MMBT5401 REVERSE VOLTAGE – 150 Volts FORWARD CURRENT – 0.5 Amperes PNP GENERAL PURPOSE TRANSISTOR SOT-23 FEATURES • Surface mount device • Simplifies circuit design • For switching and amplifier applications. MECHANICAL DATA • Case: SOT-23 plastic • Lead Free in RoHS 2002/95/EC Compliant • Case material: “Green” molding compound, UL flammability classification 94V-0, (No Br. Sb. CI) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. ABSOLUTE RATINGS PARAMETER SYMBOL VALUE UNIT Collector-emitter voltage VCEO - 150 Vdc Collector-base voltage VCBO - 160 Vdc Emitter-base voltage VEBO - 5.0 Vdc IC - 500 mAdc SYMBOL MAX. UNIT PD 225 mW RthJA 556 °C/W PD 300 mW Thermal resistance junction to ambient RthJA 417 °C/W Junction and storage temperature rang TJ ,TSTG -55 to +150 °C Collector current-continuous THERMAL CHARACTERISTICS PARAMETER Total device dissipation FR-5 board (Note 1) @ TA = 25°C Thermal resistance junction to ambient Total device dissipation alumina substrate (Note 2) @ TA = 25°C Note: 1. FR-5 = 1.0 * 0.75 * 0.062 in. 2. Alumina = 0.4 * 0.3 * 0.024 in 99.5% alumina. REV-0, MAY.-2015, KSPR21 ORDERING INFORMATION DEVICE MARKING SHIPPING MMBT5401 2L 3000/ Tape & Reel ELECTRICAL CHARACTERISTIC MMBT5401 OFF CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. MAX UNIT Collector-base breakdown voltage IC = - 100 µAdc, IE = 0 V(BR)CBO - 160 -- Vdc Collector-emitter breakdown voltage IC = - 1 mAdc, IB = 0 V(BR)CEO - 150 -- Vdc Emitter-base breakdown voltage IE = - 10 µAdc, IC = 0 V(BR)EBO - 5.0 -- Vdc -- - 50 µAdc -- - 50 nAdc MIN. MAX UNIT 50 -- 60 240 50 -- -- - 0.2 -- - 0.5 -- - 1.0 -- - 1.0 SYMBOL TYP. MAX UNIT fT 100 300 MHz VCB = - 120 Vdc, IE = 0 Collector cutoff current ICBO VCB = - 120 Vdc, IE = 0, TA= 100°C ON CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL IC = - 1 mAdc, VCE = - 5 Vdc DC current gain IC = - 10 mAdc, VCE = - 5 Vdc hFE (Note 2) IC = - 50 mAdc, VCE = - 5 Vdc IC = - 10 mAdc, IB = - 1 mAdc Collector-emitter saturation voltage IC = - 50 mAdc, IB = - 5 mAdc IC = - 10 mAdc, IB = - 1 mAdc Base-emitter saturation voltage IC = - 50 mAdc, IB = - 5 mAdc VCE(SAT) (Note 2) VBE(SAT) (Note 2) -- Vdc Vdc SMALL – SIGNAL CHARACTERISTICS PARAMETER TEST CONDITION Current-gain-bandwidth product IC = -10 mAdc, VCE = - 10 Vdc, f = 100 MHz Out capacitance VCB = - 10 Vdc, IE = 0, f = 1 MHZ Cob -- 6 pF Small-signal current gain IC = -1 mAdc, VCE = - 10 Vdc, f = 1 kHZ hFE 40 200 -- Noise figure IC = - 200 µAdc, VCE = - 5 Vdc, f = 1 kHZ , RS= 10 Ω NF -- 8 dB ELECTRICAL CHARACTERISTIC CURVES MMBT5401 hFE, CURRENT GAIN FIG.1 - DC current gain IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR-EMITTER VOLTAGE (V) FIG.2 - Collector saturation region IB, BASE CURRENT (mA) IC, COLLECTOR CURRENT (uA) FIG.3 - Collector cut-off region VR, REVERSE-BIASED VOLTAGE (V) ELECTRICAL CHARACTERISTIC CURVES MMBT5401 IC, COLLECTOR CURRENT (mA) FIG.5 - Temperature coefficients Rθv, TEMPERATURE COEFFICIENTS (mV/°C) V, VOLTAGE (V) FIG.4 - On voltages FIG.7 - Capacitance C, CAPACITANCE (pF) FIG.6 - Switching time test circuit IC, COLLECTOR CURRENT (mA) VR, REVERSE VOLTAGE (V) FIG.9 - Turn-off time t , TIME (ns) t , TIME (ns) FIG.8 - Turn-on time IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) MECHANICAL INFORMATION MMBT5401 Package Dimensions : SOT-23 Dim. A B C D G H J K L S V INCHES Min. Max. 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 PIN: 1. BASE 2. EMITTER 3. COLLECTOR Recommended Footprint : MILLIMETERS Min. Max. 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 LEGAL DISCLAIMER NOTICE Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.