The SafeLED TE-E is an omni-directional LED elevated light. Suitable for airfield lighting.
Applications include:
Taxiway Edge - Blue
Intermediate Holding Position - Yellow
ICAO: Annex 14 Vol I Paragraphs 5.3.17
Configuration A, High Intensity.
FAA: AC 150/5345-46 (last edition) and
Engineering Brief No. 67C.
The SafeLED light has an integrated fail open technology which means that the CCR can detect any failure in the LED or the electronics
(6.6A version).
The LED light follows the same light intensity curve as a corresponding halogen lamp with different brightness levels at the CCR (6.6A version). This feature allows mixed circuits with halogen and LED fittings. There is no need for updating previously installed AFL infrastructure when installing SafeLED.
The SafeLED is designed for use in harsh environments. The electronics components are encapsulated in waterproof polyurethane.
Built-in over voltage surge and lightning protection.
The optical head of the fitting can easily be adjusted by 3 Allen screws for accurate leveling.
Castings are powder coated and fittings are stainless steel.
Designed to allow easy maintenance.
Characteristic
Series Circuit:
Input current (A) from series circuit, 2.8 –6.6A
Min Max
2.5 7.1
Parallel version:
50-260VAC (50 or 60Hz) Fix brightness
Power Consumption (W)
Total Power consumption (W) @ 6.6A
RMS
Total Power consumption (W) @ 230 VAC
Note: Power Factor (PF) typically 1.0
Operating humidity range (%) 0 100
Operating temperature range (C°)
Power Supply:
-55 +65
An integrated, encapsulated electronic converter.
Two-pole FAA plug for connection to one transformer for Series Circuit.
Cable 2 x 1 mm 2 , length 0.8 m for VAC version.
7.5
7.5
Optics:
Colour:
1 LED inserted in an optical system. Lifetime of LED depending on operation.
Obtained directly by the LED complying with ICAO and FAA requirements.
LAS-DB-087 Rev. A Jan. 2012
Liberty Airport Systems Inc. C5-3375 North Service Road, Burlington, ON Canada
Phone: 905-631-1597 Fax: 905-631-5387 www.LibertyAirportSystems.com
1

Finish:
Fixing &
Installation:
Body and support in aluminum alloy casting. Painted in aviation yellow. All fastenings are stainless steel. The cap is blue or yellow depending on the application.
Support fixing thread (2” NPS, 2” BSP) can be mounted on a tripod stand, conduit elbow or FAA base plate.
Adjustment:
Height:
Horizontal adjustment obtained using a set of Allen screws.
Less than 300 mm as standard. Also available with adjustable leg.
IP55 Protection:
Net weight: 2.3 kg
CCR detection: Open secondary failure mode for series circuit version only.
Note: For more information contact Liberty Airport Systems.
SafeLED
Location:
TE - Taxiway Edge
TH - Intermediate holding position
Fitting:
E - Elevated
Type:
O - Omni-directional
Colour:
B - Blue
Y - Yellow
Fixing Thread:
NPS - 2” NPS
BPS - 2” BSP
Power Supply:
SC - Series Circuit 2.8A - 6.6A
PC - Parallel Circuit 230 VAC
5
6
7
8
9
10
No Description
1 Blue or yellow top cap
2 Glass dome
3
4
Gasket
Power converter with coloured LED
Body
Compression packer
Cone
Connector cord
Level adjustment screws
Frangible stand
LAS-DB-087 Rev. A Jan. 2012
Liberty Airport Systems Inc. C5-3375 North Service Road, Burlington, ON Canada
Phone: 905-631-1597 Fax: 905-631-5387 www.LibertyAirportSystems.com
2