precision) SAP ID#: 36965 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 7440 San Fernando Ro Sun Valley Approved Yes CA 91352 818-767-7193 Guillermo Olmedo, QA Manager Contacts: Vendor Note Mfr. And supplier of utlra-precision machine components/fabricator of exotic materials such as Beryllium, AlBeMet, Berylcast, Inconel, and many other materials. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes No MIL-STD-45662A No Yes No MIL-I-45208A No Yes No No Yes No ISO 10012-1/17025 No Yes No ISO9001:2008 No Yes No ISO-9001:2000 No Yes No MIL-Q-9858A No Yes No ISO-9002 No Yes No ANSI/ASQC Z1.4-1993 No Yes No CALIBRATION SYSTEMS REQUIREMENTS INSPECTION SYSTEM REQUIREMENTS MACHINING EXOTIC MATERIAL PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. Quality System QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. QUALITY SYSTEM REQUIREMENTS QUALITY SYSTEMS FOR PRODUCTION SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. L.C. Miller Company SAP ID#: 48566 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 717 Monterey Pass Roa Monterey Park Approved CA Contacts: 91754 323-268-3611 Dave Vito Vendor Note Flow switches, induction heating equipment, vacumn tweezers, services machining metal, EDM, ultrasonic machining, annealingm brazing, soldering. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Basic supplier requirements No Friday, January 10, 2014 No Page 72 of 146 No Lee Spring Co. SAP ID#: 140 58th Street 25619 LMFBM Supplier: Approved for Use: Status: Yes LMDenver Supplier: No No Vendor Phone Brooklyn Approved NY 11220 718-236-2222 Peter Giosa, President / Elvis Jarvis, QA Manager Rita & Cindy, Contacts: Vendor Note ISO 9001-2000 for design, manufacture and distribution. Manufacturer of springs and wire forms. Special processes in-house; passivation, heat treating and plating. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM MIL-687/AMS 2750 No No No ISO9001:2008 No No No Quality System LOOS & COMPANY (Cableware Division) SAP ID#: 36684 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 901 Industrial Blvd. Vendor Phone Naples Approved FL 34104 800-321-5667 Anthony Naines President, Dan Broughton Director QA Contacts: Vendor Note Mfr and Dist of cable hardware, cable products and equipment, cable assemblies and related products. MS, AN and NAS hardware and related equipment. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No AS9100 No No No ISO-9001:2000 No No No ASTM A 967 No No No Model for Aerospace Quality Assurance Systems QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Surface Treatment/Passivation Loutech SAP ID#: 88908 LMFBM Supplier: 13810 Mountain Ave No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Chino Approved CA Contacts: 91710 909-532-2960 Elvia Wise Vendor Note Process Friday, January 10, 2014 Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Page 73 of 146 Quality System ISO9001:2008 LTD Technology (formerly: So. Coast Mfg. Co.) SAP ID#: 36686 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No No Vendor Phone 2630 Lavery Court Suit Newbury Park Approved No Ca 91320 805-480-1886 Lonny Deboisblanc, President Contacts: Vendor Note Passivation, Chem Film, Machining, Electronic Assys, Wire Harnesses. Chromate conversion coating (chem-film) of aluminum Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit MIL-C-45662 No No No MIL-STD-45662A No No No No No No No No No No No No MIL-S-5002 No No No MIL-STD-105 No No No CALIBRATION SYSTEMS REQUIREMENTS EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208 PASSIVATION QQ-P-35 TYPE II PASSIVATION/CLEANING SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. M and M Fasteners, Inc. SAP ID#: 58160 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 7668 SAN FERNANDO SUN VALLEY Approved CA Contacts: 91352 818-767-8833 Paul Jensen VP CEO, John Cox VP QC Manager Vendor Note Distributor Only Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY REQUIREMENTS No No No No No No Quality System ISO9001:2000 Friday, January 10, 2014 Page 74 of 146 Macartney Inc. (previously M.J. Stewart) SAP ID#: 46977 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 2901 W. San Houston P Houston Approved TX 77043 713-266-7575 Lars Hansen (president), Jacobo Aguilar, Kori Burnett Contacts: Vendor Note Connectors, Rov's, Winch, Cable Terminations, Fiberoptic (optilinks) Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Mach-Dynamics SAP ID#: 36688 LMFBM Supplier: No No 494 Main Street Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone Susquehanna Approved No PA 18847 775-278-9308 Contacts: Vendor Note Purchasing grease Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No March Electronics SAP ID#: 36690 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 25 Feldland St. NY Contacts: No Vendor Phone Bohemia Approved No 11716 631-563-6000 John Villardi, PRESIDENT Vendor Note Representative for our products to our customers. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit MISCELLANEOUS ITEMS/SERVICES No No No No No No No No No Quality System ISO9001:2000 AS9100C Friday, January 10, 2014 Page 75 of 146 Markem-Imaje Corporation SAP ID#: 6926 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 150 Congress Street Vendor Phone Keene Approved NH Yes 03431 800-258-5356 Steve Buswell Quality Engineer Contacts: Vendor Note Design, manufacture, distribution and service of industrial In-Plant Printing Systems and supplies used to identify and decorate products of industry. Please look at Markem-Image Standard Ink Policy on file for more standard processes they meet. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No No Yes No INK, MARKING, EPOXY BASE MIL-I-43553 MISCELLANEOUS ITEMS/SERVICES QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Master Bond,Inc. SAP ID#: 74947 LMFBM Supplier: No 154 Hobart St. Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Hackensack Approved NJ 07601 201-343-8983 Contacts: Vendor Note This vendor supplies "sole source" age sensetive Epoxy Adhesive. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Cytotoxicity Requirement ISO 10993-5 No No No No No No EATON Camarillo Basic Supplier Quality Requirements Maya Manufacturing SAP ID#: 36696 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 43214 Blackdeer Loop Temecula Approved Yes CA Contacts: 92592 951-296-3020 George Maya, Owner/Isaac Maya, Quality Control Vendor Note Metal stamping. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements Friday, January 10, 2014 Page 76 of 146 No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A McDonald Packaging, Inc. SAP ID#: 36700 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 27601 So. Garnsey St. Santa Ana Approved CA 92707 714-755-3000 Jim McDonald President Miguel Alcala Contacts: Vendor Note Packaging supplies. Corrugated packaging Foam Fabricator and Wood Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No McGee Industries, Inc. SAP ID#: 66746 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 9 Crozerville Road No Vendor Phone Aston Approved No PA 19014 610-459-1890 Gordon White, Tech. Dir./Edward L. McClatchy, Jr., Pres. Contacts: Vendor Note Industrial lubricants and release coatings Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIRMENTS No No No No No No QUALITY SYSTEM REQUIREMENTS ISO 9001:9008 McMaster-Carr Supply Company SAP ID#: 923 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 9630 Norwalk Blvd Approved Yes Vendor Phone Santa Fe Sprin CA Contacts: 90670 562-692-5911 Sanjiv Shah, Sales Vendor Note Distributor of over 480,000 industrial supplies. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 Yes Page 77 of 146 No Metal Plasma Technology SAP ID#: 49268 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 27525 Newhall Ranch RValencia Approved CA 91354 661-257-1933 Andrew R. Velasco, QA Manager, A.B. Kassir, General Manage Contacts: Vendor Note ION/Plasma Nitriding Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No AC7004 Yes No No AC7101/5 Yes No No AC7101/4 Yes No No AC7102/4 Yes No No AC7102 Yes No No NADCAP - AQS - Inspection and Test Quality System NADCAP - Materials Testing Laboratories - Hardness NADCAP - Materials Testing Laboratories - Metallography NADCAP - Nitriding NADCAP Heat Treating Metal Surfaces Inc. SAP ID#: 36706 LMFBM Supplier: 6060 Shull Street Approved for Use: No Status: Yes LMDenver Supplier: Yes Vendor Phone Bell Gardens Approved CA Contacts: 90201 562-927-1331 Donald Brown, President/ Paul Horgan, Quality Director/ Angel Vendor Note General plating services. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ACID PICKLE No No Yes No No No No Yes Yes No No Yes Yes Yes No No Yes Yes Yes No Yes ALUMINUM CONVERSION COATING MIL-C-5541 WS 9030 GEN.C/FLM, CLR & COLR CHEMFILM TYPE I (LMSC) APPL. CHEMFILM - BERYLLIUM WS 11753 CADMIUM PLATING QQ-P-416 QQ-P-416 TYPE I, II, III TYPE I,II COPPER PLATING MIL-C-14550 Friday, January 10, 2014 Page 78 of 146 AMS 2418 Yes No Yes No No Yes No No Yes Yes No Yes No No Yes AS9100 No No Yes AC7108 Yes No Yes EATON Camarillo Basic Supplier Quality Requirements ELECTRO PLSHNG CRS WS 11745 GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE I, CL 1 LIQUID HONING Model for Aerospace Quality Assurance Systems NADCAP - Chemical Processing NICKEL PLATING MIL-C-26074 QQ-N-290 ELECTROLESS ELECTRO DEPOSITED Yes Yes No No Yes Yes QQ-P-35 TYPE II Yes No Yes No No Yes Yes Yes No No Yes Yes No No Yes Yes No Yes No No Yes PASSIVATION PASSIVATION/CLEANING MIL-S-5002 PRECIOUS METAL PLATING MIL-R-46085 QQ-S-365 RHODIUM SILVER QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 TIN PLATING MIL-T-10727 TYPE I VAPOR HONING Metallurgical Processing, Inc. SAP ID#: 100219 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 68 Arthur St. Vendor Phone New Britain Approved CT Contacts: 06050 Terry Chadwick Vendor Note Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Nitriding AMS 2759/6 No No No AC7102/1 No No No NADCAP - Brazing Friday, January 10, 2014 Page 79 of 146 NADCAP - Carbuizing AC7102/3 AC7102/3 No No No No No No AC7101/2 No No No AC7101/4 AC7101/4 No No No No No No AC7101/7 No No No AC7102/2 No No No AC7102 No No No ISO9001:2008 No No No NADCAP - Materials Testing Laboratories - Chemical Testi NADCAP - Materials Testing Laboratories - Metallography NADCAP - Mechanical Testing Specimen Preparation NADCAP Aluminum Heat Treating NADCAP Heat Treating Quality System Metalmart International, Inc. SAP ID#: 36705 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 5828 Smithway St. Approved Yes Vendor Phone Commerce CA Contacts: 90040 562-692-9081 Pat Corless, QM Vendor Note All hard to find material. Largest stock magnesium distributor in the world. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No Yes No ISO9001:2008 No Yes No AS9100C No Yes No MIL-STD-105 ANSI/ASQC Z1.4-1993 No No Yes Yes No No Quality System SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Friday, January 10, 2014 Page 80 of 146 Metals Testing Co. SAP ID#: C31012D Approved for Use: Yes Status: LMFBM Supplier: No LMDenver Supplier: No 80 Kimberly Dr Vendor Phone South Windsor Approved CT 06074 860-289-8225 Used by Continental Machine Tool Co., Inc. Contacts: Vendor Note Inspection and Testing & Chemical Processing Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Chemical Processing AC7180 No No No AC 7108/2 No No No AC7004 Yes No No AC7114 No No No AS7003 No No No Etching process NADCAP - AQS - Inspection and Test Quality System NADCAP NonDestructive Testing NADCAP Quality System Metco Fourslide Manufacturing Inc. SAP ID#: 36708 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 17540 S. Denver Ave. Vendor Phone Gardena Approved CA 90248 310-516-6547 Dana VP of Sales Contacts: dana@metcofourslide.com Vendor Note Precision Metal Stampings, Wire Forms, and Assemblies Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Micro Quality Calibration SAP ID#: 36709 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No 20743 Marilla St. CA Contacts: No Vendor Phone Chatsworth Approved No 91311 818-701-4969 Kanie, Owner & President Vendor Note Calibration. Process Spec. ISO 17025:2005 NAPCAP LMFBM LM_Denver Type/Class/Limit No No Calibration Friday, January 10, 2014 Page 81 of 146 No A2LA No No No ISO9001:2008 No No No Quality System MIL (Magnetic Inspection Laboratory SAP ID#: 59 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1401 Greenleaf Vendor Phone Elk Grove Approved IL 60007 847-437-4488 Contacts: Vendor Note Chemical Processing (Use by Smalley Steel Ring Company) NADCAP Approvals (see listing in file AMS-2700 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A MIL-A-8625 No No No MIL-A-63576 No No No AMS 2471 AMS 2469 AMS 2468 AMS 2472 No No No No No No No No No No No No AMS 2400 AMS 2400 No No No No No No ASTM B 600 No No No MIL-C-5541 No No No MIL-DTL-5541 No No No MIL-C-81769 MIL-C-81769 No No No No No No AMS 2486 AMS 2473 No No No No No No AC7110/1 No No No AC7108 AS7003 AC7108 No No No No No No No No No Anodizing Cadmium Plating Chemical Cleaning CHEMICAL CONVERSION COATINGS ON ALUMINUM A CHEMICAL CONVERSION MATERIALS Chemical Milling of Metals, Specification for Conversion/Phosphate Coatings NADCAP - Brazing (Torch/Induction) NADCAP - Chemical Processing Friday, January 10, 2014 Page 82 of 146 NADCAP - Etch Processes (Blue Etch Anodize, Local, Mac AC7108/2 No No No AC7110/5 No No No AC7108/3 No No No AC7110/12 No No No AMS-QQ-P-35 QQ-P-35 No No No No No No AS9100C ISO9001:2008 No No No No No No ASTM A 380 AMS 2700 No No No No No No NADCAP - Fusion Welding NADCAP - Surface Preparation Prior to Metal Bond NADCAP - Welder/Welding Operator Qualification Passivation Treatments for Corrosion Resistant Steel Quality System Surface Treatment/Passivation Miles Chemical Co., Inc. SAP ID#: 36716 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 12801 Rangooa St. Vendor Phone Arleta Approved CA 91331 818-504-3355 Anthony Miles, President, Tony Rossi, Operation Director Contacts: Vendor Note Chemical and waste hauling, MISCELLANEOUS ITEMS / SERVICES Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No Quality System ISO 1401:2004 Miller-Stephenson Chemical Co. (2) SAP ID#: 16485 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 55 Backus Ave Vendor Phone Danbury Approved CT Contacts: 06810 (203)743-4447 Joanna Saffo, QC Mgr./ Moverad Fahmi, Gen. Mgr. Vendor Note Specialty chemicals packaged in aerosol & non-arosol Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Friday, January 10, 2014 Page 83 of 146 No ISO-9001:2000 Miller-Stephenson Chemical Company SAP ID#: 106806 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No 12261 Foothill Blvd. No Vendor Phone Sylmar Approved CA Yes No 91342 818-896-4714 Mr. Stephenson, President/ Joanna Saffo, Q.A. Contacts: Vendor Note Specialty chemicals.Re-packager for Momentive Specialty Chemicals' resins and curing agents and DuPont's Krytox lubricants, Formulate products and package in aerosol and non-aerosol. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Cooper BASIC SUPPLIER QUALITY REQUIREMENTS No Mindrum Precision Inc. SAP ID#: 36721 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 10,000 Fourth Street No Vendor Phone Rancho Cucam Approved Yes CA 91730 909-989-1728 Diane Mindrum President, Chris Ayers Quality Control Manager Contacts: Vendor Note precision machining & polishing of glass quartz, ceramic & metals. Bonded filter assemblies, optical assemblies, eye safe laser assemblies measuring & mapping of large cavities. Glass blowing, flow cells, medical devices lightweighting or large mirrors. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit COOPER Basic Supplier Requirements No No No No No No Quality System ISO9001:2000 Molding Corporation Of America SAP ID#: 36726 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 10349 Norris Ave. Approved Yes Vendor Phone Pacoima CA Contacts: 91331 818-890-7877 Mark Hurley, President & QA Manager Vendor Note Plastic injection molding. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Friday, January 10, 2014 Page 84 of 146 Montclair Bronze, Inc. SAP ID#: 36728 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 5821 State Street Vendor Phone Montclair Approved CA 91763 909-986-2664 Contacts: Vendor Note Distributor of metal alloys. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No FORGINGS & EXTRUSIONS INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Motion Industries, Inc. SAP ID#: 36729 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 858 East 5th Street Vendor Phone Oxnard Approved CA 93030 805-487-4877 Duane Salka, QM Contacts: Vendor Note Dist. Industrial bearings and other power transmission components. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 MS Inserts and Fasteners Corp. SAP ID#: 36732 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 24310 Garnier St Vendor Phone Torrance Approved CA Contacts: 90505 310-539-1530 Don Marston, QA Mgr.; Bob Duncan Vice President Vendor Note MS Inserts & Fasteners Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System No No No AS9104A No No No Aerospace Quality Management System Certification Model for Aerospace Quality Assurance Systems Friday, January 10, 2014 Page 85 of 146 AS9100 No No No ISO-9001:2000 No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. MSC Industrial Supply Co. SAP ID#: 106894 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 75 Maxess Road Vendor Phone Melville Approved NY 11747 800-645-7270 trondlem@mscdirect.com Contacts: Vendor Note Industrial, MRO and Metalworking Supplies Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Multi-Seals, Inc. SAP ID#: 36733 LMFBM Supplier: 540 N. Main Street Approved for Use: Status: Yes LMDenver Supplier: No No No Vendor Phone Manchester Approved No CT 06040 860-643-7188 Bert Anderson, V.P. Quality, Dave Anderson, President Contacts: Vendor Note Epoxy preforms. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 MURRAY-BENJAMIN ELECTRIC CO. SAP ID#: 5500 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 397 WEST AVENUE Vendor Phone STAMFORD Approved CT 06902 203-705-2100 Contacts: Vendor Note Cable Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 86 of 146 No National Magnetics Group, Inc. SAP ID#: 36735 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1210 Win Drive Vendor Phone Bethlehem Approved PA 18017 610-867-7600 Paul Oberbeck Pres./Goutam Das QA Mgr Contacts: Vendor Note Magentic materials: ferrites, magnets, iron cores, garnets, dielectrics. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements FERROUS METALS National Technical Systems SAP ID#: 36570 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 7829 Industry Avenue Pico Rivera Approved CA 90660 562-949-2727 Scott Miller, Lab Mgr. / Don Moshter Jr., Q.A.M. Contacts: Vendor Note Testing and calibration Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No AS9100 No No No ISO-9001:2000 No No No EATON Camarillo Basic Supplier Quality Requirements Model for Aerospace Quality Assurance Systems QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. National Technical Systems (1) SAP ID#: 36738 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 5320 W 104th Street Vendor Phone Los Angeles Approved CA Contacts: 90045-6099 310-348-0900 Don Hedley, Quality Rep/ Dan Cannon, Dir. Of Quality Vendor Note Approved for Acoudtics and Vibration Testing; Mechanical Testing; Electrical Testing and Thermal Testing. See file for complete details. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Accredited Testing Facility Friday, January 10, 2014 Page 87 of 146 A2LA No No No ANSI/NCSL Z540-1 No No No MIL-STD-45662A No No No No No No ISO 10012-1/17025 No No No ANSI/ASQC Z1.4-1993 No No No CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. CALIBRATION SYSTEMS REQUIREMENTS COOPER BASIC SUPPLIER QUALITY REQUIREMENTS PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. National Technical Systems (2) SAP ID#: 36922 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 15062 Bolsa Chica St. Huntington Bea Approved CA Contacts: 92649 714-892-1961 Daniel Becerra, Quality Manager; Mark Jonus, Senior V.P. Vendor Note Metallurgical Evaluation, Chemical Analysis, Mechanical Testing, Dimensional Inspection Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Audit Criteria for Material Testing Laboratories AC7101/1 No No No ISO/IEC 17025-2005 Yes No No AC7101/3 No No No AC7101/6 No No No AC7101/11 No No No AC7101/5 No No No AC7101/9 No No No AC7101/7 No No No AC7101/4 No No No AC7101/2 No No No General Requirements for the Competence of Testing Material Test Laboratories for Mechanical Testing Material Testing for Corrosion Material Testing for Fastener Material Testing for Hardness Material Testing for Heat Treating Material Testing for Mechanical Testing Specimen P Material Testing for Metallography and Microhardne Materials Test Laboratories for Chemical Testing Friday, January 10, 2014 Page 88 of 146 National Technical Systems (3) SAP ID#: 36739 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 1536 East Valencia DrivFullerton Approved CA 92831 714-879-6110 Betty Matteson, QAM betty.matteson@nts.com Contacts: Vendor Note Product safety, fiber optic testing & engineering services Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No A2LA No No No MIL-I-45208A No No No A2LA No No No ISO 10012-1/17025 No No No ISO-9001:2000 No No No A2LA No No No Electrical Testing INSPECTION SYSTEM REQUIREMENTS Mechanical Testing PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Thermal Testing Nelson Nameplate SAP ID#: 36744 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 2800 W. Casitas Avenu Los Angeles Approved Yes CA Contacts: 90039 323-663-3971 David Lazier, Co-President/Thomas Cassutt, Co-President/Hild Vendor Note Electronic membrane switches, panels, plates, graphic overlays. Anodizing, nameplates lenses, labels, membrane Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit No Yes No MIL-A-8625 No Yes No ANSI/NCSL Z540-1 No Yes No AS9100 No Yes No AC7004 No Yes No ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. Model for Aerospace Quality Assurance Systems NADCAP- Standard Requirements Friday, January 10, 2014 Page 89 of 146 SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Northwest Spring SAP ID#: 48551 LMFBM Supplier: No No Approved No Vendor Phone 11973 SW Herman Rd. Tualatan Approved for Use: Yes Status: LMDenver Supplier: No Yes OR 97062 971-224-2180 Don Lolly, Q.M./Dan Anderson, Yvonne Daves, Don Lolly, Gen Contacts: Vendor Note Manufacturing of precision coiled and flat springs, wire forms, metal stampings and associated assemblies. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No No No No No No Quality System ISO9001:2000 Nusil Technology SAP ID#: 36756 LMFBM Supplier: 1050 Cindy Lane Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Carpinteria Approved CA Yes 93013 805-684-8780 Tom Danigan, VP of QA Regulatory Affairs Contacts: Lisa Hernandez, Vendor Note Design, development, and formulation and production of advanced silicone materials for the healthcare, aerospace and manufacturing industries. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No MIL-I-45208A No Yes No ISO-9001:2000 No Yes No INSPECTION SYSTEM REQUIREMENTS QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Nylok Fastener Corporation SAP ID#: 36759 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 313 N. Euclid Way Approved Yes Vendor Phone Anaheim CA Contacts: 92801 714-635-3993 Hans Dorflinger, General Manager /Maynard Axvis, QA Manage Vendor Note Fasteners, Self-locking. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS Friday, January 10, 2014 Page 90 of 146 MIL-STD-45662A No Yes No No Yes No No Yes No ISO-9001:2000 No Yes No MIL-STD-105 No Yes No EATON Camarillo Basic Supplier Quality Requirements FASTENERS PROCESSING QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Omikron Engineering SAP ID#: 36764 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 18334 Eddy Street Vendor Phone Northridge Approved CA 91325-3314 818-349-6751 Frank Krestyn President/Owner, Anthony Trovato QA Manager Contacts: Vendor Note Small precision experimental production (CNC) Maching, Turning, Milling Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No MIL-I-45208A No No No ISO9001:2000 No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS Quality System Omni Metal Finishing, Inc. SAP ID#: 36765 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: Yes Vendor Phone 11665 Coley River Circl Fountain Valley Approved Yes CA Contacts: 92708 714-979-9414 Victor M. Salazar, President Abel Salazar, QA Manager Vendor Note Metal finishing (note: codes 3.01, 3.02, 3.04, 3.06, 3.24, 3.38 are also L/M Denver approved) Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR Yes Yes Yes MIL-A-8625 AMS 2468 MIL-A-8625 (1) TYPE I-CHRMIC(DY/UDY) HARD TYPE II-SULF (DY/UDY) Yes Yes Yes Yes Yes Yes Yes Yes Yes ANODIZING - ALUMINUM Friday, January 10, 2014 Page 91 of 146 MIL-A-8625 TYPE III - HARD Yes Yes Yes QQ-P-416 QQ-P-416 TYPE I,II TYPE I, II, III Yes Yes Yes Yes Yes Yes DOD-P-16232 TYPE M, CLASS II No Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes AS9100 No Yes Yes AC7108 Yes Yes Yes AC7108/2 Yes Yes Yes AC7108/1 Yes Yes Yes AC7114 Yes Yes Yes AC7114/2 Yes Yes Yes AC7114/1 Yes Yes Yes CADMIUM PLATING Conversion/Phosphate Coating COPPER PLATING MIL-C-14550 EATON Camarillo Basic Supplier Quality Requirements LUBRICANT, SOLID FILM, HEAT CURED, CORROSION I MIL-L-46010 TYPE I, II Model for Aerospace Quality Assurance Systems NADCAP - Chemical Processing NADCAP - Etch Processes (Blue Etch Anodize, Local, Mac NADCAP - Painting and Dry Film Coatings NADCAP NonDestructive Testing NADCAP NonDestructive Testing - Magnetic Particle NADCAP NonDestructive Testing - Penetrant NICKEL PLATING MIL-C-26074 QQ-N-290 ELECTROLESS ELECTRO DEPOSITED Yes Yes Yes Yes Yes Yes QQ-P-35 TYPE II Yes Yes Yes QQ-P-35 No Yes Yes (MIL-I-6866) MIL-STD-686 No Yes Yes No Yes Yes Yes Yes Yes No Yes Yes PASSIVATION Passivation Treatments for Corrosion Resistant Steel PENETRANT INSPECTION SAND BLASTING TIN PLATING MIL-T-10727 TYPE I VAPOR HONING Friday, January 10, 2014 Page 92 of 146 One Way Industrial Supply, Inc. SAP ID#: 36767 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 302 Pine Ave Vendor Phone Goleta Approved CA 93117 805-964-6749 Robert Briggs Contacts: Vendor Note Cutting tools and tools for manufacturing machine shop supplies. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Onvaco(U.S.A) Inc. SAP ID#: 65055 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 6773 Sierra Ct., Ste C No Vendor Phone Dublin Approved (Limited) No CA 94568 925-479-0045 Philip Lan [onvaco@earthlink.net] Contacts: Vendor Note Auto-lathe products,CNC lathe products,Casting/Molding products, Rubber components. Email onvaco@earthlink.net gwen.lee@earthlink.netMachined components, screw machin, plastic, rubber, casting, Components Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit SAMPLING PROCEDURES AND TABLES MIL-STD-105 Optel-Matic, Inc. SAP ID#: 6801 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Approved CA Contacts: No Vendor Phone 11221 Thienes Avenue So. El Monte Yes No 91733 626-444-2671 Max Buettika, President/Elizabeth Karpynetz QA Mgr. Vendor Note Material fabrication. Pins, Contacts, Sockets precision parts. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No SWISS SCREW MACHINE No Yes No TYPE II No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING PASSIVATION QQ-P-35 Friday, January 10, 2014 Page 93 of 146 PASSIVATION/CLEANING MIL-S-5002 Orange County Nameplate Co., Inc. SAP ID#: 36770 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No 13201 Arctic Circle No Vendor Phone Santa Fe Sprin Approved CA Yes Yes 90670 562-921-7795 Elias Redriguez, President/Gilbert Ochoa, QA Manager Contacts: Vendor Note Chemical etch nameplates, scotchcals, foilplates, embossing, engraving, hot stamping, panels & dials, laxan overlays, metal stamping, roll labels, barcoding, membrane switches. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes No MIL-STD-45662A No Yes No No Yes No MIL-I-45208A No Yes No AS9100 No Yes No CALIBRATION SYSTEMS REQUIREMENTS EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS Model for Aerospace Quality Assurance Systems O-Rings, Inc. SAP ID#: 36772 LMFBM Supplier: 3311 Pepper Ave Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone Los Angeles CA Contacts: 90065 323-343-9500 Daniel Lopez (QM) dlopez@oringusa.com Mayra Castaneda ( Vendor Note distributor of rubber o-rings, gaskets, plugs and grips. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes No No Yes No No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements GASKETS INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Friday, January 10, 2014 Page 94 of 146 Orion Precision Industries, Inc. SAP ID#: 43984 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 8 Veronica Avenue Vendor Phone Somerset Approved NJ 08873-3417 732-247-9704 Dean Russell, VP of Operation/Quality; John Sztankovitz, Presi Contacts: Vendor Note Manufacturing of Contacts Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Pacific Magnetic & Penetrant Co., Inc. SAP ID#: 36778 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: Yes No Approved Ca Contacts: No Vendor Phone 6837 Farmdale Avenue North Hollywoo Yes No 91605 818-765-7266 Erik B. Anderson, President/John H. Smith, QA Mgr. Vendor Note Magnetic particle inspection (Wet Method) IAW ASTM E 1444 Liquid penetrant inspection IAW ASTM E 1417 Passivation Per AMS QQP 35 Salt-Fog, High Humidity, Alu, oxide & glass bead blasting. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes Yes MIL-STD-45662A No Yes Yes AC7108 No Yes Yes No Yes Yes MIL-I-45208A No Yes Yes AC7004 No Yes Yes AC7114/2 No Yes Yes AC7114 Yes Yes Yes AC7114/1 No Yes Yes No Yes Yes CALIBRATION SYSTEMS REQUIREMENTS CHEMICAL PROCESSING EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS NADCAP- Standard Requirements NON DESTRUCTIVE TESTIN MAGNETIC PARTICLE Non Destructive Testing NON-DESTRUCTIVE TESTING PENETRANT PASSIVATION QQ-P-35 Friday, January 10, 2014 TYPE II Page 95 of 146 QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A No Yes Yes ANSI/ASQC Z1.9-1993 No Yes Yes ANSI/ASQC Z1.4-1993 MIL-STD-105 No No Yes Yes Yes Yes ASTM-E1417 No Yes Yes SMPLG PROC. & TBLS BY VAR. FOR % NON-CONF. SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Standard Practice for Liquid Penetrant Examination Pacific Metal Stampings SAP ID#: 36779 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 28415 W. Witherspoon Valencia Approved CA Yes 91355 661-257-7656 Donald Schlotfelt President, Brian Schlotfelt VP Contacts: Vendor Note Metal stampings.PUNCH PRESS Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A PUNCH PRESS Pacific Testing Laboratories SAP ID#: 36782 LMFBM Supplier: Approved for Use: Yes Status: Yes LMDenver Supplier: No Vendor Phone 24950 Avenue Tibbitts Valencia Approved Ca Contacts: 91355 661-257-1437 Frank Barrett Q.C. Manager, Michael C. Shin Lab Director Vendor Note Metallurgical testing: Electrical, mechanical, metallurgical, physical, chemistry, thermal, analytical tests. Alloy Identification, spectro photography, wet chemistry analysis, salt spray, mercury analysis, solderability, organic contamination, x-ray rad Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ANSI/NCSL Z540-1-1994 No Yes No ANSI/NCSL Z540-1 No Yes No MIL-I-45208A No Yes No CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. INSPECTION SYSTEM REQUIREMENTS Friday, January 10, 2014 Page 96 of 146 Pei-Genesis SAP ID#: 43068 LMFBM Supplier: Vendor Phone 3951 South Plaza Drive.Santa Anna No Approved for Use: Yes Status: LMDenver Supplier: No Approved CA 92704 800-746-2642 Contacts: Vendor Note Electronic distributor in passive/electromechanical components specializing in connector assembly. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No Electronic Distributor in Passive/Electromechanical Compo ISO-9001:2008 Pennoyer-Dodge Co. SAP ID#: 36795 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 6650 San Fernando Ro Glendale Approved CA 91201 818-547-2100 Hazel Dodge, President Robert Dodge, VP Quality Adminstratio Contacts: Vendor Note Gages Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements GAGES PIC DESIGN CORP. SAP ID#: 37251 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 86 Benson Rd. PO BOX MIDDLEBURY Approved CT Contacts: 06762 203-758-8272 Tom Crainer (VP/GM) Mark Valentine (QM) Vendor Note Gears, Pulleys, Linear Motion Systems Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS Friday, January 10, 2014 Page 97 of 146 MIL-I-45208A Pico Corporation SAP ID#: 36799 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Approved No Vendor Phone 444 Constitution Avenu Camarillo CA Yes No 93012 805-388-5510 Bill Green CEO Gil Struble V. Pres, Quality Manager Mark Gree Contacts: Vendor Note Crimping tools, Contact installing tools, Removal tools. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CRIMPING INS./REMOVAL TOOLS No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements Pierce Aluminum Co. Inc. SAP ID#: 971 LMFBM Supplier: Approved for Use: Yes Status: Yes LMDenver Supplier: No 34 Forge Park Vendor Phone Franklin Approved MA 02038 GARY Contacts: 800-336-1358 Jeff Pierce, QA Manager Vendor Note Rawbar material. Site Name: Kent Address: 1208 4th Ave. North, Kent, WA 98032 Phone: 253-239-6181 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No MISCELLANEOUS ITEMS/SERVICES Quality System ISO9001:2000 Pittsburgh Wire & Cable SAP ID#: 47527 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 210 Bilmar Dr. Vendor Phone Pittsburgh Approved PA Contacts: 15205 412-920-7190 Aaron Colgan aaronc@pittsburghwire.com Vendor Note Distributor of electrical wire, cable and related products. Www.pittsburghwire.com Process Friday, January 10, 2014 Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Page 98 of 146 Quality System ISO9001:2008 Plateronics SAP ID#: 48139 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Approved CA Contacts: No Vendor Phone 9164 Independence AveChatsworth No No 91331 818-341-2191 QC@plateronics.com Maria Perez Vendor Note Anodize, Passivation, Chemical Film, Copper, Gold, Nickel, Silver ,Tin, Zinc Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Anodizing MIL-A-63576 No No No MIL-DTL-5541 No No No AMS-C-26074 No No No MIL-C-14550 No No No MIL-G-45204 No No No MIL-P-27418 No No No AMS-QQ-P-35 No No No AMS2420 No No No ISO9001:2008 No No No AS9100B No No No QQ-S-365 No No No MIL-T-10727 No No No ASTM-B633 No No No CHEMICAL CONVERSION MATERIALS COATINGS, ELECTROLESS NICKEL COPPER PLATE, ELECTRODEPOSITED GOLD PLATE, ELECTRODEPOSITED Nickel Plating Passivation Treatments for Corrosion Resistant Steel PLATING ON ALUMINUM Quality System Silver Plating Tin Plating Zinc Plating Friday, January 10, 2014 Page 99 of 146 Port Plastics, Inc. SAP ID#: 23583 LMFBM Supplier: No 15317 Don Julian Rd Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone City Of Industry Approved CA 91745 626-333-7678 Cameron Caudill General Manager Contacts: Vendor Note Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit ACETAL (POM) MOLDING AND EXTRUSION MATERIALS ASTM-D4181 No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements PLASTIC MOLDED OR EXTR. GOODS Powell Electronics SAP ID#: 36809 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 200 Commodore Drive Logan Townshi Approved NJ 08085 856-241-5635 Ernest Schilling President, Barbara Pescatore Quality Manager Contacts: Vendor Note Various Connector (See Line Card in file) Value Added Distributor of Electrical Connectors and Accessories Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No AS9100 No No No ISO-9001:2000 No No No Model for Aerospace Quality Assurance Systems QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. PRC-DESOTO, INT. (PPG Aerospace) SAP ID#: 16549 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 24811 Avenue Rockefel Valencia Approved Yes CA Contacts: 91355 661-678-4209 Rod Hunter Q.C. Manager Vendor Note Sealants, Adhesives, primers, coatings. ISO 9001:2000 & NADCAP AS7003 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Friday, January 10, 2014 Yes Page 100 of 146 No Quality System ISO9001:2000 Precious Metals Plating Company, Inc. SAP ID#: 36812 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: Yes No CA Contacts: No Vendor Phone 2635 South Orange AveSanta Ana Approved Yes 92707 714-546-6271 Chad Bird, President; Brian Day, QA manager Vendor Note Plating with Gold, Silver, Nickel, Electroless Nickel, Tin & Copper strike. General plating services. Approved by Lockheed Martin for NADCAP AC7004, MIL-G-45204 Gold Plating and AMS2418 Type 1 Copper Plating.ASTM B48801,QQ-S-365D,ASTM B700-08,AMS2410K,QQ-N-290A,AMS-QQ-N290B,ASTM B697-08 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit 5000-80-0033 No No Yes Yes No Yes No No Yes No No Yes Yes Yes Yes Yes No No No No Yes Yes Yes Yes Yes Yes No No Yes Yes Copper Plating AMS 2418 Type 1 MIL-C-14550 EATON Camarillo Basic Supplier Quality Requirements GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 MIL-G-45204 MIL-G-45204 MIL-G-45204 TYPE I, GRADE A TYPE II, CL 2 TYPE I, CL 1 NADCAP - AQS - Inspection and Test Quality System AC7004 AC7004 NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED Yes No Yes AMS 2412 QQ-S-365 AMS 2410 SILVER Yes Yes Yes No No No Yes Yes Yes Silver Plating Friday, January 10, 2014 Page 101 of 146 Precise Aerospace Manufacturing SAP ID#: 36814 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 224 Glider Circle Approved Yes Vendor Phone Corona CA 92880 951-898-0500 Bill Goodman (QM) wgoodman@precisemfg.com Contacts: Vendor Note Injection, transfer, compression molding, machining, mold making ETC. Plating, material processes, passivate, dry lube, heat treat, NDT, penetrant, Eddy current, etc available through approved subcontracted. Injection molding, transfer molding, CNC machining, mechanical and electrical assembly. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No MIL-I-45208A No Yes No AS9100 No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS Model for Aerospace Quality Assurance Systems PLASTIC MOLDED OR EXTR. GOODS Precision Components SAP ID#: 36816 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 4682 Calle Bolera Rd. UCamarillo Approved Yes CA Contacts: 93012 805-383-4484 David Erickson, CEO/ Travis Erickson QA Mgr. Vendor Note Precision machined contacts / components. Sheffield Plating is authorized for use as sub-tier for this supplier for processing per approved survey dated 7/6/09. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No No No No Yes Yes Yes Yes No No No No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING SWISS SCREW MACHINE GENERAL CNC TURNING CONVENTIONAL SCREW MACHININ Friday, January 10, 2014 Page 102 of 146 Preferred Testing SAP ID#: 36820 LMFBM Supplier: Vendor Phone 5148 Commerce, Suite Moorpark Approved for Use: Yes Status: LMDenver Supplier: No Approved CA Yes 93021-7149 805-532-2092 Major Mirza, Lab Director Contacts: Vendor Note Electronic testing, including ionic contamination; destructive & nondestructive; temp. cycling, vibration, humidity, etc. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit MIL-PRF-23377 No Yes No ANSI/NCSL Z540-1 No Yes No MIL-STD-45662A No Yes No No Yes No No Yes No No Yes No No Yes No CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. CALIBRATION SYSTEMS REQUIREMENTS EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MISCELLANEOUS ITEMS/SERVICES SOLDERING NHB 5300.4 Prime Plating SAP ID#: 36822 LMFBM Supplier: 3A-1 11321 Goss St. No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Sun Valley Approved CA Contacts: 91352 818-768-9100 rachell Pfiester (office manager) or Erik Vendor Note Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Aerospace Quality System AS7004 Yes No No AS7003 Yes No No Chemical Processing Friday, January 10, 2014 Page 103 of 146 Principal Manufacturing Corp. SAP ID#: 16554 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 75 Remittance Drive Su Chicago Approved IL 60675 708-223-7226 Contacts: Vendor Note Manufacturer of Fine-Blanking, conventional stamping, insert molding, machining, welding, riveting, grinding, automated and manual assembly, forming, tapping, belt sanding, de-burring and reaming. Process NAPCAP Spec. ISO/TS 16949:2009 ISO 14001:2004 Products Techniques, Inc. SAP ID#: 37060 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No LMFBM LM_Denver Type/Class/Limit No No Approved No No Vendor Phone 3271 South Riverside A Rialto CA Yes No No 92376 909-877-3951 Barry Boden, Q. C. Mgr. Contacts: Vendor Note Mfg. Mil, & Customer 3 pec, Paints, primers, and specialty coatings. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No MIL-I-45208A No Yes No ISO9001:2008 No Yes No INSPECTION SYSTEM REQUIREMENTS Quality System Professional Plastics SAP ID#: 12632 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1810 E. Valencia Dr. Vendor Phone Fullerton, Approved CA Contacts: 92831 714-446-6500 Scott Patten, GM / Vendor Note Plastic sheet, rod, tube and film. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Friday, January 10, 2014 No Page 104 of 146 No Promatic Industries, Inc. SAP ID#: 36832 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 6926 Deering Avenue Vendor Phone Canoga Park Approved CA Yes 91303 818-888-5076 Herman Bloss, President Tom Bloss, QC Manager Contacts: Vendor Note Precision machined parts. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No No Yes No No No Yes Yes No No No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING LATHE TURNING CNC TURNING SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Quality Surveillance Inc. SAP ID#: 36841 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1200 Yarnell Place Vendor Phone Oxnard Approved CA Contacts: 93033 805-240-2448 Fernando Perez, President Check Grethel, Cal Lab Supervisor Vendor Note Calibraton Services Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No No No No No No No No No No CALIBRATION CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A EATON Camarillo Basic Supplier Quality Requirements PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 Friday, January 10, 2014 Page 105 of 146 R & D Welding Company SAP ID#: 44359 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 13112 Saticoy Street Vendor Phone North Hollywoo Approved CA 91605 818-764-4869 Shiu Chandra, Owner & Mgr. Contacts: Vendor Note G&H Basic Vendor Quality Requirements Sheet metal fabrication / certified welding. FSN Wldg Stell & Super Alloys (GTAW) FSN Wldg Alm, Mag, TT & Alm-Brylm (GTAW) Machining Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Cooper Basic Supplier Requirements No R & S Machine Co. SAP ID#: 36843 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 11100 Airport Drive No Vendor Phone Hayden Approved No ID 83835 208-818-2976 Ron McCauley, Pres./Scot McCauley, Gen. Mgr. Contacts: Vendor Note General CNC machining. Billing address 5256 W. Seasons Rd Rath Drum, ID 83858 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A R & S Processing Company SAP ID#: 36844 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 15712 Illinois Ave. Approved Yes Vendor Phone Paramount CA Contacts: 90723 562-531-1403 Karen Kelly, President/Glen Pomrehn, Laboratory Mgr./John S. Vendor Note Custom rubber compounding. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No MISCELLANEOUS ITEMS/SERVICES Quality System Friday, January 10, 2014 Page 106 of 146 ISO9001:2000 R. A. Fischer Mach. Prod. Inc. SAP ID#: 36845 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No Approved No Vendor Phone 10043 Canoga Avenue Chatsworth CA Yes Yes 91311 818-341-3290 Mary Fischer, VP Contacts: Vendor Note Plug grounding rings. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A R. D. Abbott Co., Inc. SAP ID#: 36847 LMFBM Supplier: 12330 McCann Drive Approved for Use: Status: Yes LMDenver Supplier: No No Vendor Phone Santa Fe Sprin Approved CA 90670 562-944-5354 Keith Thomas, President/Tom Martin, Operations Mgr. Contacts: Vendor Note Lord, Chemlok Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No MISCELLANEOUS ITEMS/SERVICES Quality System ISO9001:2008 R. S. Hughes Company Inc. SAP ID#: 36848 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 10639 Glenoaks Blvd. UPacoima Approved Yes CA Contacts: 91331 818 686-9111 Matt Henderson Quality Manager Vendor Note Distributor (Only) of adhesives, abrasives, electrical, safety, static control, tapes (pressure sensitive). Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC SUPPLIER QUALITY REQUIREMENTS No Yes Adhesive Friday, January 10, 2014 Page 107 of 146 No WS17656A No Yes No 999-164 No Yes No SILICONE ADHESIVE Rakar, Inc. SAP ID#: 36851 LMFBM Supplier: Vendor Phone 1700 Emerson Avenue Oxnard Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes CA 93033 805-487-2721 Jeff Babb, Quality Contacts: Vendor Note Manufacturer of Molds & Molded plastics. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No 999-068 No Yes No MIL-I-45208A No Yes No No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements EPOXY MOLDING COMPOUND INSPECTION SYSTEM REQUIREMENTS PLASTIC MOLDED OR EXTR. GOODS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 RDS Wire&Cable, Inc. SAP ID#: 2877 LMFBM Supplier: Approved for Use: No Status: Yes LMDenver Supplier: No Vendor Phone 225 E. Gardena Boulev Gardena Approved CA Contacts: 90248 310-323-7131 Jon Stott, President/Buddy Luna, V.P. Vendor Note MIL-W-22759/32-24 WIRE; The warehousing, distribution and value added processes of electrical wire cables and tubings. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements Model for Aerospace Quality Assurance Systems AS9100 Friday, January 10, 2014 Page 108 of 146 Reltek SAP ID#: 36861 LMFBM Supplier: 2345 Circadian Way No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Santa Rosa Approved CA 95407 707-284-8808 Robert E. Lindberg, President / Amy Contacts: Vendor Note Adhesives, sealants and coatings. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit ADHESIVE No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements PRIMER 999-241 Ross Nameplate SAP ID#: 36867 LMFBM Supplier: #2 Red Plum Circle Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone Monterey Park CA Contacts: 91755-7486 323-725-6812 Brent Henderson Gen.Mgr / Scott McBride QC Mgr. Vendor Note Nameplates, overlays, foil labels, labels, scotchcals, panels, dials, silkscreening. QUEST 8/06 Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ANODIZING - ALUMINUM MIL-A-8625 TYPE III - HARD No Yes No No Yes No No Yes No No Yes No No Yes No MIL-Q-9858A No Yes No MIL-STD-105 No Yes No CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A PRINTED WIRING BOARDS QUALITY SYSTEM REQUIREMENTS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Friday, January 10, 2014 Page 109 of 146 RTP Company SAP ID#: 18086 LMFBM Supplier: 580 E Front Street No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Winoma Approved MN 55987 507-454-6900 Hugh Miller, CEO/Ken Lanik, V.P., Quality Assurance. Contacts: Vendor Note Thermoplastic Molding Compounds. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Rubbercraft Corp. of California SAP ID#: 51614 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No 15627 S. Broadway No Vendor Phone Gardena Approved No CA 90248 323-775-2261 Edgar Garcia, QA Manager Contacts: Vendor Note Custom molded and extruded rubber. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Model for Aerospace Quality Assurance Systems AS9100 No No No ISO9001:2008 No No No No No No Quality System RUBBER MOLDED GOODS Rubberite Cypress Sponge SAP ID#: 36871 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 301 East Goetz Ave. Approved Yes Vendor Phone Santa Ana CA Contacts: 92707 714-546-6464 Plant Manager A. Brooks Vendor Note Rubber sheeting. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC SUPPLIER QUALITY REQUIREMENTS No Yes No MIL-STD-45662A No Yes No MIL-I-45208A No Yes No CALIBRATION SYSTEMS REQUIREMENTS INSPECTION SYSTEM REQUIREMENTS RUBBER MOLDED GOODS Friday, January 10, 2014 Page 110 of 146 No SAATI Americas SAP ID#: 36874 LMFBM Supplier: No 2050 Hammond Dr. Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone Schaumburg Approved Yes IL 60173 847-925-8570 Kathy Tylka, Q.M./sergio Ceppi, MMF&Q Contacts: Vendor Note Design of new products, improvement of the existing products, production, sales and marketing of fabrics for screen printing, screen printing accessories and fabrics for other industrial applications. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No No No No No No Quality System ISO9001:2000 Sager Electronics SAP ID#: 43291 LMFBM Supplier: No 19 Leona Drive Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Middleborough Approved MA 02346 714-962-8666 Sharon, Quality Contacts: Vendor Note Distribution of Electronic & Electromechanical Products Local Area-Fountain Valley, CA 92708 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2000 Saint-Gobain Performance Plastics SAP ID#: 16321 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No Ca Contacts: No Vendor Phone 7301 Orangewood Ave Garden Grove Approved No 92841-1411 714-995-1818 Barry Lowe quality manager Vendor Note High Performance Seals Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Model for Aerospace Quality Assurance Systems AS9100 No No No ISO9001:2008 ISO9001:2008 No No No No No No Quality System Friday, January 10, 2014 Page 111 of 146 Sava Industries, Inc. SAP ID#: 100181 LMFBM Supplier: No 4 N. Corporate Dr. Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Riverdale Approved NJ 07457 973-835-0882 Jim Pierro/Tom Moore, QA Manager Contacts: Vendor Note Manufacturing and machining. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit khk No No No No No No Quality System ISO9001:2000 Schlumberger SAP ID#: 47011 LMFBM Supplier: 12131 Industry St. No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Garden Grove Approved Ca 92841 657-400-1101 Jesse Alvarez; Greg Manke (QM); George Romero VP of sales Contacts: Vendor Note Submersible power cables and motor lead extensions. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2000 Sea Wire & Cable Co. SAP ID#: 7319 LMFBM Supplier: 451 Lanier Road Approved for Use: No No Status: Yes LMDenver Supplier: No AL Contacts: No Vendor Phone Madison Approved No 35758 800-633-7210 Bob Wills, President; William Thomas, Q.C. Mgr. Vendor Note Wire products, splice wire, insulation sleeving. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No MIL-STD-45662A No No No No No No No No No CALIBRATION SYSTEMS REQUIREMENTS EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Friday, January 10, 2014 Page 112 of 146 Serra Manufacturing Corp. SAP ID#: 36884 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 3039 E. Las Hermanas Rancho Domin Approved CA 90221 310-537-4560 Steve Fitzpatrick & John Hernandez, Owners/Maria Cerda, VP Contacts: Vendor Note Manufacturing precision stampings, washers, gaskets and spacers for aerospace & commercial applications. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No AS9100 No No No ANSI/ASQC Z1.4-1993 No No No EATON Camarillo Basic Supplier Quality Requirements Model for Aerospace Quality Assurance Systems SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Silvas Oil Company, Inc. SAP ID#: 36893 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1757 E. Wooley Road Vendor Phone Oxnard Approved CA 93032 805-486-4581 Tim Simonsgaard, Mgr. Engineering & Marketing/Norma Laster, Contacts: Vendor Note Lubricants and chemicals. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Single Source Print & Graphics SAP ID#: 36895 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No PO BOX 5104 CA Contacts: No Vendor Phone Oxnard Approved No 93031-5104 805-485-9970 Kay Hodges, Owner/Fred Hodges, Production Mgr. & QA MGR Vendor Note Printed Products. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No MISCELLANEOUS ITEMS/SERVICES Friday, January 10, 2014 Page 113 of 146 Slide Systems Inc. SAP ID#: 36896 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 1448 240th St. Vendor Phone Harbor City Approved CA Yes 90710 310-539-3416 Myra Beisel, Owner/Dick Wuerfel, QC Manager/Jim Couture, Q Contacts: Vendor Note Precision metal stamping & metal forming. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Cancelled No Yes No No Yes No No Yes No No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements FOUR SLIDE INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Cancelled PUNCH PRESS QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Cancelled No Yes No MIL-STD-105 Cancelled No Yes No SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Smalley Steel Ring Company SAP ID#: 7460 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 555 Oakwood Road Vendor Phone Lake Zurich Approved IL Contacts: 60047 847-719-5900 Chuck Greenhill, President/Bill McClelland, Manager Vendor Note http://www.smalley.com/ Passivate AMS-QQ-P-35 Heat Treat Alloy Steel Washer/Shims Boeing approved for H/T Steel over 260 KSI MIL-H-6875HI, H/T Steel under 260 KSI MIL-H-6875LO, & its associated testing MIL-H6875LAB Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit AERSPACE QUALITY MANAGEMENT SYSTEMS REQUI AS 9100 Rev C No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements ISO Quality Management ISO-9001:2008 Friday, January 10, 2014 Page 114 of 146 Model for Aerospace Quality Assurance Systems AS9100 No No No ISO/TS 16949:2002 No No No QUALITY MANAGEMENT SYSTEM Sonfarrel, Inc. SAP ID#: 36902 LMFBM Supplier: 3010 LA JOLLA ST. No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone ANAHEIM Approved CA 92806 714-630-7280 Dennis Lewis, QA Mgr. Contacts: Vendor Note 200X-375-111 & 200x-375-71. Aerospace component parts manufacturing Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No Model for Aerospace Quality Assurance Systems AS9100 Sorenson Engineering, Inc SAP ID#: 48168 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 32032 Dunlap Blvs Vendor Phone Yucaipa Approved CA 92399 909.795.2434 Doug Hammer, QA Director Contacts: dhammer@sorensoneng.com Vendor Note Manufacturing, electroplating, and assembly of high precision Swiss screw machined components. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Sousa Corp SAP ID#: Approved for Use: No Status: Yes LMDenver Supplier: No Approved CT Contacts: No No Vendor Phone 1045 New Britian Ave. West Hartford 65374 LMFBM Supplier: No 06133-0108 860-523-9090 Used by Continential Machine Tool Co., Inc Vendor Note Heat Treating Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit NADCAP AS7003 Yes No No AC7102/5 Yes No No Hardness Testing Friday, January 10, 2014 Page 115 of 146 Metallography & Microindentation Hardness AC7104/4 No No No AC7102/3 No No No AC7101/5 Yes No No ISO9001:2008 Yes No No NADCAP - Carbuizing NADCAP - Materials Testing Laboratories - Hardness Quality System South Bay Cable Corp. SAP ID#: 36904 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 54125 Maranatha Drive Idyllwild Approved CA 92549 951-659-2183 Gordon Brown, Gen.Mgr. / Tom Hansen QA Mgr. Contacts: Vendor Note Manufactures a variety of custom electrical, electromechanical, and electro-optical wire and cable. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Spectrum Plating SAP ID#: 49900 LMFBM Supplier: No 202 W. 140th St. Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Los Angeles Approved CA Contacts: 90061 310-533-0748 John Behm, Q.M./Mary McMeans, Pres. Vendor Note Scope of approval applies to reel-to-reel, rack and barrel plating of components only Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIRMENTS No No No No No No Quality System ISO9001:2000 Friday, January 10, 2014 Page 116 of 146 Spira Manufacturing Corp. SAP ID#: 36909 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 12721 Saticoy Street SoNo. Hollywood Approved CA Yes 91605 818-764-8222 George Kunkel, President Michael Kunkel, QC Manager Oscar Contacts: Vendor Note EMI/RFI gaskets, shielding products and honeycomb filters Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No AS9100 No Yes No ISO-9001:2000 No Yes No Model for Aerospace Quality Assurance Systems QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Spirol International Corp SAP ID#: 7515 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 30 Rock Avenue Vendor Phone Danielson Approved CT 06239 860-774-2048 Lisa Labbe-Mgmt Asst.; Jim Shaw-C.E.O. Contacts: Vendor Note Fasteners Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Spirol West, Inc. SAP ID#: 106709 LMFBM Supplier: No Approved CA Contacts: No Vendor Phone 1950 Compton Ave Suit Corona Approved for Use: Yes Status: LMDenver Supplier: No No 92881 951-273-5900 Kevin Prokopchuk, QA Manager & Product Admin./Kristina Dew Vendor Note Engineered fastening solutions. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No Friday, January 10, 2014 No Page 117 of 146 No Spring Industries SAP ID#: 36911 LMFBM Supplier: 1899 Palma Drive Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Ventura Approved CA Yes 93003 805-644-7165 Robert Reyes, QA Manager Contacts: Vendor Note Manufacturer of custom springs. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No No Yes No No Yes No MIL-I-45208A No Yes No AS9100B No Yes No MIL-W-12332 No Yes No MIL-STD-105 No Yes No No Yes No No Yes No CLEAN & HEAT TREAT CH900 AMS-2759/3 REV E EATON Camarillo Basic Supplier Quality Requirements HEAT TREAT ALLOY STEEL MIL-H-6875 CRS IND. SEL. INSPECTION SYSTEM REQUIREMENTS Quality System RESIST. WLDG STEEL SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. SPRINGS WIRE FORMING Stabond Corporation SAP ID#: 36914 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1722 W. 139th street Vendor Phone Gardena Approved Ca Contacts: 90249-3008 310-380-6168 E. Vancura (President), G. Kinnard (Technical Director) Vendor Note Miscellaneous Items/Services. Adhesives. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No EATON Camarillo Basic Supplier Quality Requirements Friday, January 10, 2014 Page 118 of 146 INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Standard Wire & Cable SAP ID#: 48469 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No No Vendor Phone 1959 E. Cashdan Street Rancho Domin Approved No CA 90220 310-609-1811 Milo Ong, QC Mgr./Russ Skrable, Pres. Contacts: Vendor Note Electonic wire & cable, heat shrinkable boots & tubing products. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No No No No No No MIL-I-45208A No No No MIL-Q-9858A No No No No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS QUALITY SYSTEM REQUIREMENTS WIRE FABRICATION Strainsert Company SAP ID#: 36924 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 12 Union Hill Industrial West Conshoh Approved PA Contacts: 19428-2793 610-825-3310 A. Kutsay, President Tim Foley, V.P./Jim Hillferdy Vendor Note Machining Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No No No No FASTENERS PROCESSING MISCELLANEOUS ITEMS/SERVICES Quality System AS9100B Friday, January 10, 2014 Page 119 of 146 Stranco Products SAP ID#: 4490 LMFBM Supplier: No Vendor Phone 650 South Schmidt RoaBolingbrook Approved for Use: Yes Status: LMDenver Supplier: No Approved IL 60440 630-685-8484 Larry Land, Quality Manager/ Bruce Lotz, Vice President Contacts: Vendor Note Purchasing heat shrink tubing P/N M23053/8-005-0 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit ISO TS 16949:2009 No No No No No No EATON Camarillo Basic Supplier Quality Requirements Sun Automation, Inc. SAP ID#: A34279 LMFBM Supplier: No Vendor Phone 2443 W. 208th St., Unit Torrance Approved for Use: Yes Status: LMDenver Supplier: No Approved CA 90501 310-328-7701 Reza Tahmasbi Pres./Neda Tahmasbi QA Mgr. Contacts: Vendor Note Mfr of custom automated assembly machinery. Design and manufacturing custom automated assembly machinery. Design and manufacturing custom tooling for your existing machines. Repair and refurbishment of your existing machinery.Manufacturer of custom automated machinearies and test equipment Provide repair and refurbishment of electronic and electro mechanical eqipment Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Sunbank Electronics (Joslyn Sunbank Company, SAP ID#: 36927 LMFBM Supplier: Approved for Use: No Status: Yes LMDenver Supplier: No 1740 Commerce Way CA Contacts: No Vendor Phone Paso Robles Approved No 93446 805-238-2840 Gary Carr, Dir. Of Quality reports to Kevin Kuhn Vendor Note Backshells and connectors. Design and manufacturer of electrical connector accessories, flexible conduit systems and Military/Commercial Connectors Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CADMIUM PLATING QQ-P-416 TYPE I,II No No EATON Camarillo Basic Supplier Quality Requirements Friday, January 10, 2014 Page 120 of 146 No No No No No No No No No No MFG &/OR ASSY. CONNECTORS Model for Aerospace Quality Assurance Systems AS9100 NICKEL PLATING MIL-C-26074 ELECTROLESS No No No QQ-P-35 TYPE II No No No No No No PASSIVATION QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Superior Plating (JAJ Arrow Plating) SAP ID#: 36929 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 1901 E. Cerritos Avenu Anaheim Approved CA 92805 714-774-1174 Rosa Martin, QA Manager Contacts: Vendor Note General plating services. Vendor to be used on Boeing P.O's only as applicable. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Chemical Processing AS7003 Yes No No No No No AC7004 Yes No No MIL-S-5002 No No No No No No EATON Camarillo Basic Supplier Quality Requirements NADCAP - AQS - Inspection and Test Quality System PASSIVATION/CLEANING PRECIOUS METAL PLATING(GOLD) 999-261 Swiss Production, Inc. SAP ID#: 46079 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No SELREX 2801 Golf Course Dr. Vendor Phone Ventura Approved CA Contacts: 93003 805-654-8525 Michael Petrash, QA Manager/Richard Petrash, VP Vendor Note Job shop / Swiss type screw machining, plastics and metals, 2 1/2" max diameter. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Friday, January 10, 2014 No No Page 121 of 146 No EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No No No No No No No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING SWISS SCREW MACHINE LATHE TURNING SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Syfer Technology Limited SAP ID#: 36931 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Old Stoke Road Vendor Phone Arminghall Nor Approved NR14 (44)1603723300 Mr. John Plaskett, Managing Director/Mr.Steven Watts, Quality Contacts: Vendor Note Certified for the design and mancture of multilayer ceramic capacitorsplanar arrays and feedthrough filters. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Environmental Management System ISO14001:2004 No No No OHSAS 18001:2007 No No No ISO-9001:2008 No No No Occupational Health and Safety Management System Quality Management System Techni-Pak Packaging Products, Inc. SAP ID#: 36940 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 18017 Sky Park Circle, Irvine Approved CA Contacts: 92614 949-296-0017 William Frank/Steven Frank Vendor Note Packaging materials. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 122 of 146 No Tension Member Technology Laboratories SAP ID#: 44746 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 5721 Research Drive Vendor Phone Huntington Bea Approved CA 92649-1616 714-898-5641 Philip T. Gibson, President/James A. Walther, Test Director/Ma Contacts: Vendor Note Cable and rope testing, special cable terminations. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CABLE SWAGING/CABLE PRODUCTS No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Thermech Engineering Corp. SAP ID#: 36949 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 1773 W. Lincoln Avenu Anaheim Approved Yes CA Contacts: 92801 714-533-3183 Mahendra Doshi Vendor Note Teflon/Powder Coating; Compression Molding. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No Yes No MIL-STD-45662A No Yes No MIL-I-45208A No Yes No ISO 10012-1/17025 No Yes No AS9100B ISO9001:2008 No No Yes Yes No No ISO-9002 No Yes No ANSI/ASQC Z1.4-1993 No Yes No CALIBRATION SYSTEMS REQUIREMENTS INSPECTION SYSTEM REQUIREMENTS PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. Quality System QUALITY SYSTEMS FOR PRODUCTION SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Friday, January 10, 2014 Page 123 of 146 Thornton Plastics SAP ID#: 36951 LMFBM Supplier: No 745 Pacific Ave. Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Salt Lake City Approved UT 84104 800-248-3434 Renee Thonton, President/Jean Eastham/Briton McConkre, Vic Contacts: Vendor Note Plastic Vials Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit video No Thorsen's Precision Grinding SAP ID#: 36952 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone 20 E. 6th St. Gate 1 PO WAYNESBORO Approved No PA 17268 717-765-9090 Contacts: Vendor Note Purchasing core pins. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Titan Spring, Inc. SAP ID#: 36954 LMFBM Supplier: No 7300 Radford Avenue Approved for Use: Yes Status: LMDenver Supplier: No CA Contacts: No Vendor Phone No. Hollywood Approved No 91605 818-755-3800 John Escobar, QA Manager/Jim Glenn, President Vendor Note Springs, stampings, wireforms, and thin metal components. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No AS9100 No No No ANSI/ASQC Z1.4-1993 No No No No No No EATON Camarillo Basic Supplier Quality Requirements Model for Aerospace Quality Assurance Systems SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. SPRINGS Friday, January 10, 2014 Page 124 of 146 Tower Mfg. Co. SAP ID#: 36959 LMFBM Supplier: Vendor Phone 22426 So. Avalon Blvd. Carson Approved for Use: Yes Status: LMDenver Supplier: No Approved CA Yes 90745 310-830-7575 Mike Yates, Juan Arreus QA Manager Contacts: Vendor Note Tooling & machined parts. High tolerance Aerospace/Prototype machining Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No No Yes No No No Yes Yes No No No Yes No No Yes No No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING GENERAL CNC MILLING PUNCH PRESS Quality System AS9100B N/A TOOL MAKING JIG & FIXT. BLDG. WIRE EDM Tri/Applied Technologies SAP ID#: 10000245 Approved for Use: Yes Status: LMFBM Supplier: No LMDenver Supplier: No Vendor Phone 9063 Bee Caves Road Austin Approved TX Contacts: 78733 512-263-2101 rgarcia@tri-int.com Vendor Note Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 Friday, January 10, 2014 No No Page 125 of 146 No Triax Tool & Machining, Inc. SAP ID#: 36961 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 2630 Lavery Ct., Ste E Newbury Park Approved (Limited) CA Yes 91320 805-499-4543 Forest Andrews, President; Guillermo Brajas, QA Manager Contacts: Vendor Note Precision Machined Components- Limited use for Lockheed Martin All PMM parts require a deliverable FAI or a FAI at Cooper. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit No Yes No No Yes No MIL-I-45208A No Yes No ANSI/ASQC Z1.4-1993 No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Tricor Industries, Inc. SAP ID#: 36962 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 290 Hansen Access Ro King of Prussia Approved PA 19406 610-265-1111 Tony Villano, QC Manager/Anthony Villano, V.P. Contacts: Vendor Note Precision springs and wireforms. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A SPRINGS Trident Calibration Labs SAP ID#: 3750 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 9615 Cozycroft Ave. Vendor Phone Chatsworth Approved CA Contacts: 91311 818-886-3750 Craig Fink 818-917-6669 Vendor Note Parent Company: CEET Industries Inc. 2726 Shmily Ct., Lancaster, CA 818-917-6669 Process Friday, January 10, 2014 Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Page 126 of 146 ISO/IEC 17025:2005 Trident Plating, Inc. SAP ID#: 36963 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No Approved CA Contacts: No Vendor Phone 10046 Romandel Ave. Santa Fe, Sprin Yes No 90670 562-906-2556 L. Ian Holmberg, Operations Manager/ Paul R. Garcia, QC Man Vendor Note Metal plating, finishing. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAD/ELECTROLESS NICKEL PLATING 999-256 No Yes No No Yes No ANSI/NCSL Z540-1 No Yes No MIL-STD-45662A No Yes No MIL-C-14550 No Yes No No Yes No QQ-C-26074 No Yes No MIL-I-45208A No Yes No CADMIUM PLATING QQ-P-416 TYPE I,II CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. CALIBRATION SYSTEMS REQUIREMENTS COPPER PLATING EATON Camarillo Basic Supplier Quality Requirements ELECTROLESS NICKEL PLATE INSPECTION SYSTEM REQUIREMENTS NICKEL PLATING QQ-N-290 999-310 ELECTRO DEPOSITED No No Yes Yes No No QQ-P-35 TYPE II No Yes No No Yes No PASSIVATION PASSIVATION/CLEANING MIL-S-5002 PRECIOUS METAL PLATING MIL-G-45204 TYPE I, CL 1 No Yes No 999-261 SELREX No Yes No MIL-Q-9858A No Yes No ANSI/ASQC Z1.9-1993 No Yes No PRECIOUS METAL PLATING(GOLD) QUALITY SYSTEM REQUIREMENTS SMPLG PROC. & TBLS BY VAR. FOR % NON-CONF. Friday, January 10, 2014 Page 127 of 146 SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 MIL-STD-105 Tri-Star Electronics, Inc. SAP ID#: 50269 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No No 2201 Rosecrans Ave. No No Vendor Phone El Segundo Approved Yes Yes CA 90245 310-536-0444 Contacts: Vendor Note This 'Screw Machine' fabricating house will be manufacturing Custom and Military Contacts for us. They H/T & Plate as well. Parent Company: Carlisle IT (same address) www.carlisleit.com Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit No No No No No No AMS 2418 No No No 5000-80-0033 No No No COPPER PLATE, ELECTRODEPOSITED MIL-C-14550 Class 4 Copper Plating FINISH GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 Type II, Class 1, Grade C No No No mil-dtl-45204 Full and Selective No No No MIL-H-7199 No No No QQ-N-290 No No No AMS-QQ-N-290 No No No AS9100C ISO9001:2008 No No No No No No ASTM B 700 No No No Gold Plating HEAT TREAT, COPPER ALLOYS NICKEL PLATE (ELECTRODEPOSITED Nickel Plating Quality System Silver Plating Friday, January 10, 2014 Page 128 of 146 TRU-FORM IND. INC. SAP ID#: 47555 LMFBM Supplier: No 14511 ANSON AVE. Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Santa Fe Sprin Approved CA 90670-5301 562-802-2041 DAVID MEEK, dave@tru-form.com Contacts: Vendor Note CLIPS, BRACKETS, WIRE FORMS, STAMPINGS, LASER CUTTING, SPRINGS, ASSEMBLIES Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 AS9100B Tube Service Co. SAP ID#: 36967 LMFBM Supplier: No No Approved for Use: Yes Status: LMDenver Supplier: No Approved No No Vendor Phone 9351 S. Norwalk Blvd. Santa Fe Sprin CA Yes No No 90670 800-776-8823 Dan Hollar, Group Mgr./Hugh Brown, Q.A. Mgr. Contacts: Vendor Note Distrubtor of steel and aluminum tube and pipe. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No ISO-9001:2000 No Yes No MIL-STD-105 No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. TUBE BENDING/FORMING/MTL SPNNG Turner & Seymour SAP ID#: 6170 LMFBM Supplier: 100 Lawton St. Approved for Use: No Status: Yes LMDenver Supplier: No Vendor Phone Torrington Approved CT Contacts: 06790 (860)489-9214 Barbara Vendor Note Weldless Chain Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Basic Cooper Quality Requirements No Friday, January 10, 2014 No Page 129 of 146 No BASIC QUALITY REQUIREMENTS FOR DISTRIBUTORS No Tyco Electronics SAP ID#: 36923 LMFBM Supplier: No 76 Commercial Ave Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone East Providenc Approved No RI 02914 800 827-1939 William Hatton QA Mgr., Robert Sweeney Dir.Quality North Am Contacts: Vendor Note Print 6 colors, die cut, laminate labels as blank labels and also preprint barcode and custom design labels. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No Quality System ISO9001:2000 Tyco Electronics/ Raychem SAP ID#: 36969 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 300 Constitution Drive Menlo Park Approved CA 94025 866-314-7922 Rich Dvorak, I/S Sales Division Manager Kelly Dellinger, I/S Sal Contacts: Vendor Note Stamping, Molding, & Assembly Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Calibration System ISO 10012-1 No No No AS9100B ISO9001:2008 No No No No No No Quality System Uline SAP ID#: 1104 LMFBM Supplier: 12575 Uline Drive No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Pleasant Prarie Approved WI Contacts: 53158 Kortney Hannes, customer.service@uline.com Vendor Note Shipping supplies Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 130 of 146 No Uline, Inc SAP ID#: 7741 LMFBM Supplier: 12575 Uline Drive No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Pleasant Prairie Approved WI 53158 800-295-5510 Kortney Hannes, customer.service@uline.com Contacts: Vendor Note Shipping Supplies Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo BASIC SUPPLIER QUALITY REQUIRE No Uniquip SAP ID#: 56795 LMFBM Supplier: 6401 Congress Ave No Approved for Use: Yes Status: LMDenver Supplier: No No Vendor Phone Boca Raton Approved No FL 33487 561-988-9875 Steve Louder, Q.M. / Juri Zaizala, Pres. Contacts: Vendor Note Electronic Componets Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2000 United States Brass & Copper SAP ID#: 107183 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No N/A 1401 Brook Drive No IL Contacts: No Vendor Phone Downers Grove Approved No 60515 630-705-3430 David Kavanaugh President, James Mallon Quality Manager Vendor Note metals servicenter (non-ferrous products) strip, sheet, rod, bar, plate Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System Friday, January 10, 2014 ISO9001:2008 No No No ISO/TEC 17021 No No No Page 131 of 146 United Western Enterprises, Inc. SAP ID#: 36977 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 850 Flynn Road Approved Yes Vendor Phone Camarillo CA 93012 805-389-1077 Jeff, QA Manager Contacts: Vendor Note Photochemical etching. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit No Yes No No Yes No MIL-S-5002 No Yes No QQ-P-35 No Yes No ISO-9001:2000 No Yes No QQ-S-365 No Yes No EATON Camarillo Basic Supplier Quality Requirements PASSIVATE Passivation Treatments for Corrosion Resistant Steel QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Silver Plating US Calibration SAP ID#: 48535 LMFBM Supplier: Vendor Phone 17922 Sky Park Cir., Su Irvine Approved for Use: No Status: Yes LMDenver Supplier: No Approved CA Contacts: 92614 949-724-9474 Jim Simmons CEO, Richard Kappmeier QA Mgr. Vendor Note Lab and On-site calibration services Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit BASIC QUALITY SYSTEM REQUIREMENTS No No No No No No Calibration System ISO 17025:2005 Friday, January 10, 2014 Page 132 of 146 Vaisala, Inc SAP ID#: 36982 LMFBM Supplier: 10 D Gill St. No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Woburn Approved MA Contacts: 01801 800-408-9454 Petterie Sappinen (QM) Vendor Note Calibration of dewpoint sensors and related equipment. Environmental measurement Instruments. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Calibration System ANSI/NCSL Z540.1 No No No ISO 14001:2004 No No No ISO17025:2005 No No No ISO 10012-1/17025 No No No ISO-9001:2000 No No No ENVIRONMENTAL MANAGEMENT SYSTEMS Genereal Requirements for the Competence of Testing and PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Valley Plating, Inc. SAP ID#: 540 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 412 Albany ST Vendor Phone Springfield Approved MA Contacts: 01105 413-788-7375 Tim Martin, Quality Mgr. Vendor Note Chemical Processing for Continental Machine Tool Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Nadcap AS7003 No No No AC7108 AC7108 No Yes No No No No AC7108/1 AC7108/1 Yes No No No No No AC7004 Yes No No AS9100B ISO9001:2008 No No No No No No NADCAP - Chemical Processing NADCAP - Painting and Dry Film Coatings NADCAP- Standard Requirements Quality System Friday, January 10, 2014 Page 133 of 146 Valley Seal Company SAP ID#: 36983 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 6430 Variel Avenue #10 Woodland Hills Approved CA Yes 91367 818-883-3505 Sue Falkenhagen, President/Susan L. Ellis, QA Manager/Pat S Contacts: Vendor Note O-rings, gaskets, backups and other misc. seals in materials such as rubber, metal and PTFE. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No No Yes No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 RUBBER MOLDED GOODS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Vanart Engineering Company SAP ID#: 36985 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 3504 North River Road Franklin Park Approved IL 60131 847-678-6255 Dan Mateja, Quality Mgr. Contacts: Vendor Note Spring Contacts Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No PROGRESSIVE DIE PUNCH PRESS Van's Manufacturing, Inc. SAP ID#: 36986 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 330 Easy Street Vendor Phone Simi Valley Approved CA Contacts: 93065 805-522-6267 Louis Tignac, Owner/President/ QA Manager (vansmmfg@sbcg Vendor Note CNC Machining Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements Friday, January 10, 2014 Page 134 of 146 No No No No No No No No No No No No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING LATHE TURNING GENERAL Vantage Technology SAP ID#: 36987 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 4675 South Windermer Englewood Approved CO 80110 303-761-2121 Ken Neal (QM) JC Cahow (main contact) Brent Birchler (VP Sa Contacts: Vendor Note Parent Company: Killark Electric 3940 Dr. Martin Luther King Dr., St. Louis, MO 63113 Mfr. And distribution of electrical connectors and interconnect systems for hazardous classified and non-hazardous, commercial and non-commercial applications. Manufacturer of explosionproof electrical connectors and cable assemblies Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 No No No ISO-9001:2000 No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Varga Enterprises SAP ID#: 42614 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No 2350 S. Airport Blvd. Vendor Phone Chandler Approved AZ Contacts: 85286 480-963-6936 George Varga President, Lynn Thompson Inventory Control Ma Vendor Note Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 135 of 146 No Ventura Heat Treating, Inc. SAP ID#: 36996 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 1950 Williams Dr., Ann Oxnard Approved CA 93036 805-485-5954 Leon Jenkins, QA Contacts: Vendor Note Heat treat alloy steels and berillum. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No HEAT TREAT ALLOY STEEL MIL-H-6875 MIL-H-6875 CRS CRS IND. SEL. No No No No No No MIL-H-7199 COPPER-BERYLLIUM No No No No No No HEAT TREAT CU & CU-ALLOYS SAND BLASTING Ver Sales Inc. SAP ID#: 30339 LMFBM Supplier: Vendor Phone 2509 North Naomi StreeBurbank Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes CA Contacts: 91504 818-567-3000 Danny Cebellos, Quality Vendor Note Wire, Rope,Chain & Cable Assemblies Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CABLE SWAGING/CABLE PRODUCTS No Yes No No Yes No MIL-I-45208A No Yes No MIL-DTL-6117 No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS WIRE ROPE ASSEMBLIES, SWAGING Friday, January 10, 2014 Page 136 of 146 Verdugo Tool & Eng. Co. Inc. SAP ID#: 36998 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 20600 Superior Street Chatsworth Approved CA Yes Contacts: 91311 818-998-1101 Kent Brown Gen Mgr / Robert Flores QA Mgr Vendor Note Metal stamping, tool & die, lasercutting, wire EDM. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No MIL-I-45208A No Yes No No Yes No No Yes No ISO9001:2008 No Yes No ANSI/ASQC Z1.4-1993 No Yes No INSPECTION SYSTEM REQUIREMENTS PROGRESSIVE DIE PUNCH PRESS Quality System SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Veyance Tech. Inc. (Frmly: Goodyear Engineered SAP ID#: 42328 LMFBM Supplier: Approved for Use: No Status: Yes LMDenver Supplier: No 1144 E. Market St. Vendor Phone Akron Approved OH Contacts: 44316 800-235-4632 Gilles Bilodeau, President Yves Faucher, QA Manager Vendor Note Military Hose-Rubber. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Quality System AS9100B ISO9001:2008 No No No No No No No No No No No No No No No RUBBER EXT,CALENDERING&COMP RUBBER MOLDED GOODS VALVE AND HOSE ASSYS Friday, January 10, 2014 Page 137 of 146 Videojet Technologies, Inc SAP ID#: 12213 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 1500 Mittel Blvd Vendor Phone Wood Dale Approved IL 60193 800-843-3610 VTI_DomesticCS <vti.domesticcs@videojet.com> Contacts: Vendor Note ALL ink from this vendor is to have CoC. and labeled as Age Sensitive Material. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit Quality System ISO9001:2008 W & W Manufacturing SAP ID#: 37002 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No No 426 W. Magnolia CA Contacts: No Vendor Phone Glendale Approved Yes No 91204 818-241-4431 Ed Wallen, President/Mel Pechter, Q. A. Manager Vendor Note Screw machining. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No Yes No No Yes No No Yes No No Yes No No Yes No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING GENERAL SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 W. L. Gore & Associates SAP ID#: 37003 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Nordring 1 Vendor Phone Pleinfeld, Germ Approved 91785 Contacts: 610) 268-1000 Reinhard Schellhaase Vendor Note Mini Coax Cable. Cable, Cable assemblies, Components for electrical and optical interconnects and Aircraft sealants. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Friday, January 10, 2014 No No Page 138 of 146 No Wacker Chemical Corp (Precision Silicones, Inc) SAP ID#: 37005 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 13910 Oaks Avenue Approved Yes Vendor Phone Chino CA 91710 909-590-8822 Sudipta Das, QA Manager/Axel Schmidt, President. Contacts: Vendor Note Customized silicone rubber. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 RUBBER EXT,CALENDERING&COMP Wafco Gage Company SAP ID#: 37006 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 16629 Gramercy Place Gardena Approved CA 90247 310-532-3106 Jesse Vales, QA Mgr. Contacts: Vendor Note Custom gages. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No No No No EATON Camarillo Basic Supplier Quality Requirements GAGES Wassco Corp. SAP ID#: 7792 LMFBM Supplier: Vendor Phone 12778 Brook Printer Pl Poway No Approved for Use: Yes Status: LMDenver Supplier: No Approved CA Contacts: 92064 310-787-3030 Scott Codispoda, Inside Sales/Ed Durfey, President/Al Rios, V. Vendor Note Dist. Of production supplies (soldering equipment). Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Friday, January 10, 2014 No Page 139 of 146 No Wesco Aircraft Hardware Corp. (Frmly: Airtechnic SAP ID#: 36680 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 3851 Webb Road Vendor Phone Wichita Approved KS Yes 67226 316-315-1241 Mike Battenfield Quality Director, Sven St.Peter Quality Manage Contacts: Vendor Note Assembly & Distribution of Interconnect and Electromechanical Products. Interconnect/Electrical Mechanical…..Glenair, Airborne, Radial, Deutsch, Aero Electric Approved. Value Added Assembly lines for Deutch and Aero Electric Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No No Yes Yes No No No Yes No MACHINING EXOTIC MATERIAL SWISS SCREW MACHINE Model for Aerospace Quality Assurance Systems AS9100 West Coast Gasket SAP ID#: 2973 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 300 Ranger Ave. Vendor Phone Brea Approved CA Contacts: 92821 714-869-0123 Mike Murray (QM) Chris Russell (VP Sales) Aaron Kramer (mai Vendor Note Various sealing devices. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No No No No No No MIL-I-45208A No No No MIL-Q-9858A No No No ANSI/ASQC Z1.4-1993 No No No EATON Camarillo Basic Supplier Quality Requirements INSPECTION SYSTEM REQUIREMENTS QUALITY SYSTEM REQUIREMENTS SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. Friday, January 10, 2014 Page 140 of 146 West Coast Metal Stamping (Form: B & J Tool & Di 550 West Crowther Ave Placentia SAP ID#: 37049 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone CA 92870 714-792-0322 Jerome Reinhart, President/Dan Totom, Q.A. Mgr. Contacts: Vendor Note Metal stamping Electrolurgy, Inc. for Passivation QQ-P-35, Gold Plate MIL-G-45204, Electoless Nickel MIL-C-26074, Cad QQ-P- 416 Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No MIL-G-45204 No Yes No MIL-C-26074 No Yes No QQ-P-35 No Yes No ISO-9001:2000 No Yes No GOLD PLATE, ELECTRODEPOSITED NICKEL PLATE, ELECTROLESS Passivation Treatments for Corrosion Resistant Steel QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. West Coast Plastics Equipment, Inc. SAP ID#: 48220 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 6122 W. Washington Bl Culver City Approved CA Contacts: 90232 323-870-7733 Richard Coates, richard@westcoastplastics.com Vendor Note Distributor of equipment & parts for the plastics, packaging & related industries Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo BASIC SUPPLIER QUALITY REQUIRE No No No No No No BASIC QUALITY SYSTEM REQUIREMENTS Friday, January 10, 2014 Page 141 of 146 Western Aerospace Inspection SAP ID#: W08851 Approved for Use: Yes Status: LMFBM Supplier: No LMDenver Supplier: No Vendor Phone 1376 Walter St., Unit 7 Ventura Approved CA 93003 805-644-3882 Jamie Lagos, QC Manager; Benito Lagos, President Contacts: Vendor Note Liquid Penetrant, Magnetic Particle and Radiographic Examination. See vendor file for detailed NADCAP approval scope Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit NADCAP - Testing Facility - Ultrasonic AC7114/3 No No No AC7114/4 No No No AS7003 No No No AC7114 No No No ASTM E 1417 Yes No No NADCAP - Testing Facility Film Radiography NADCAP -NDT NADCAP NonDestructive Testing STANDARD PRACTICE FOR LIQUID PENETRANT TESTI Western Fibre Products SAP ID#: 37008 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 10924 Vulcan Street Approved Yes Vendor Phone South Gate CA Contacts: 90280 562-861-6665 Louis Guida, President/Tom Bosso, QC Manager/James Tyrolt, Vendor Note Machined plastics. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A MACHINING EXOTIC MATERIAL Friday, January 10, 2014 Page 142 of 146 Western Gasket & Pkg. Co. SAP ID#: 37009 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 3007 Fruitland Avenue Los Angeles Pending Survey CA 90058 323-583-9731 Roy Alexander, Quality Contacts: Vendor Note Manufacturer of gaskets and metals stampings. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No No No No PROGRESSIVE DIE PUNCH PRESS Whaling West Packaging Corporation SAP ID#: 37011 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 2574 Turquoise Circle Newbury Park Approved Yes CA 91320 805-499-8759 Valentina Whaling, QA Manager Contacts: Vendor Note Military and commercial packaging and crating. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTs MIL-I-45208A PACKING & PACKAGING Whitmor Wirenetics SAP ID#: 37014 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 27737 Avenue Hopkins Valencia Approved CA Contacts: 91355 661-257-2400 Michael Weiss, President Stella Reaza, QA Manager Vendor Note Wire & cable specialist. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit ELECTRICAL CABLE FABRICATION No No Model for Aerospace Quality Assurance Systems Friday, January 10, 2014 Page 143 of 146 No AS9100 No No No ISO9001:2008 No No No Quality System Willson Scientific Glass Inc. SAP ID#: 37016 LMFBM Supplier: Approved for Use: Yes Status: LMDenver Supplier: No 528 E. Fig Ave. Vendor Phone Monrovia Approved CA Yes 91016 626-303-1656 Janice Palmer, Office Manager, Robert Willson President, Brent Contacts: Vendor Note Custom hermetic glass sealing. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A OUTGASSING (VACUUM BAKE) Wire Pro SAP ID#: 37018 LMFBM Supplier: 9231 Eton Avenue Approved for Use: Yes Status: LMDenver Supplier: No Approved Yes Vendor Phone Chatsworth CA 91311 818-998-5577 Robert Hynes, President. Contacts: Vendor Note Wire and edm manufacturing. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No No Yes No INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A WIRE EDM Y & D Rubber Co., Inc. SAP ID#: 46865 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone 1451 South Carlos Ave Ontario Approved CA Contacts: 91761 909-947-9900 Trinidad, Quality Control Vendor Note info@ydrubber.com Process Friday, January 10, 2014 Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit Page 144 of 146 Quality System ISO9001:2008 Yokogawa Corp. (Ando Prod. Service) SAP ID#: 13366 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No No 2 Dart Road No Vendor Phone Newman Approved No GA 30265 770-254-0400 D. Johnson CEO, Dale Griffin Corporate QA Mgr. Contacts: Vendor Note Mfg, sales and service, metering instrumentation, test & measurement equipment Field Instruments, Analyzers, Digital Acquisition, Test and Measurement, Meters and Instruments. Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No No No No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Zemarc SAP ID#: 79753 LMFBM Supplier: 6431 Flotilla Street No Approved for Use: Yes Status: LMDenver Supplier: No Vendor Phone Los Angeles Approved CA 90040 Tim Prichard QM Contacts: Vendor Note Process NAPCAP Spec. LMFBM LM_Denver Type/Class/Limit EATON Camarillo BASIC SUPPLIER QUALITY REQUIRE No No No No No No Quality System ISO9001:2008 Zero Manufacturing SAP ID#: 16439 LMFBM Supplier: No Approved for Use: Yes Status: LMDenver Supplier: No 500 West 200 North Vendor Phone North Salt Lake Approved UT Contacts: 84054 801-298-5900 Brent Skinner VP Oper. / Jolene Kawa QA Dir. Vendor Note Manufacture housings and aluminum castings. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No No QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. Friday, January 10, 2014 Page 145 of 146 No ISO-9001:2000 Zet-Tek, Inc. SAP ID#: 37022 LMFBM Supplier: No 22951 La Palma Ave Approved for Use: Yes Status: LMDenver Supplier: No CA Contacts: No Vendor Phone Yorba Linda Approved Yes No 92887 714-777-8770 Dan Zettler, President & Owner/Sandra Rubino, V.P. Operation Vendor Note Machined parts. Process Spec. NAPCAP LMFBM LM_Denver Type/Class/Limit EATON Camarillo Basic Supplier Quality Requirements No Yes No No Yes No MACHINING - SWISS SCREW MACHINE Friday, January 10, 2014 Page 146 of 146
