SWB-400-2
7/16"
(11.1 mm)
7/8"
(22.2 mm)
WALL BASE 4-1/16" TALL
SAMPLE SPECIFICATION
specify as: SOFTFORMS®
Model # SWB-400-2
Pittcon ÍÑÚÌÚÑÎÓÍr LLC
6409 Rhode Island Avenue
Riverdale, MD 20737
(800) 637-7638
(301) 927-1000
Fax: (301) 699-8690
3330 W. Flower Street
Phoenix, AZ 85017
(800) 637-7638
(602) 233-9100
Fax: (602) 233-9400
The extruded aluminum profile shall incorporate a continuous
integral fin for surface contact to conventionally installed gypsum
drywall. The fins shall be 7/8" wide and shall be tapered to the edge.
The tapered fins shall be punched with holes staggered to accept
standard screw fastening. A series of continuous grooves shall be
extruded into the face of the fins to provide greater bonding surface.
The extruded profiles shall be primed with corrosion-resistant
primer compatible with materials normally in use in conjunction with
commercial interiors, i.e.: joint compound, latex and enamel paints,
and wall covering adhesives.
4-1/16"
(103.2 mm)
MATERIAL: Aluminum alloy............6063 T5 or equal
Finish..............................Factory primed
EXAMPLE DETAIL
For use with conventional metal stud construction and 1/2" GPDW only.
The SWB-400-2 will permit construction of a wall base which provides a
recessed surface to receive vinyl or other cove strip material. The bottom
is thinned to allow scribing to irregular surfaces. Screws through the
grooved fins must always engage metal or wood substructure to ensure
proper installation.
SECTION SWB-400-2
WALL BASE 4-1/16"
NO SCALE
FOR 1/2" GPDW ONLY
1/2" GPDW
METAL STUD
TAPE &
SPACKLE
TAPE &
SPACKLE
PANEL ADHESIVE
CHANNEL
RUNNER
SWB-400-2
NO SCALE
BASE @ STUD WALL
WALL SECTION
All details, methods and specifications are the exclusive property of
Pittcon Softformsr LLC. Pittcon reserves the right to change any
specifications or details without prior notification. All Softformsr
profiles are available in standard 10' lengths ±1/8" (2.048 M). Other
lengths are available as special order items. For custom shapes,
sizes, or for special finishes, please contact the factory or your
nearest Pittcon sales representative.
r
© 2007 第½±² ÍÑÚÌÚÑÎÓÍ ÔÔÝò
PREFORMED ARCHITECTURAL PROFILES
FOR DRYWALL CONSTRUCTION
SR 29
9/16"
(14.3 mm)
SWB-400-8
7/8"
(22.2 mm)
WALL BASE 4-1/16" TALL
SAMPLE SPECIFICATION
specify as: SOFTFORMS®
Model # SWB-400-8
Pittcon ÍÑÚÌÚÑÎÓÍr LLC
6409 Rhode Island Avenue
Riverdale, MD 20737
(800) 637-7638
(301) 927-1000
Fax: (301) 699-8690
3330 W. Flower Street
Phoenix, AZ 85017
(800) 637-7638
(602) 233-9100
Fax: (602) 233-9400
The extruded aluminum profile shall incorporate a continuous
integral fin for surface contact to conventionally installed gypsum
drywall. The fins shall be 7/8" wide and shall be tapered to the edge.
The tapered fins shall be punched with holes staggered to accept
standard screw fastening. A series of continuous grooves shall be
extruded into the face of the fins to provide greater bonding surface.
The extruded profiles shall be primed with corrosion-resistant
primer compatible with materials normally in use in conjunction with
commercial interiors, i.e.: joint compound, latex and enamel paints,
and wall covering adhesives.
4-1/16"
(103.2 mm)
MATERIAL: Aluminum alloy............6063 T5 or equal
Finish..............................Factory primed
EXAMPLE DETAIL
For use with conventional metal stud construction and 5/8" GPDW only.
The SWB-400-8 will permit construction of a wall base which provides a
recessed surface to receive vinyl or other cove strip material. The bottom
is thinned to allow scribing to irregular surfaces. Screws through the
grooved fins must always engage metal or wood substructure to ensure
proper installation.
SECTION SWB-400-8
WALL BASE 4-1/16"
NO SCALE
FOR 5/8" GPDW ONLY
5/8" GPDW
METAL STUD
TAPE &
SPACKLE
TAPE &
SPACKLE
PANEL ADHESIVE
CHANNEL
RUNNER
SWB-400-8
NO SCALE
BASE @ STUD WALL
WALL SECTION
All details, methods and specifications are the exclusive property of
Pittcon Softformsr LLC. Pittcon reserves the right to change any
specifications or details without prior notification. All Softformsr
profiles are available in standard 10' lengths ±1/8" (2.048 M). Other
lengths are available as special order items. For custom shapes,
sizes, or for special finishes, please contact the factory or your
nearest Pittcon sales representative.
r
© 2008 第½±² ÍÑÚÌÚÑÎÓÍ ÔÔÝò
PREFORMED ARCHITECTURAL PROFILES
FOR DRYWALL CONSTRUCTION
SR 30
SWBR-400
CUSTOM WALL BASE W/ REVEAL
1/2" (12.7 mm) 1/2" GPDW
5/8" (15.9 mm) 5/8" GPDW
7/8"
(22.2 mm)
SAMPLE SPECIFICATION
specify as: SOFTFORMS®
Model # SWBR-400-2
Model # SWBR-400-8
1/2"
(12.7 mm)
NOMINAL
Pittcon ÍÑÚÌÚÑÎÓÍr LLC
6409 Rhode Island Avenue
Riverdale, MD 20737
(800) 637-7638
(301) 927-1000
Fax: (301) 699-8690
5/8"
(15.9 mm)
NOMINAL
3330 W. Flower Street
Phoenix, AZ 85017
(800) 637-7638
(602) 233-9100
Fax: (602) 233-9400
The formed aluminum profile shall incorporate a continuous integral fin for
surface contact to conventionally installed gypsum drywall. The fins shall
be 1-3/8" wide nominal. The formed profile shall be primed with corrosionresistant primer compatible with materials normally in use in conjunction
with commercial interiors, i.e.: joint compound, latex and enamel paints,
and wall covering adhesives.
MATERIAL: Aluminum alloy.............3003 H-14 or equal
Finish...................................Factory primed
Metal thickness...................... .062" typical
3-9/16"
(90.5 mm)
EXAMPLE DETAIL
For use with conventional metal stud construction and 1/2" or 5/8" GPDW.
The custom SWBR-400 permits the construction of a flush wall base with
a decorative 1/2" wide reveal. It is available for use with either 1/2" or 5/8"
thick GPDW. An optional backer of MDF can be factory attached to the
back of the base, or wood blocking can be field applied. Screws through
the fins must always engage metal or wood substructure to ensure proper
installation.
1/2" OR
5/8" GPDW
TAPE &
SPACKLE
SWBR-400-2 (Shown)
NO SCALE
WALL BASE
WITH 1/2" REVEAL
TAPE &
SPACKLE
SWBR-400-2 OR
SWBR-400-8
OPTIONAL
BACKING
MATERIAL
SWBR-400
NO SCALE
WITH STUD WALL
SECTION
All details, methods and specifications are the exclusive property of
Pittcon Softformsr LLC. Pittcon reserves the right to change any
specifications or details without prior notification. All Softformsr
profiles are available in standard 10' lengths ±1/8" (2.048 M). Other
lengths are available as special order items. For custom shapes,
sizes, or for special finishes, please contact the factory or your
nearest Pittcon sales representative.
© 2008 第½±² ÍÑÚÌÚÑÎÓÍr ÔÔÝò
PREFORMED ARCHITECTURAL PROFILES
FOR DRYWALL CONSTRUCTION
SR 31