Aluminum Frame Kit (V1.0) Features: • Available with Sapling’s 9” (22.86 cm), 12” (30.48 cm), and 16” (40.64 cm) round analog clocks • Aluminum Frame is an optional accessory that could be placed over the SlimLine case of the round analog clocks • Can be ordered separately as an add-on accessory or fully assembled with the round analog clock • Clear Anodized finish applied • Gives a sleek and sophisticated look to the clock • Aluminum Frame Kit includes: • Aluminum frame • Inner aluminum supporting ring specification sheets may change without prior notice The Sapling Company, Inc. • 1633 Republic Road Huntingdon Valley, PA 19006 USA • P: (+1) 215.322.6063 • F: (+1) 215.322.8498 • W: www.sapling-inc.com Aluminum Frame Kit (V1.0) Specifications: Depth R1 R2 Front View of the Aluminum Frame Side View of the Aluminum Frame Clock Size Diameter (R1) Diameter (R2) 9” (22.86 cm) 10.62” (26.97 cm) 9.45”(24.00 cm) 12” (30.48 cm) 13.81” (35.07 cm) 12.55” (31.87 cm) 16” (40.64 cm) 17.82” (45.26 cm) 16.54” (42.01 cm) Depth 1.76” (4.47 cm) 1.76” (4.47 cm) 1.8” (4.57 cm) Ordering Information: Sapling Aluminum Frame Kit: A-CASE-ALUM-XX Size: 9: 9” 12: 12” 16: 16” NOTE: The part numbers are only for Frame Kits. If the clock part number already includes the Brush Aluminum ring, there is no need to order this part separately. The Sapling Company, Inc. • 1633 Republic Road Huntingdon Valley, PA 19006 USA • P: (+1) 215.322.6063 • F: (+1) 215.322.8498 • W: www.sapling-inc.com