SCS-3X
1"
(25.4 mm)
Nominal
1/2"
(12.7 mm)
Nominal
CUSTOM CORNER STEP
SAMPLE SPECIFICATION
specify as: SOFTFORMS®
Model # SCS-3X
2"
(50.8 mm)
TYP
Pittcon ÍÑÚÌÚÑÎÓÍ LLC
r
6409 Rhode Island Avenue
Riverdale, MD 20737
(800) 637-7638
(301) 927-1000
Fax: (301) 699-8690
3330 W. Flower Street
Phoenix, AZ 85017
(800) 637-7638
(602) 233-9100
Fax: (602) 233-9400
The formed
extruded
aluminum
profile
incorporate
a continuous
aluminum
profile
shall shall
incorporate
a continuous
integral
integral
fin for surface
contact
to conventionally
fin
for surface
contact to
conventionally
installedinstalled
gypsum gypsum
drywall.
drywall.
The profile
fins shall
be 7/8"
wide and
shall
be tapered to theprimer
edge.
The
formed
shall
be primed
with
corrosion-resistant
The taperedwith
fins shall
be punched
withinholes
to accept
compatible
materials
normally
use staggered
in conjunction
with
standard screw
commercial
interiors,
fastening.
i.e.: joint
A series
compound,
of continuous
latex and
grooves
enamelshall
paints,
be
extruded
into the face
of the fins to provide greater bonding surface.
and
wall covering
adhesives.
The extruded profiles shall be primed with corrosion-resistant
primer compatible with materials normally in use in conjunction with
MATERIAL:
Aluminum
alloy................3003
or paints,
equal
commercial interiors,
i.e.: joint
compound, latex andH-14
enamel
Finish......................................Factory
primed
and wall covering
adhesives.
2"
(50.8 mm)
TYP
NOTE: Larger and
Smaller Sizes Are
Available.
1-1/2"
(38.1 mm)
Nominal
Metal Thickness........................ .090" typical
MATERIAL: Aluminum alloy............6063 T5 or equal
Note:
Other thicknesses ranging from .062" to .125" are availFinish..............................Factory
primed
able upon
request, with some restrictions applying.
Check
factory for your needs.
SCS-3X
NO SCALE
TRIPLE CORNER STEP
SECTION
EXAMPLE DETAIL
For use with 1/2" or 5/8" GPDW ceilings.
The SCS-3X may be used horizontally or vertically to create a
multistep corner in widths specified. Screws through the tapered
fins must always engage metal or wood substructure to ensure
proper installation.
TAPE &
SPACKLE
SCS-3X
TAPE &
SPACKLE
METAL
STUDS
1/2" OR 5/8"
GPDW
SCS-3X
NO SCALE
STUD WALL
PLAN/SECTION
All details, methods and specifications are the exclusive property of Pittcon
Softformsr LLC. Pittcon reserves the right to change any specifications or
details without prior notification. All Softformsr profiles are available in
standard 10' lengths ±1/8" (2.048 M). Other lengths are available as special
order items. For custom shapes, sizes, or for special finishes, please contact
the factory or your nearest Pittcon sales representative.
r
© 2008 第½±² ÍÑÚÌÚÑÎÓÍ ÔÔÝ
r
PREFORMED ARCHITECTURAL PROFILES
FOR DRYWALL CONSTRUCTION
SO 49