3/4"
(19.01 mm)
PT-4
PERIMETER TRIMS
Specify as: SOFTFORMS® Perimeter Trim
Specify as: Pittcon Drywall Molding
Model No. PT-4
Model No.
MATERIAL: Aluminum alloy............6063 T5 or equal
Finish.......................
PittconT5
White
MATERIAL: Aluminum
alloy............6063
or equal
Finish..............................Factory primed
3 7/8"
(98.4 mm)
The extruded aluminum profile shall incorporate a continuous
The
extruded
profile
shall incorporate
continuous
integral
fin topaluminum
and bottom
for surface
contact to aconventionally
integral
finacoustical
for surface
contact
installed
gypsum
installed
ceiling
tiles,toorconventionally
a separate flange
for attachment
drywall.
The fins
shall be
7/8"fins
wideshall
and shall
be tapered
to the
edge.
to gypsum
drywall.
The
be 3/4"
wide and
shall
be
The
taperedtofins
be punched with holes staggered to accept
untapered
theshall
edge.
standard screw fastening. A series of continuous grooves shall be
extruded
theareas
face of
the fins
to provide greater
Two or into
more
shall
be incorporated
into bonding
the backsurface.
of each
The
extruded
be primed
with corrosion-resistant
extrusion,
withprofiles
a seriesshall
of continuous
extruded
grooves to provide
primer
compatible
materials
normally in use in conjunction with
a greater
bondingwith
surface
for joinery.
commercial interiors, i.e.: joint compound, latex and enamel paints,
and wall covering adhesives.
The extruded profiles shall be factory painted standard Pittcon
Whtie.
TYPICAL SECTION
NO SCALE
Perimeter Trim
SELECTING YOUR PROFILE FROM THE SOFTFORMS®
PT-4 Radiused Trim Available in Inside and Outside Radii.
PT SERIES OF ALUMINUM EXTRUSIONS
Can be Combined to Form Serpentine Shapes.
Minimum Radii Dependent on Trim Model. Consult
PT Model
Height at Face
Minimum Radii
PT-4
4-7/8" (98.4 mm)
Factory.
12" Single Radius
Optional Factory Finishes
•
•
•
•
•
•
•
•
Face clad with mirror finish stainless steel
Face clad with matte or high gloss plastic laminate finishes
Face clad with Belbien® Vinyl laminate finishes
Face clad with finished or unfinished wood veneers
Painted in a high gloss polyurethane finish
Painted in a Coraflon® fluoropolymer finish
Clear satin, bronze, or black anodized finish
Primed finish for field painting
PT-4 TRIM
Used as a Trim Collar for
Column Penetration, and
Border at Stepped Ceiling.
Coraflon® is a registered trademark of PPG Industries, Inc.
© 2008 Pittcon Industries
East
West
3330 W. Flower Street
Phoenix, AZ 85017
Phone: (602) 233-9100
Fax: (602) 233-9400
DIVISION OF PITTCON ARCHITECTURAL METALS, LLC
800 637-7638
6409 Rhode Island Ave.
Riverdale, MD 20737
Phone: (301) 927-1000
Fax: (301) 699-8690
17
PT SERIES
PT-2
PT-DWTB
Taping Fin
2-1/2"
PT-KE
PERIMETER TRIMS
6"
An extruded aluminum perimeter trim offering flexibile design and
ease of installation. PT TRIMS can be used with acoustical or
drywall ceilings, and are compatible with all major exposed grid
systems. Create height transitions in your ceiling with custom
serpentine, convex, or concave configurations, or as a lighting cove
in conjunction with recessed lighting, and Pittcon's own series of
CC-1-TF ceilng coves.
3/4"
3/4"
PT-2
3/4"
PT-DWTF
Taping Fin
12"
9-13/16"
3/4"
7-13/16"
5-25/32"
3/4"
3-7/8"
PT Trim
PT Trim
3/4"
3/4"
2-1/8"
Remove Hanging Tab
Prior to Installing Connector Clip
PT-2
PT-6
PT-8
PT SERIES PROFILES
NO SCALE
Reveal
in Front
Tape &
Spackle
Tape &
Spackle
w/PT-DWTB Taping Fin
w/PT-DWTF Taping Fin
Reveal in
Bottom
PT-4
3/4"
PT-10
PT-12
SECTIONS
Hanger Wire
(available through Pittcon)
T-Bar
Connector
Type PT-8
Perimeter Trim
Support Grid
(available through
Pittcon)
6”
PT-KE Knife Edge Trim
(7-13/16" tall)
Light Fixture
(by others)
Type PT-6
Perimeter Trim
5-25/32"
3/4"
Twist & Lock into
Back of PT Trim
T-Bar Connector Clip. Five provided
per 10' length of PT Trim.
(Patent # US 6438921 BA)
Pittcon Industries Division Pittcon Architectural Metals, LLC
6409 Rhode Island Avenue
Riverdale, Maryland 20737
(800) 637-7638 , (301) 927-1000
Fax: (301) 699-8690
c 2008 Pittcon Industries
3330 W. Flower Street
Phoenix, Arizona 85017
(800) 637-7638 , (602) 233-9100
Fax: (602) 233-9400
T-Bar Ceiling Grid
(available through
Pittcon)
Fabricated with Pride in
Riverdale, Maryland-U.S.A.