Light Gauge Steel Screws
Drywall Screws
Bugle Fine
Gypsum Board to
25-20 Gauge Steel Studs
For attaching gypsum board to 25-20 gauge
steel studs. Bugle head No. 2 Reduced
Phillips Recess.
Gypsum
Light Gauge
Steel Stud
Bugle Coarse
Bugle Fine
Part No.
FS100
FS118
FS114
FS112
FS158
FS6200
FS200
FS214
FS212
FS300
FS312
FS334
FS400
FS412
FS500
FS600
Size
6x1
6 x 1-1/8
6 x 1-1/4
6 x 1-1/2
6 x 1-5/8
6x2
7x2
7 x 2-1/4
8 x 2-1/2
8x3
10 x 3-1/2
10 x 3-3/4
10 x 4
10 x 4-1/2
10 x 5
10 x 6
Box Qty
10M
10M
8M
6M
5M
3.5M
3.5M
3M
2.5M
2M
1M
1M
1M
1M
1M
1M
Self-Drilling Screws
Bugle Head
Pan Framer
Light Gauge Steel Track to
Light Gauge Steel Studs
For attaching 25-20 gauge steel track to
25-20 gauge studs. With serrations to
reduce spin out. No. 2 Reduced Phillips
Recess.
Pan Framer
Part No.
PF716
PF71615M
Size
7 x 7/16
7 x 7/16
Gypsum Board to
20-14 Gauge Steel Studs
For attaching gypsum board to 20-14 gauge steel
studs. No. 2 Reduced Phillips Recess. Available
in zinc and black phosphate.
Gypsum Board
Box Qty
10M
15M
Light Gauge
Steel Track
Steel Stud
Light Gauge
Steel Stud
Trim Head
For attaching wood trim over gypsum to 20-14
gauge metal. No. 1 or 2 Square Recess. Available
in zinc and black phosphate.
Gypsum
Wood Stud
High and Low Thread
For attaching drywall to light gauge steel studs and
for special applications requiring strip-out
resistance. No. 2 Reduced Phillips Recess.
Bugle Coarse
Part No.
CS100
CS118
CS114
CS112
CS158
CS6200
CS200
CS214
CS212
CS300
CS312
CS334
CS400
CS412
CS500
CS600
Wood Trim
Size
6x1
6 x 1-1/8
6 x 1-1/4
6 x 1-1/2
6 x 1-5/8
6x2
7x2
7 x 2-1/4
8 x 2-1/2
8x3
10 x 3-1/2
10 x 3-3/4
10 x 4
10 x 4-1/2
10 x 5
10 x 6
Box Qty
10M
10M
8M
6M
5M
3.5M
3.5M
3M
2.5M
2M
1M
1M
1M
1M
1M
1M
Drywall to
Light Gauge Steel Studs
High and Low Thread
Part No.
HL1
HL118
HL114
HL158
HL2
HL214
HL212
HL3
Size
6x1
6 x 1-1/8
6 x 1-1/4
6 x 1-5/8
7x2
7 x 2-1/4
8 x 2-1/2
8x3
Gypsum Board
Modified Truss
Metal Lath in Stucco to Wood
or Light Gauge Steel Studs
For attaching wood trim and base over
gypsum board to light gauge steel studs or
wood substrate. No.1 or 2 Square Recess.
Wood Trim
Gypsum
Trim Head
Part No.
TH158
TH214
TH3
Size
6 x 1- 5/8
6 x 2- 1/4
8x3
For attaching metal lath in stucco and other
applications to wood or 25-20 gauge steel
studs. No. 2 Reduced Phillips Recess.
Metal Lath
in Stucco
Modified Truss
Part No.
MT812
MT834
MT100
MT114
MT158
MT178
MT200
MT212
MT300
Size
8 x 1/2
8 x 3/4
8x1
8 x 1-1/4
8 x 1-5/8
8 x 1-7/8
8x2
8 x 2-1/2
8x3
Box Qty
10M
8M
5M
5M
5M
4M
2.5M
2M
1.5M
Bugle Head Pilot Point
For attaching up to 3/4” plywood to 20-14 gauge
metal. Combo drive. 1,000 hour exterior all
weather coating.
Flat Head Pilot Point
For attaching up to 1-1/8” plywood to 18-12
gauge metal. Combo drive. 1,000 hour exterior all
weather coating.
Box Qty
10M
10M
8M
5M
3.5M
3M
2.5M
2M
Phillips Wafer Head
Slotted Hex Washer Head
Box Qty
5M
3M
2M
Drywall Laminator
For attaching gypsum board to gypsum board.
No. 2 Phillips Recess.
Steel Stud
Gypsum Board to Gypsum Board
Drywall Laminator
Part No.
LS10112
Size
10 x 1-1/2
Light Duty Anchoring
to Concrete, Brick and Other
Masonry Products
Wood Framing
Concrete
1/4” Hex Head
Part No.
HC3114
HC3134
HC3214
HC3234
HC3314
HC3334
HC3400
5/16” Hex Head
Part No.
HC4114
HC4134
HC4214
HC4234
HC4314
HC4400
#2 Phillips Flat Head
Part No.
FC3114
FC3134
FC3214
FC3234
FC3314
FC3334
FC3400
#3 Phillips Flat Head
Part No.
FC4114
FC4134
FC4214
FC4234
FC4314
FC4400
Slotted Hex Washer Head
Part No.
Size
1/4” Drive
HW4712
7 x 1/2
HW4812
8 x 1/2
HW4834
8 x 3/4
HW48100
8x1
HW48112
8 x 1-1/2
HW48200
8x2
HW41012
10 x 1/2
HW41034
10 x 3/4
HW410100
10 x 1
HW410112
10 x 1-1/2
HW410200
10 x 2
5/16” Drive
HW51012
HW51034
HW510100
HW510112
HW510200
Plywood
Size
3/16 x 1-1/4
3/16 x 1-3/4
3/16 x 2-1/4
3/16 x 2-3/4
3/16 x 3-1/4
3/16 x 3-3/4
3/16 x 4
Size
1/4 x 1-1/4
1/4 x 1-3/4
1/4 x 2-1/4
1/4 x 2-3/4
1/4 x 3-1/4
1/4 x 4
Size
3/16 x 1-1/4
3/16 x 1-3/4
3/16 x 2-1/4
3/16 x 2-3/4
3/16 x 3-1/4
3/16 x 3-3/4
3/16 x 4
Size
1/4 x 1-1/4
1/4 x 1-3/4
1/4 x 2-1/4
1/4 x 2-3/4
1/4 x 3-1/4
1/4 x 4
Box Qty
6M
4M
3M
3M
2M
1.5M
1M
Box Qty
3M
2M
2M
2M
1M
1M
Box Qty
6M
4M
3M
3M
2M
1.5M
1M
Box Qty
3M
2M
2M
2M
1M
1M
Trim Head
Part No.
THDZ158
THDZ214
THDZ3
THD158*
THD214*
THD3*
*Black Phosphate
Size
6 x 1-5/8
6 x 2-1/4
8x3
6 x 1-5/8
6 x 2-1/4
8x3
Box Qty
5M
3M
2M
5M
3M
2M
15M
10M
10M
8M
5M
3M
8M
6M
5M
3M
2M
10 x 1/2
10 x 3/4
10 x 1
10 x 1-1/2
10 x 2
8M
6M
5M
3M
2M
Cement Board Screws
Spade-Point With Nibs
Designed to fasten cement board to wood or light
gauge steel studs (25-20 gauge). Nibs under the
head allow it to countersink into the board. The
spade point penetrates the board without cracking
and high-low threads ensure high withdrawl
resistance. No. 2 Reduced Phillips Recess with
nibs. 1,000 hour exterior all weather coating.
Cement Board to Wood
or Light Gauge Steel Studs
Spade-Point Cement Board Screws
Part No.
Size
CB114
8 x 1-1/4
CB158
8 x 1-5/8
CB214
8 x 2-1/4
20-16 Gauge Steel
Track to 20-16 Gauge Steel Studs
For attaching 20-16 gauge steel track to 20-16
gauge steel studs. With serrations to reduce spin
out. No. 2 Reduced Phillips Recess. Available in
zinc and black phosphate.
Steel Track
Box Qty
5M
5M
3M
Pan Framer
Part No.
PFD716*
PFD71615*
PFZD71615M**
*Black Phosphate
Size
7 x 7/16
7 x 7/16
7 x 7/16
**Zinc
Box Qty
10M
15M
15M
Pancake Framer
For attaching 20-14 gauge steel track to 20-16
gauge steel studs. No. 2 Reduced Phillips Recess.
Steel Track
Pilot Point Bugle Head
Part No.
PP2
For attaching strapping or furring channel to steel
joist. No. 2 Reduced Phillips Recess.
Furring
Size
8x2
Box Qty
4M
Plywood to
18-12 Gauge Steel Metal
Pilot Point Flat Head
Part No.
PP212
Size
10 x 2-1/2
Box Qty
2M
1/4”-1/2” Plywood to
18-12 Gauge Metal
Phillips Wafer Head
Part No.
PWD1034
PWD10100
PWD10114
PWD10112
Size
10 x 3/4
10 x 1
10 x 1-1-/4
10 x 1-1/2
20-14 Gauge Steel
Track to 20-16 Gauge Steel Studs
Pancake Framer
Part No.
PPH1058
Size
10 x 5/8
Box Qty
7.5M
For attaching metal lath in stucco and other
applications to 20-16 gauge steel studs.
No. 2 Reduced Phillips Recess.
Metal Lath
in Stucco
Low Profile Truss
Phillips Wafer Head With Wings 5/8”-3/4” Plywood
to 18-12 Gauge Metal
Phillips Flat Head With Wings
Phillips Wafer Head With Wings
Part No.
Size
PWD101716
10 x 1-7/16
Box Qty
3M
Strapping or Furring
Channel to Steel Joist
Phillips Pan Head
Part No.
PD812
PD834
PD8100
PD8114
PD1012
PD1058
PD1034
PD10100
Size
8 x 1/2
8 x 3/4
8x1
8 x 1-1/4
10 x 1/2
10 x 5/8
10 x 3/4
10 x 1
Box Qty
10M
10M
8M
4M
8M
7M
6M
5M
Metal Lath in Stucco
to 20-16 Gauge Steel Studs
Modified Truss
Part No.
MTD812
MTD834
MTD8100
MTD8114
MTD8158
MTD8178
MTD8200
MTD8212
MTD8300
MTD1034
Size
8 x 1/2
8 x 3/4
8x1
8 x 1-1/4
8 x 1-5/8
8 x 1-7/8
8x2
8 x 2-1/2
8x3
10 x 3/4
Box Qty
10M
10M
8M
6M
5M
3M
2.5M
2M
1.5M
5M
Low Profile 20-16 Gauge Framer
Low profile 20-16 gauge framer. No. 10 diameter
for added shear strength. With serrations to reduce
spin out. No. 2 Reduced Phillips Recess.
Steel Track
Low Profile Truss
Part No.
FT1012
FT1034
Size
10 x 1/2
10 x 3/4
Box Qty
8.5M
7.5M
7/8”-2-1/4” Plywood
to 16-12 Gauge Metal
Phillips Flat Head with Wings
Part No.
Size
PF10158
10 x 1-5/8
PF12200
12 x 2
PF12212
12 x 2-1/2
PF14234
14 x 2-3/4
PF14314
14 x 3-1/4
Box Qty
3M
2M
1M
1M
1M
Lap Siding,
Fiber Cement Board to Wood
Designed to fasten fiber cement board to wood.
Recommended for: Lap siding, fiber cement board
to wood, fiber cement roofing trim, flooring for tile
in kitchen and bath. Type 17 point.
No. 2 Reduced Phillips Recess flat head with nibs.
1,000 hour exterior all weather coating.
Sheet Metal
Metal to Metal and
Light Gauge Steel Framing
Hex Washer Head - 1/4” Drive
Part No.
Size
HWD812
8 x 1/2
HWD858
8 x 5/8
HWD834
8 x 3/4
HWD8100
8x1
HWD8114
8 x 1-1/4
HWD8112
8 x 1-1/2
HWD8200
8x2
Hex Washer Head With
5/16” Drive #4 Drilling Point
Box Qty
10M
10M
10M
8M
6M
4M
3M
Heavy gauge metal fastening, sheet metal panels
or clips to steel up to 3/8” thick. 1,000 hour
exterior all weather coating.
Hex Washer Head With
5/16” Drive #5 Drilling Point
Medium Gauge Sheet Metal
to Metal Framing
Hex Washer Head - 5/16” Drive
Part No.
Size
HWD1012
10 x 1/2
HWD1058
10 x 5/8
HWD1034
10 x 3/4
HWD10100
10 x 1
HWD10114
10 x 1-1/4
HWD10112
10 x 1-1/2
HWD10200
10 x 2
Heavy gauge metal fastening, sheet metal
panels or clips to steel up to 1/2” thick.
1,000 hour exterior all weather coating.
Box Qty
8M
7M
6M
5M
4M
3M
2M
Sheet Metal
Steel Stud
Hex Washer Head With
5/16” Drive #3 Drilling Point
Metal to metal fastening used in sheet metal to
attach purlins and channels to structural studs.
Commonly used in up to 5 gauge steel.
Hex Washer Head With
3/8” Drive #3 Drilling Point
Metal to metal fastening for heavy gauge metal
attachment. Up to 3/8” thickness
High-Hex Washer Head
With #3 Drilling Point
Fiber Cement Board Screws for Wood
Part No.
Size
Box Qty
FCBS114
8 x 1-1/4
8M
FCBS158
8 x 1-5/8
5M
Steel Stud
Metal to Metal, Purlins & Channels
to Structural Studs
Hex Washer Head - 5/16” Drive
Part No.
Size
HWD12034
12 x 3/4
HWD12100
12 x 1
HWD12114
12 x 1-1/4
HWD12112
12 x 1-1/2
HWD12200
12 x 2
HWD12212
12 x 2-1/2
HWD12300
12 x 3
Stitch/Lap With 5/16” Drive
#1 Drilling Point
Box Qty
5M
3M
3M
3M
2M
1M
1M
Fastening of overlapping heavy gauge metal
panels or sheets. Also available with neoprene
bonded washer.
Metal to Metal Heavy Gauge
up to 3/8” Thickness
Hex Washer Head - 3/8” Drive
Part No.
Size
HWD14034
14 x 3/4
HWD14100
14 x 1
HWD14114
14 x 1-1/4
HWD14112
14 x 1-1/2
HWD14200
14 x 2
HWD14212
14 x 2-1/2
HWD14300
14 x 3
HWD14400
14 x 4
HWD14500
14 x 5
HWD14600
14 x 6
Box Qty
4M
3M
2M
2M
1M
1M
1M
0.5M
0.5M
0.5M
For use in metal building applications where
moisture needs to be sealed out by using a
neoprene bonded washer.
Sheet Metal
Penetrate Multiple Layers
of Light Gauge Steel
Primarily used for hanging
suspended ceiling grid into
wood joists.
Wood Joist
Fiber
Cement Board
Hex Washer Head With
Neoprene Bonded Washer,
3/8” Drive #3 Drilling Point
For attaching roofing panels and wall panels to
steel studs or purlins and over-lapping exterior
sheets.
Eye Lag Screws - Sharp
Part No.
EL3
EL4
EL5
Size
1/4 x 3
1/4 x 4
1/4 x 5
Wood Working Screws
Box Qty
1M
1M
1M
An all around wood to wood product screw for
building cabinets, furniture, etc...where smooth
counter-sinking via the nibbed head and the antisplitting action of the type 17 point are needed.
Can also be used to attach wood to wood
products to light gauge steel (25-20 gauge). Type
17 point. Combo Drive with nibs. Zinc plated.
Particle Board
Heavy Gauge Metal Fastening
Sheet Metal to Steel
Hex Washer Head - 5/16” Drive #5 Drilling Point
Part No.
Size
Box Qty
X512114
12 x 1-1/4
2M
X512112
12 x 1-1/2
2M
X512200
12 x 2
2M
Overlapping Heavy
Metal Panels or Sheets
Stitch/Lap - 5/16” Drive #1 Drilling Point
Part No.
Size
Box Qty
LAP1478
14 x 7/8
3.5M
LAP1478S (w/washer)
14 x 7/8
3.5M
Roofing & Wall Panels to
Steel Studs
Hex Washer Head w/Neo - 5/16” Drive
Part No.
Size
Box Qty
HDW1034
10 x 3/4
6M
HDW10100
10 x 1
5M
HDW10114
10 x 1-1/4
4M
HDW10112
10 x 1-1/2
3M
HDW10200
10 x 2
2M
HDW1234
12 x 3/4
5M
HDW12100
12 x 1
3M
HDW12114
12 x 1-1/4
3M
HDW12112
12 x 1-1/2
3M
HDW12200
12 x 2
2M
High-Hex Washer Head With Serrations
Part No.
Size
Box Qty
HH1034
10 x 3/4
6.5M
Layers of
Sheet Metal
Particle Board Screws
Hang Ceiling Grid
into Wood Joists
Hex Washer Head - 5/16” Drive #4 Drilling Point
Part No.
Size
Box Qty
X41278
12 x 7/8
4M
Hex Washer Head With Neoprene Bonded
Washer, 5/16” Drive #3 Drilling Point
Steel Stud
Acoustical Eye Lag Screws
Eye Lag Screws- Sharp Point
For penetrating multiple layers of light steel –
extra high hex for added strength. With serrations
to reduce spin out.
Heavy Gauge Sheet Metal Panels
to Steel up to 3/8” Thick
Steel
Steel Stud
Fiber Cement Board Screws
For Wood
Metal to metal fastening used in sheet metal and
light steel framing. Very common in HVAC duct
work assembly.
Steel Stud
Metal
For attaching 5/8” - 3/4” plywood to 18-12 gauge
metal. Wings eliminate pre-drilling of wood. No. 2
Reduced Phillips Recess.
Hex Washer Head With
1/4” Drive #2 Drilling Point
Metal to metal fastening used in medium gauge
metal to metal framing. Commonly used by sheet
metal and HVAC contractors and fabricators
Steel Joist
Modified Truss
Box Qty
8M
5M
4M
4M
1-800-676-6777
www.primesourcebp.com
Hex Washer Head With
5/16” Drive #3 Drilling Point
Phillips Pan Head
Plywood to
20-14 Gauge Steel Metal
An Itochu Company
Heavy Gauge Metal To Metal Screws Heavy Gauge Metal To Metal Screws
Steel Stud
Box Qty
Box Qty
5M
Flat Head Phillips
A re-usable screw with high holding power.
For use in light duty anchoring, door and
window frames, thresholds, plumbing straps
and electrical conduits. Taps it’s own thread
in concrete, brick and other masonry
products. Drill the starter hole, drive the
screw and procedure is complete.
Penetrates Sheet Metal
For attaching 7/8” - 2-1/4” plywood to 16-12
gauge metal. No. 3 point. Wings eliminate predrilling of wood. No. 2 or 3 Phillips Recess.
Concrete Screw Anchors
Hex Washer Head Slotted
Self-piercing needle point penetrates sheet metal
from 0.0209 to 0.0358. Twin lead threads assure
fast action and reduce driving torque and stripout problems. Zinc plated.
Sheet Metal
Light Gauge
Steel Stud
Box Qty
10M
10M
8M
5M
4M
3M
2M
2M
10M
10M
8M
5M
4M
3M
2M
2M
Metal
Light Gauge
Steel Stud
Wood Trim & Base Over
Gypsum Board to
Light Gauge Steel Studs
Size
6x1
6 x 1-1/8
6 x 1-1/4
6 x 1-5/8
6 x 1-7/8
8 x 2-3/8
8 x 2-5/8
8x3
6x1
6 x 1-1/8
6 x 1-1/4
6 x 1-5/8
6 x 1-7/8
8 x 2-3/8
8 x 2-5/8
8x3
Pan Framer
Steel Stud
For attaching 1/4”-1/2” plywood to 18-12 gauge
metal. No. 2 Reduced Phillips Recess.
Trim Head
Bugle Head
Part No.
SDZ100
SDZ118
SDZ114
SDZ158
SDZ178
SDZ238
SDZ258
SDZ300
SD100*
SD118*
SD114*
SD158*
SD178*
SD238*
SD258*
SD300*
*Black Phosphate
Wood Trim Over Gypsum
to 20-14 Gauge Metal
Gypsum Board to Wood Studs
For attaching gypsum board to wood studs.
Bugle head No. 2 Reduced Phillips Recess.
Self-Drilling Steel Framing Screws
Hex Washer Head w/Neo - 3/8” Drive
Part No.
Size
Box Qty
HDW1434
14 x 3/4
4M
HDW14100
14 x 1
3M
HDW14114
14 x 1-1/4
2M
HDW14112
14 x 1-1/2
2M
HDW14200
14 x 2
1M
HDW14212
14 x 2-1/2
1M
HDW14300
14 x 3
1M
Wood Working Screws
Wood to Wood All Around
Cabinet and Furniture Screw
Particle Board Screws, Combo Drive
Part No.
Size
PBP08114
8 x 1-1/4
PBP08112
8 x 1-1/2
PBP08158
8 x 1-5/8
PBP08200
8x2
PBP08212
8 x 2-1/2
PBP08300
8x3
Roofing & Wall Panels
to Steel Studs or Purlins
Cabinet Screws
Cabinets to Wood
or Light Gauge Studs
Use for attaching cabinets to wood or light gauge
(25-20 gauge) steel studs. Combo drive allows
fastener to remain on bit while cabinet is held in
place for attachment. Type 17 point. Yellow zinc.
Box Qty
6M
5M
5M
3M
2.5M
2M
Cabinet Screws, Yellow Zinc
Part No.
Size
CBS238
8 x 2-3/8
CBS300
8x3
Box Qty
2.5M
2M
Cabinet
Cement Board
Wood
Wood
Coarse Screws
Wood Stud
Self-Drilling With Nibs
Designed to fasten cement board to metal studs
(20-14 gauge). Nibs under the head allow it to
countersink into the board. No. 2 Reduced
Phillips Recess with nibs. 1,000 hour exterior all
weather coating.
Cement Board
For Wood
Designed to fasten fiber cement board in areas
requiring high wind shear and pull-through
resistance. Recommended for: Lap siding, fiber
cement board to steel studs, fiber cement roofing
trim, flooring for tile in kitchen and bath. Type 17
point. No. 2 Reduced Phillips Recess wafer head
with nibs. 1,000 hour exterior all weather coating.
Cement Board
to Steel Studs
Self-Drilling Cement Board Screws
Part No.
Size
CBD114
8 x 1-1/4
CBD158
8 x 1-5/8
Box Qty
5M
5M
For Steel
Designed to fasten fiber cement board to steel
studs (0.100” max). Wings allow cutter head to
countersink flush with fiber cement board.
No. 2 Reduced Phillips Recess flat head with nibs.
1,000 hour exterior all weather coating.
For Steel
Steel Stud
Wood
Designed to fasten fiber cement board in areas
requiring high wind shear and pull-through resistance
(0.100” max. steel stud). Recommended for: Lap
siding, fiber cement board to steel studs, fiber cement
roofing trim, flooring for tile in kitchen and bath.
No. 2 Reduced Phillips Recess wafer head with nibs.
1,000 hour exterior all weather coating.
Fiber Cement Board to
Wood for Areas in High Wind
Fiber Cement Board Screws for Wood
Part No.
Size
Box Qty
FCBSS114
8 x 1-1/4
8M
FCBSS158
8 x 1-5/8
5M
Fiber Cement Board
to Steel Studs
Fiber Cement Board Screws for Steel
Part No.
Size
Box Qty
FCBD114
8 x 1-1/4
5M
FCBD158
8 x 1-5/8
5M
FCBD214
8 x 2-1/4
2.5M
Hardwood Screws
Also called “Face Frame Screws”. Used in hardwood
cabinet and furniture making. Type 17 point.
Pan head Combo Drive. Black phosphate.
Eye Lag Screws- Self Drilling Hang Ceiling Grid
into Metal Joist
Primarily used for hanging
suspended ceiling grid into
metal studs.
Eye Lag Screws - Self Drilling
Part No.
Size
ELDZ2
1/4 x 2
ELDZ3
1/4 x 3
Hardwood Cabinet &
Furniture Making
Hardwood Screws, Combo Drive
Part No.
Size
PHC6114
6 x 1-1/4
PHC6112
6 x 1-1/2
Use for attaching wood to wood. Recommended
for cabinet and general wood-working where the
gold/yellow head meets user’s cosmetic
requirements, an interior fastener not
recommended for outdoor decking. Bugle head
No. 2 Reduced Phillips Recess. Yellow zinc.
Box Qty
6M
6M
Wood
Hardwood
Box Qty
1M
1M
Wood to Wood Cabinet
and General Wood Working
Hardwood
Coarse Screws, Yellow Zinc
Part No.
Size
GS114
6 x 1-1/4
GS112
6 x 1-1/2
GS158
6 x 1-5/8
GS200
7x2
GS214
7 x 2-1/4
GS212
8 x 2-1/2
GS300
8x3
GS312
10 x 3-1/2
GS334
10 x 3-3/4
GS400
10 x 4
Box Qty
8M
6M
5M
3.5M
3M
2.5M
2M
1M
1M
1M
Wood
Metal Joist
Fiber Cement Board to
Steel Studs for Areas in High Wind
Fiber Cement Board Screws for Steel
Part No.
Size
Box Qty
FCBDS114
8 x 1-1/4
5M
FCBDS158
8 x 1-5/8
5M
FCBDS214
8 x 2-1/4
3M
© 2003, PrimeSource
1
2
3
4
5
PROREF
06/03