DynaRapid EMI Brochure: Rapid HighPower Bro PSpreads
4/26/10
3:29 PM
E N E R G Y
Page 1
M A N A G E M E N T
I N V E R T E R S
MADE IN THE USA
Dynapower Corporation designs, manufactures and tests
products within a single state-of-the-art vertically integrated
facility. Inverter systems are precision engineered, manufactured
and tested by highly experienced staff in our 150,000 sq. ft
factory in South Burlington, Vermont.
From bi-directional inverters to ULTRACAST cast coil, Oil
Immersed and VPI transformers, cooling assemblies to custom
liquid and air-cooled power modules, Dynapower has complete
control over the entire design, manufacturing and test process.
This allows Dynapower to provide its customers equipment that
is the most rugged, advanced and dependable in the power
conversion world.
Dynapower is a customer-focused business dedicated to
providing the highest quality equipment and service available.
Combined with our 24-hour technical support, our team of
customer service, sales, and engineering professionals is
prepared to assist you in all aspects of the operation and
maintenance of your equipment.
DYNAPOWER CORPORATION
85 Meadowland Drive
South Burlington, VT 05403
www.dynapower.com
© 2010 Dynapower Corporations – RP 1 1009 4148 100
24-Hour Technical Support
Dynapower: 1-800-292-6792
International: 1-802-860-7200
DynaRapid EMI Brochure: Rapid HighPower Bro PSpreads
4/26/10
3:29 PM
E N E R G Y
Page 3
M A N A G E M E N T
I N V E R T E R S
E N E R G Y
M A N A G E M E N T
I N V E R T E R S
The Leading Inverter Technology
Dynapower Industrial Grade Bi-Directional Inverters
The CPS is a 600VAC class,
bi-directional, modular,
Digital Signal Processor
(DSP) controlled line of
grid - interconnected
inverters ranging from
375 kVA to 1.5 MVA
Dynapower Corporation manufactures a full line of ultrafast, bi-directional inverters
ranging from 375 kVA to 1.5 MVA in the Compact Power Systems (CPS) 600VAC class
product line and fully integrated 1.5 MVA to 6.0 MVA medium voltage (5kVAC,
15kVAC and 34.5kVAC class) PowerSkid systems. Individual inverter systems are
upgradable through paralleling of additional units (up to 100 MVA) when the needs
of a facility or a substation grow.
Our inverter systems utilize state of the art digital controllers for acute management
of real & reactive power, system monitoring and system protection. CPS and
PowerSkid systems are IEEE and UL1741 compliant, offer sub-cycle response with
zero voltage ride through and can be operated in grid tied or stand alone modes.
With over four decades of industrial and utility system experience, Dynapower
Corporation provides the highest quality power conversion equipment in the market.
Applications & System Wide Benefits of Energy Storage
and Power Electronics Integration:
• Renewable Generation Value Enhancement
• Substation Upgrade Deferral
• Energy Arbitrage
• Time-of-Use Energy Cost Reduction
• Demand Charge Reduction
• Transmission and Distribution (T&D) Upgrade Deferral
• Transmission Support and Avoidance of Congestion Charges
(Peak Demand Charges)
• Reduced Cost for T&D Losses
• T&D Life Extension
• Power Quality Improvement
• Reduced Need for Generation Capacity
• Frequency Regulation
The PowerSkid line of medium voltage, DSP controlled, modular, grid inter-connected inverters integrates Dynapower’s ULTRACAST
cast coil transformer, system cooling and system control into a common enclosure. Dynapower offers standard PowerSkid packages
with power ranges from 1.5 MVA to 6.0 MVA and standard AC voltage options of 5kVAC, 15kVAC, and 34.5kVAC.
2
DYNAPOWER CORPORATION
DYNAPOWER CORPORATION
3
DynaRapid EMI Brochure: Rapid HighPower Bro PSpreads
4/26/10
3:29 PM
E N E R G Y
Page 3
M A N A G E M E N T
I N V E R T E R S
E N E R G Y
M A N A G E M E N T
I N V E R T E R S
The Leading Inverter Technology
Dynapower Industrial Grade Bi-Directional Inverters
The CPS is a 600VAC class,
bi-directional, modular,
Digital Signal Processor
(DSP) controlled line of
grid - interconnected
inverters ranging from
375 kVA to 1.5 MVA
Dynapower Corporation manufactures a full line of ultrafast, bi-directional inverters
ranging from 375 kVA to 1.5 MVA in the Compact Power Systems (CPS) 600VAC class
product line and fully integrated 1.5 MVA to 6.0 MVA medium voltage (5kVAC,
15kVAC and 34.5kVAC class) PowerSkid systems. Individual inverter systems are
upgradable through paralleling of additional units (up to 100 MVA) when the needs
of a facility or a substation grow.
Our inverter systems utilize state of the art digital controllers for acute management
of real & reactive power, system monitoring and system protection. CPS and
PowerSkid systems are IEEE and UL1741 compliant, offer sub-cycle response with
zero voltage ride through and can be operated in grid tied or stand alone modes.
With over four decades of industrial and utility system experience, Dynapower
Corporation provides the highest quality power conversion equipment in the market.
Applications & System Wide Benefits of Energy Storage
and Power Electronics Integration:
• Renewable Generation Value Enhancement
• Substation Upgrade Deferral
• Energy Arbitrage
• Time-of-Use Energy Cost Reduction
• Demand Charge Reduction
• Transmission and Distribution (T&D) Upgrade Deferral
• Transmission Support and Avoidance of Congestion Charges
(Peak Demand Charges)
• Reduced Cost for T&D Losses
• T&D Life Extension
• Power Quality Improvement
• Reduced Need for Generation Capacity
• Frequency Regulation
The PowerSkid line of medium voltage, DSP controlled, modular, grid inter-connected inverters integrates Dynapower’s ULTRACAST
cast coil transformer, system cooling and system control into a common enclosure. Dynapower offers standard PowerSkid packages
with power ranges from 1.5 MVA to 6.0 MVA and standard AC voltage options of 5kVAC, 15kVAC, and 34.5kVAC.
2
DYNAPOWER CORPORATION
DYNAPOWER CORPORATION
3
DynaRapid EMI Brochure: Rapid HighPower Bro PSpreads
4/26/10
3:29 PM
E N E R G Y
Page 5
M A N A G E M E N T
I N V E R T E R S
E N E R G Y
M A N A G E M E N T
I N V E R T E R S
The Leading Inverter Technology
Compact Power Systems (CPS)
For 600VAC class applications, Dynapower Corporation offers its
Compact Power Systems (CPS) family of industrial grade, bidirectional, four-quadrant, DSP controlled inverter packages.
The inverter product includes integrated cooling, system controls
as well as a full complement of switchgear including AC circuit
breaker, AC contactor, DC load break contactors (allowing for
the connection of individual battery strings) and DC manual
isolation switch, all housed in a rugged, heavy duty industrial
enclosure. This state of the art inverter optimizes the transfer
of energy between a DC energy storage system and a 600VAC
class, 3 Phase line providing power conditioning for intermittent
loads or renewable generation.
Compact Power Systems (CPS)
AC Voltage:
600VAC Class
DC Voltage:
750VDC – 1250VDC
Power Range:
375 kVA – 1500 kVA Standard, four quadrant operation
Controls:
Digital Signal Processor (DSP) based control system
Compliance:
UL 1741, IEEE 519, IEEE 1547
Cooling:
• Liquid-cooled inverter modules and chokes
• Air-Cooled Enclosure
Features:
• Four Quadrant Operation
• Local or Remote Operation
• Zero Voltage Ride Through
• Anti-Islanding Protection
• Modular Redundancy
• Ultrafast system response
• Complete factory system testing
• Complete system certification
Response:
Sub-Cycle Full System
Standard Overload: 150% for 10 Seconds. Other overload options available.
The CPS is a 600VAC class, bi-directional, modular, Digital Signal Processor (DSP) controlled line of grid interconnected
inverters ranging from 375 kVA to 1.5 MVA
Dynamic Interface for local control & monitoring of the CPS and PowerSkid Bi-Directional Inverter Product Lines
375kVA Liquid Cooled Bi-Directional
Inverter Power Module
4
DSP based control module offers multiple
communication and control options
DYNAPOWER CORPORATION
DYNAPOWER CORPORATION
5
DynaRapid EMI Brochure: Rapid HighPower Bro PSpreads
4/26/10
3:29 PM
E N E R G Y
Page 5
M A N A G E M E N T
I N V E R T E R S
E N E R G Y
M A N A G E M E N T
I N V E R T E R S
The Leading Inverter Technology
Compact Power Systems (CPS)
For 600VAC class applications, Dynapower Corporation offers its
Compact Power Systems (CPS) family of industrial grade, bidirectional, four-quadrant, DSP controlled inverter packages.
The inverter product includes integrated cooling, system controls
as well as a full complement of switchgear including AC circuit
breaker, AC contactor, DC load break contactors (allowing for
the connection of individual battery strings) and DC manual
isolation switch, all housed in a rugged, heavy duty industrial
enclosure. This state of the art inverter optimizes the transfer
of energy between a DC energy storage system and a 600VAC
class, 3 Phase line providing power conditioning for intermittent
loads or renewable generation.
Compact Power Systems (CPS)
AC Voltage:
600VAC Class
DC Voltage:
750VDC – 1250VDC
Power Range:
375 kVA – 1500 kVA Standard, four quadrant operation
Controls:
Digital Signal Processor (DSP) based control system
Compliance:
UL 1741, IEEE 519, IEEE 1547
Cooling:
• Liquid-cooled inverter modules and chokes
• Air-Cooled Enclosure
Features:
• Four Quadrant Operation
• Local or Remote Operation
• Zero Voltage Ride Through
• Anti-Islanding Protection
• Modular Redundancy
• Ultrafast system response
• Complete factory system testing
• Complete system certification
Response:
Sub-Cycle Full System
Standard Overload: 150% for 10 Seconds. Other overload options available.
The CPS is a 600VAC class, bi-directional, modular, Digital Signal Processor (DSP) controlled line of grid interconnected
inverters ranging from 375 kVA to 1.5 MVA
Dynamic Interface for local control & monitoring of the CPS and PowerSkid Bi-Directional Inverter Product Lines
375kVA Liquid Cooled Bi-Directional
Inverter Power Module
4
DSP based control module offers multiple
communication and control options
DYNAPOWER CORPORATION
DYNAPOWER CORPORATION
5
DynaRapid EMI Brochure: Rapid HighPower Bro PSpreads
4/26/10
3:29 PM
E N E R G Y
Page 7
M A N A G E M E N T
I N V E R T E R S
E N E R G Y
M A N A G E M E N T
I N V E R T E R S
The Leading Inverter Technology
PowerSkid
PowerSkid
Output Voltage:
Input Voltage:
Power Range:
Controls:
Transformer:
Enclosure:
Compliance:
Cooling:
Features:
The PowerSkid design combines state of the art bi-directional inverter technology
with Dynapower’s ULTRACAST cast coil transformer for connection to a medium
voltage grid (5kVAC, 15kVAC and 34.5kVAC voltage classes). The PowerSkid also
includes integrated cooling,
system controls and a full
complement of switchgear with
5kVAC, 15kVAC, & 35kVAC Options
primary AC circuit breaker and
400VDC – 1250VDC
individual AC contactors on the
1.5MVA – 6.0MVA
low voltage secondary side of
Digital Signal Processor (DSP) based control system
the transformer, DC load break
ULTRACAST Cast Coil Transformer
contactors (allowing for the
IP55 Walk-In Enclosure
connection of individual battery
UL 1741, IEEE 519, IEEE 1541, IEEE C37 & IEEE C57
strings) and DC disconnect, all
Liquid-Cooled
housed within a rugged, heavy
• Four Quadrant Operation
duty industrial walk-in enclosure
• Local or Remote Operation
rated for outdoor use. This
• Zero Voltage Ride Through
integrated system approach
• Anti-Islanding Protection
results in a substantial reduction
• Modular Redundancy
in Engineering, Procurement,
• Ultrafast system response
Construction and Management
• Complete factory system testing
(EPCM) costs.
• Complete system certification
Response:
Sub-Cycle Full System
Standard Overload 150% for 10 Seconds. Other overload options available.
This state of the art inverter
optimizes the transfer of energy
between a DC energy storage
system and a medium voltage,
3 Phase line providing power conditioning for intermittent loads or renewable
generation. Dynapower Corporation’s PowerSkid coupled with an advanced
battery storage system plays a key role in increasing the overall reliability
and responsiveness of the grid.
Enclosure
4.5 MVA PowerSkid System with integrated ULTRACAST cast coil transformer, system cooling & controls
and AC & DC switchgear.
Dry Type Epoxy Encapsulated ULTRACAST Cast Coil Transformer
Dynapower Corporation is the world leader in the manufacture of cast coil transformers
for specialty applications. The ULTRACAST process casts copper windings in a mold
under vacuum, locking the windings in a very strong, high dielectric, epoxy resin,
protecting the transformer from electrical demands and severe environments.
This technology offers unparalleled mechanical strength by sealing the coils in an
impervious casting of dielectric epoxy resulting in the most reliable and longest
lasting transformer technology available.
ULTRACAST transformers are designed, manufactured and tested in accordance
with ANSI and IEEE standards.
ULTRACAST TRANSFORMERS FEATURE:
Custom electrical and mechanical designs available.
• 300 kVA to 10 MVA standard range with other options available
• 600VAC to 34.5kVAC class voltages
The PowerSkid system is housed in an all-weather IP 55 walk-in style heavy duty,
painted steel enclosure designed for outdoor use. It is well-insulated, thermostatically
controlled with provisions for heating and cooling to maintain a controlled temperature
environment in both summer and winter.
Cooling
• 10kV to 150kV basic impulse levels
• 80° C or 115° C temperature rise levels standard with other
options available
• All coils wound with copper conductors.
• DuPont Nomex® UL recognized 220° C insulation system
The base inverter system features liquid cooled power electronics and chokes with
a medium voltage, air-cooled cast coil transformer. A variety of liquid-to-liquid or
liquid-to-air cooled options exist to provide our customers with an independent,
sealed system requiring minimum infrastructure and maintenance for continuous
operation. Dynapower Corporation works closely with its customers to determine
the best cooling options for a given ambient temperature and altitude.
• Both primary and secondary windings cast in UL
recognized epoxy
• Mitre cut, cruciform, step lap core fabricated from grain
oriented silicon steel standard
• Numerous NEMA and specialty enclosure options available
• Nationally Recognized Testing Laboratory (NRTL) inspection
and approval available
6
DYNAPOWER CORPORATION
DYNAPOWER CORPORATION
7
DynaRapid EMI Brochure: Rapid HighPower Bro PSpreads
4/26/10
3:29 PM
E N E R G Y
Page 7
M A N A G E M E N T
I N V E R T E R S
E N E R G Y
M A N A G E M E N T
I N V E R T E R S
The Leading Inverter Technology
PowerSkid
PowerSkid
Output Voltage:
Input Voltage:
Power Range:
Controls:
Transformer:
Enclosure:
Compliance:
Cooling:
Features:
The PowerSkid design combines state of the art bi-directional inverter technology
with Dynapower’s ULTRACAST cast coil transformer for connection to a medium
voltage grid (5kVAC, 15kVAC and 34.5kVAC voltage classes). The PowerSkid also
includes integrated cooling,
system controls and a full
complement of switchgear with
5kVAC, 15kVAC, & 35kVAC Options
primary AC circuit breaker and
400VDC – 1250VDC
individual AC contactors on the
1.5MVA – 6.0MVA
low voltage secondary side of
Digital Signal Processor (DSP) based control system
the transformer, DC load break
ULTRACAST Cast Coil Transformer
contactors (allowing for the
IP55 Walk-In Enclosure
connection of individual battery
UL 1741, IEEE 519, IEEE 1541, IEEE C37 & IEEE C57
strings) and DC disconnect, all
Liquid-Cooled
housed within a rugged, heavy
• Four Quadrant Operation
duty industrial walk-in enclosure
• Local or Remote Operation
rated for outdoor use. This
• Zero Voltage Ride Through
integrated system approach
• Anti-Islanding Protection
results in a substantial reduction
• Modular Redundancy
in Engineering, Procurement,
• Ultrafast system response
Construction and Management
• Complete factory system testing
(EPCM) costs.
• Complete system certification
Response:
Sub-Cycle Full System
Standard Overload 150% for 10 Seconds. Other overload options available.
This state of the art inverter
optimizes the transfer of energy
between a DC energy storage
system and a medium voltage,
3 Phase line providing power conditioning for intermittent loads or renewable
generation. Dynapower Corporation’s PowerSkid coupled with an advanced
battery storage system plays a key role in increasing the overall reliability
and responsiveness of the grid.
Enclosure
4.5 MVA PowerSkid System with integrated ULTRACAST cast coil transformer, system cooling & controls
and AC & DC switchgear.
Dry Type Epoxy Encapsulated ULTRACAST Cast Coil Transformer
Dynapower Corporation is the world leader in the manufacture of cast coil transformers
for specialty applications. The ULTRACAST process casts copper windings in a mold
under vacuum, locking the windings in a very strong, high dielectric, epoxy resin,
protecting the transformer from electrical demands and severe environments.
This technology offers unparalleled mechanical strength by sealing the coils in an
impervious casting of dielectric epoxy resulting in the most reliable and longest
lasting transformer technology available.
ULTRACAST transformers are designed, manufactured and tested in accordance
with ANSI and IEEE standards.
ULTRACAST TRANSFORMERS FEATURE:
Custom electrical and mechanical designs available.
• 300 kVA to 10 MVA standard range with other options available
• 600VAC to 34.5kVAC class voltages
The PowerSkid system is housed in an all-weather IP 55 walk-in style heavy duty,
painted steel enclosure designed for outdoor use. It is well-insulated, thermostatically
controlled with provisions for heating and cooling to maintain a controlled temperature
environment in both summer and winter.
Cooling
• 10kV to 150kV basic impulse levels
• 80° C or 115° C temperature rise levels standard with other
options available
• All coils wound with copper conductors.
• DuPont Nomex® UL recognized 220° C insulation system
The base inverter system features liquid cooled power electronics and chokes with
a medium voltage, air-cooled cast coil transformer. A variety of liquid-to-liquid or
liquid-to-air cooled options exist to provide our customers with an independent,
sealed system requiring minimum infrastructure and maintenance for continuous
operation. Dynapower Corporation works closely with its customers to determine
the best cooling options for a given ambient temperature and altitude.
• Both primary and secondary windings cast in UL
recognized epoxy
• Mitre cut, cruciform, step lap core fabricated from grain
oriented silicon steel standard
• Numerous NEMA and specialty enclosure options available
• Nationally Recognized Testing Laboratory (NRTL) inspection
and approval available
6
DYNAPOWER CORPORATION
DYNAPOWER CORPORATION
7
DynaRapid EMI Brochure: Rapid HighPower Bro PSpreads
4/26/10
3:29 PM
E N E R G Y
Page 1
M A N A G E M E N T
I N V E R T E R S
MADE IN THE USA
Dynapower Corporation designs, manufactures and tests
products within a single state-of-the-art vertically integrated
facility. Inverter systems are precision engineered, manufactured
and tested by highly experienced staff in our 150,000 sq. ft
factory in South Burlington, Vermont.
From bi-directional inverters to ULTRACAST cast coil, Oil
Immersed and VPI transformers, cooling assemblies to custom
liquid and air-cooled power modules, Dynapower has complete
control over the entire design, manufacturing and test process.
This allows Dynapower to provide its customers equipment that
is the most rugged, advanced and dependable in the power
conversion world.
Dynapower is a customer-focused business dedicated to
providing the highest quality equipment and service available.
Combined with our 24-hour technical support, our team of
customer service, sales, and engineering professionals is
prepared to assist you in all aspects of the operation and
maintenance of your equipment.
DYNAPOWER CORPORATION
85 Meadowland Drive
South Burlington, VT 05403
www.dynapower.com
© 2010 Dynapower Corporations – RP 1 1009 4148 100
24-Hour Technical Support
Dynapower: 1-800-292-6792
International: 1-802-860-7200