Sensor Switch - Motions Light Sensors

advertisement
nPOD GFX
GRAPHIC WALLPOD
SPECIFICATIONS
FEATURES
3.5” Full-color Touch Screen (Diagonal)
Provides up to 16 On/Off/Dim Controls
Provides up to 16 Scene Controls
Enables User Customization of all Presets and On/Off/Dim Controls
Enables Programming of Switch Tracking Channels of Devices in Zone
Mounts to a Single Gang Switch Box
Front Assessible Micro-USB Connector
for Simple Laptop Connectivity
Optional Password Protection for Controls and Setup Screens
Customizable Screen Saver Image
Onboard Help Screens
PHYSICAL SPECS
SIZE 5.06” H x 3.50” W x 0.69” D
(12.85 cm x 8.89 cm x 1.75 cm)
WEIGHT 6 oz
MOUNTING Single-Gang Low Voltage
Switch Box or Ring
MOUNTING HEIGHT (recommended)
60 in (152 cm)
COLOR
White, Ivory, Black, Light Almond, Gray
NLIGHT NETWORK CONNECTION
2 RJ-45 Ports
The Graphic WallPod (nPOD GFX) provides an
elegant and sophisticated user control to any
nLight controlled space. Its 3.5”, high resolution
touch screen is easy to view and simple to use.
CONTROL FUNCTIONALITY
The Graphic WallPod fundamentally operates as
a multi-channel user control device. It is configurable to display up to 16 controls
(either on/off, or on/off/dim style) as well as 16 scene selection buttons. Each
screen displays two controls or groups of 4 scenes with simple left/right paging
style navigation between screens.
A control is activated simply by touching the screen. The unit instantly
communicates the desired action throughout the connected zone of nLight
devices. All devices programmed to listen for (track) commands from switches on
a respective channel will react by turning connected lights on/off, or by dimming
them accordingly. To facilitate simple commissioning of a zone, the Graphic
WallPod automatically discovers and displays a list of all devices with relays and
dimming outputs within its zone. The switch tracking settings on these devices
can then be modified from the Graphic WallPod.
Lighting presets consist of a combination of user configured settings (on/off or
dim level) for each control that can be activated via a single button. Pressing the
applicable button then instantly communicates the group of presets out to the
devices in the zone.
ELECTRICAL SPECS
INPUT VOLTAGE 15-24 VDC
POWER CONSUMPTION 60mA
WIRES None
POWER SUPPLY (included)
PS-150 (347) via Terminal Connections
ENVIRONMENTAL SPECS
OPERATING TEMP
14º to 160º F (-10º to 71º C)
RELATIVE HUMIDITY
20 to 75% non-condensing
SILICONE FREE
ROHS COMPLIANT
OTHER
Title 24 System Component
5 Year Warranty
Assembled in the U.S.A.
SETUP & CONFIGURATION
Setup and configuration of the Graphic WallPod is provided by accessing
password protected screens. Through these screens, lighting presets can be
created and several device parameters can be easily modified. Help screens are
also provided to guide users. SensorView software can also be used to edit the
Graphic WallPod’s configuration.
• Number of Controls/Channels (1-16) • Password Controls
• Type of Control (On/Off or On/Off/Dim)
• Custom Name of each Control
• Screen Saver (Enable / Disable) • Screen Saver Time Out Period
• Screen Saver Brightness Level %
• Screen Saver Image (none / nLight Logo / user provided .jpeg image)
ORDERING INFO
nPOD GFX [POWER SUPPLY VOLTAGE] [COLOR]
OPTIONS
VOLTAGE
Blank = 120/277 VAC
347 = 347 VAC
Required power supply, PS 150 (347), is included
COLOR
WH = White GY = Gray
IV = Ivory
BK = Black
AL = Light Almond
Revised 06.27.14 © 2014 Sensor Switch
HARDWARE FEATURES
There are two RJ-45 ports on the rear of the Graphic WallPod for
CAT5e connection to other nLight-enabled devices. Additionally, there
is a set of power terminals where low voltage power (from the provided
PS 150 power supply module) is connected.
N
RED
RE
BL
BLK
PS 150 (347)
H
WHT
BLK (120 V) / ORN (277 V)
RED (347 V)
The Graphic WallPod flush mounts to a single-gang switch box. The
housing has two sliding panels that cover the mounting screws, an
indicator LED, a reset button, and a micro-USB style port. This port is
provided as a convenient location for which to connect a laptop running the nLight SensorView software. While not needed
for setup and configuration of the Graphic WallPod, SensorView is required to perform advanced configuration and firmware
upgrades of devices within the Graphic WallPod’s local zone. Remote access and control is available via SensorView if the
zone is connected to an nLight backbone with a Gateway. Note: no power is used/supplied from/to the nLight bus.
POWER STATUS LED
MICRO-USB
PORT
SCREW HOLES
POWER TERMINALS
FRONT
BACK
RESET BUTTON
NLIGHT NETWORK
PORTS (RJ-45)
SELECTED CONFIGURATION SCREENS
INSTALLATION / STARTUP
• Before mounting, connect Class 2 low voltage wires from power supply to power terminal connections (polarity insensitive)
• Verify unit has power by observing screen and/or LED
• Connect CAT-5e cable(s) from local zone of nLight-enabled devices to RJ-45 port(s)
• Unit will begin discovering connected devices (indicated by on-screen message box)
• Mount unit to standard single gang switch box (screws provided)
• To access configuration screens, touch lock icon in upper left. Default password is “1234”
• Pressing reset button twice is equivalent to repowering unit
• Press reset button three times to restart unit in screen-calibration mode
WARRANTY: Sensor Switch warrants these products to be free of defects in manufacture and workmanship for a
period of 60 months. Sensor Switch, upon prompt notice of such defect, will, at its option, provide a Returned Material
Authorization number and repair or replace returned product.
LIMITATIONS AND EXCLUSIONS: This Warranty is in full lieu of all other representation and expressed and implied
warranties (including the implied warranties of merchantability and fitness for use) and under no circumstances shall
Sensor Switch be liable for any incidental or consequential property damages or losses.
TN-504-01
900 Northrop Road, Wallingford, CT 06492 • 1.800.PASSIVE • FX 203.269.9621 • www.sensorswitch.com
Download