Fixings - Whole of House

advertisement
Fixings
Fixings Offer
TIMBER SCREWS
DECKING SCREWS
METAL SCREWS
ROOFING SCREWS
COLLATED SCREWS
RIVETS
BOLTS
NAILS
MASONRY
CHEMICALS
PA TOOLS
PLASTER
CONNECTORS
JOIST HANGERS
POST SUPPORTS
COLLATED NAILS
Screws
Screw Selection Guide
Head Styles
Hexagon Head with Washer Face
To accommodate a watertight sealing
washer.
Wafer Head
A versatile low head style used for many
fastening applications. #2 Phillips Cross
Head Bit.
Bugle Head
Smooth curved surface under head is designed
to avoid damage to plasterboard. #2 Phillips
Cross Head Bit.
Bugle Head Batten
For a flush finish into timber. For fastening
battens to timber rafters. 5mm internal
hexagon drive bit.
Pan Head
Designed for applications fixing against
metal surfaces. #2 Phillips Cross Head Bit.
Button Head
Low profile head enables fastener to sit
level on surface. #2 Phillips Cross Bit of #2
Square Drive Bit.
Countersunk Head
For countersinking into timber for a flush or
recessed finish. #2 Phillips Cross Head Bit or #2
Square Drive Bit.
Self Embedding Head
Designed to ream into sheeting or hardwoods.
#2 Phillips Cross Head Bit.
Screw Selection Guide
Coatings
Zinc Plated (ZP): Internal Use
An electroplated zinc coating.
Gold Passivated (GP): Internal Use
Chromate film over zinc for a higher corrosion
protection.
Galvanised (Gal): Class 3
Mechanically applied zinc, suitable for external
use.
Tin/Zinc (TZ): Class 3
Combines tin & zinc, suitable for external use
Zinc Alloy (ZA): Class 3
Similar coating to Tin/Zinc, suitable for external
use.
Tufcote (TC): Class 3
Suitable for treated pine use. Consists of a
sacrificial zinc base coat with organic top coat
for protection against timber treatments.
Climacoat (CC): Class 3
Suitable for treated pine use. Consists of a sacrificial zinc
base coat with organic top coat for protection against
timber treatments.
Climaseal 3 (CS3): Class 3
A coating that meets AS3566.2-2002 Class 3 under real
world testing.
Climaseal 4 (CS4): Class 4
A coating that meets AS3566.2-2002 Class 4 under real
world testing.
Corrosion Classes
Class 1: For internal use
Class 2: For internal use where significant levels of
condensation occurs.
Class 3: For external use in mild industrial and moderate
marine applications.
Class 4: For external use in moderate and severe marine
environments (generally from 100m to 300m from the
beach front).
Screws
TIMBER
CHIPBOARD
PLASTERBOARD
DECKING
TREATED PINE
METAL
POLYCARBONATE
ROOFING
CYCLONE
ASSEMBLIES
COLLATED SCREWS
Fixing to Timber
Timber Screws
Self drilling screws for fixing into timber and thin steel thicknesses up
to 0.75mm battens.
Bugle Head Batten
Fixing roofing battens or fastening heavy timbers where a flush finish
is required – fencing – pergolas - boardwalk. Type 17 point. ZP, TZ,
ZA3, Climacoat3.
Countersunk Head
Jobs needing a flush finish – hinges – furniture – brackets. Type 17
point. ZP, TZ.
Self Embedding Head
General fixing – walls – wet area linings - particleboard flooring.
Type 17 point. ZP, TZ.
Button Head Stitching Screws
Where a broad, flat head is needed, e.g. shade cloth, foil insulation,
wire mesh, etc. Needle point. ZP, TZ.
Wafer Head Screws
Jobs needing a low profile head – metal deck clips – electrical fittings
– signs. Type 17 point. ZP, TZ.
Fixing to Timber
Timber Screws
Self drilling screws for fixing into timber and thin steel battens
to 0.75mm thick.
Hex Head - No Seal (Part Thread)
For fixing timber or thin steel – vertical cladding - furniture –
pergolas – gates & fences. Type 17 point. TZ, Climaseal® 3.
Hex Head – No Seal (Full Thread)
For fixing timber or thin steel – vertical cladding – furniture –
pergolas – gates & fences. Type 17 point. TZ, Climaseal® 3.
Hex Head - With Seal (Part Thread)
For crest fixing roofing profiles to timber battens. Type 17 point.
TZ, Climaseal® .
Hex Head - With Seal (Full Thread)
For valley fixing wall cladding. Type 17 point. TZ, Climaseal® 3 .
Fixing to Timber
Chipboard Screws
Chipboard Screws have a course thread and fine
shank to provide maximum grip and minimum
strip-out into chipboard, MDF board and soft
timbers.
Countersunk Rib Head
For general fixing – cabinets – furniture – kitchens –
office partitioning. Available in Phillips Drive and
Square Drive. GP & GAL finishes.
Fixing to Timber & Metal
Plasterboard Screws
Plasterboard Screws feature a bugle shaped head which
countersinks neatly into plasterboard without crushing the
core, or tearing the face paper.
Bugle Head – Needle Point
For fixing plasterboard to timber – wall and ceilings – partitions.
GP finish.
Bugle Head – Teks / Drill Point
For fixing plasterboard to metal. GP finish.
Decking Screws
For fixing to treated pine and hardwood decking for a flush finish.
When fixing hardwood timbers, pre-drilling is recommended.
Countersunk Rib Head – Square Drive
Suitable for decking using most treated pine and hardwood timbers.
Pre-drilling required. Available in;
- Climacoat 3 , Stainless Steel Grade 303 & 316
QuickShotTM Self Drilling – Square Drive
Suitable for use in treated pine and hardwood decking.
- Stainless Steel grade 304 and Tufcote
Bugle Head Batten – Internal Hex Drive
Suitable for decking, boardwalks, landscaping and outdoor furniture.
- TZ, ZA3, Climacoat 3, Stainless Steel Grade 302 & 316
Fixing to Timber
Fixing To Treated Pine
Treated Pine Screws
For general fixing to treated timber – trellis, outdoor furniture,
fencing, lattice, etc. Finished in Tufcote® (Zenith) and
Climacoat® (Buildex) to resist the corrosive effects of timber
treatments.
Countersunk Rib Head – Phillips Drive
- Tufcote® (Zenith)
- Climacoat® (Buildex)
Countersunk Rib Head – Square Drive
- Tufcote® (Zenith)
Fixing to Metal
Metal Screws - Teks®
Self drilling screws with a hardened drill point that will drill and
thread into structural steel and mild steel.
Bugle Head Teks®
Fixing plasterboard to metal. TZ finish.
Countersunk Head Teks®
Jobs needing a flush finish – fencing – gates - hinges. ZP, TZ.
Countersunk Head – Wing Teks®
Fixing timber and composite boards to metal – prevents timber rising
to the top of the screw while the metal is being drilled. ZP, TZ,
Climacoat3 .
Button Head Teks®
Where a broad flat head is needed– foil sarking – insulation panels –
facsia bracket clips, etc. ZP, TZ finishes.
Wafer Head Teks®
Jobs needing a low profile head – metal deck clips – electrical fittings
– signs – sheet metal. Zinc plated, Tin/Zinc finish
Fixing to Metal
Metal Screws - Teks®
Self drilling screws with a hardened drill point that will drill and
thread into structural steel and mild steel.
Hex Head Teks® - No Seal (Part Thread)
For fixing metal to metal – fences – signs – fixings - trailers. TZ,
Climaseal® 3 finishes.
Hex Head Teks® – No Seal (Full Thread)
For fixing metal to metal – fences – signs – fixings - trailers. TZ,
Climaseal® 3 finishes.
BattenZips® - Metal
For fixing roofing profiles and cladding to lightweight 0.75mm metal
battens. Climaseal® 3 finish.
PolyZips® – Timber or Metal
For fixing polcarbonate sheeting to timber or metal purlins. Hex
Head with Dome Washer & Cutter. Climaseal® 3 finish
Fixing to Timber & Metal
Roofing Screws
Roof Zips® – Timber or Metal
Easier to use, faster to install, RoofZips® are used for fixing steel roof
sheeting to timber, to thin metal battens or steel purlins up to 1.9mm
thick. Climaseal® 4 coating which meets AS3566 Class 4.
Hex Head Teks® - With Seal (Part Thread)
Fixing roofing profiles and wall cladding to steel purlins. TZ,
Climaseal® 3 and Climaseal® 4 finishes.
Hex Head Teks® - With Seal (Full Thread)
Fixing roofing profiles and wall cladding to steel purlins. TZ,
Climaseal® 3 and Climaseal® 4 finishes.
Hex Head Teks® – HiGrip With Seal
For crest fixing corrugated and square rib roofing profiles to steel
purlins. TZ, Climaseal® 3 and Climaseal® 4 finishes.
Fixing to Timber & Metal
Roofing Screws
- Cyclone Assemblies
CORRI-LOK® - Available in Type 17 & Metal Teks®
Fixing corrugated roofing profile to timber battens and steel purlins in
cyclonic areas. Climaseal® 4 coating
SQUARE-LOK® - Type 17 & Metal Teks®
Fixing square rib roofing profiles to timber battens and steel purlins in
cyclonic areas. Climaseal® 4 coating
High Rib Profiles – Type17 & Metal Teks®
Fixing high rib roofing profiles to timber battens and steel purlins in
cyclonic areas. Climaseal® 4 coating
Ridge Cap Assemblies – Type 17 & Metal Teks®
For ridge cap assembly of roofing profiles to timber battens and steel
purlins in cyclonic areas. Climaseal® 4 coating
Collated Screws
Self Drilling Plasterboard Screws
Designed for fixing plasterboard to timber or light gauge
steel.
Self Drilling Metal Screws
Drill, tap and fasten into steel up to 6mm thick in one single
operation, eliminating alignment problems and increasing
fastening speed.
Self Drilling Particleboard Screws
Designed for attaching particleboard and soft timbers to
particleboard or soft timbers. Ideal for furniture, cabinet
making and office partitioning applications.
Self Drilling Cabinet Screws
Designed for attaching particleboard, timber, insulation foil
or sheet metal to timber.
Construction Fasteners
Fixing to Metal
Blind Rivets
For low cost, reliable fastening of light gauge materials where
access to the rear or “blind side” of joint is not accessible.
BLIND
RIVETS
Open Rivets
Provide an economical means for permanent fastening
light gauge metal parts.
Open
RIVET
MATERIAL
MANDREL
MATERIAL
COLOUR
CODE
Aluminium
Zinc Plated
Steel
Red
Zinc Plated
Steel
Zinc Plated
Steel
Green
Stainless Steel
304
Stainless Steel
304
Blue
Multi-Grip Rivets
Sealed
Aluminium
Zinc Plated
Steel
Purple
One size handles the grip range capacity of up to 3 standard
open end rivets using a standard riveting tool. They can
clamp a wide range of material thickness, reduce inventory
requirements, provide superior clamping and high strength,
have high vibration resistance and completely fill the hole
during riveting.
MultiGrip
Aluminium
Zinc Plated
Steel
Yellow
RIVET
MATERIA
L
COMPATABLE METALS FOR FASTENING
Aluminium
Aluminiu
m
Sealed Rivets
Are ideal where an application has to be water or
pressure tight. Sealed rivets have 100% mandrel
retention, so give a higher tensile and shear loading
performance than open type rivets.
Zinc
Plated
Steel
Stainless
Steel 304
Stainless
Steel
Aluminium/Zinc
Plated Steel
Zinc Plated
Steel
(mild environments only)
Aluminium/Zinc
Plated Steel
Zinc Plated
Steel
Copper
Brass
Fixing to Timber & Steel
Bolts & Coach Screws
Cup Head
Ideal for fastening timber to timber. “Square neck” feature
limits bolt from spinning when tightening nut.
Hex Head
Ideal for fastening metal to metal. Useful in most general bolt
applications.
Coach Screws
Ideal for fastening timber to timber. “Gimlet Point” allows for easy
application into timber.
Zinc Plated
Hot Dipped Galvanised
Tech-Shieldᵀᵀ
Stainless Steel
For internal applications
such as furniture
construction and garage
work benches.
Provides additional
protection against outside
elements, limiting
corrosion.
Protects the bolt from
the chemicals found in
CCA and ACQ treated
pine, hence prolongs the
life of the bolt.
Stainless Steel is a
premium bolt material
that is suitable for
highly corrosive areas
(EG. coastal).
* All Zenith Bolts are made to Australian or DIN standards.
Nails
GENERAL
PURPOSE
DECKING
SHEETING
TIMBER
CONNECTOR
SPECIALTY
General Purpose Nails
Bullet Head Nails
General purpose nails for fixing timber to timber.
Available in Bright Steel, Galvanised finish and
Stainless Steel.
Flat Head Nails
Large head to avoid pull though in soft timbers.
Available in Bright Steel, Galvanised finish and
Stainless Steel.
Clouts
For fixing thin sheet metal to timber. Wide flat head
prevents pull through. Available in Galvanised finish.
Fixing to Timber
Fixing to Timber
Decking Nails
Decking (GripLock) Nails
Used for fixing timber to timber for
heavy duty landscaping & decking
applications. Available in Galvanised
finish and Stainless Steel.
Decking Spikes
For fixing large section timbers,
treated pine of hardwood sleepers.
Available in Galvanised finish.
Fixing to Timber
Sheeting Nails
Fibre Cement Nails
For fixing cement sheet lining board to timber framework.
Available in Galvanised finish and Stainless Steel.
Particle Board Nails
For fixing particle board sheet, specifically for internal linings and
flooring. Available in Bright Steel and Gold Passivated finish.
Soft Sheet Nails
For fixing plywood sheet. Available in Zinc Plated.
Hardboard Nails
For fixing hardboard linings – dense and compressed . Available in
Zinc Plated.
Fixing to Timber
Sheeting Nails
Underlay / Fibre Cement Nails
For fixing fibre cement underlay sheet to timber flooring. Available in
Bright Steel.
Underlay / Hardboard Nails
For fixing hardboard underlay sheet to timber flooring. Available in
Bright Steel.
Wall Board Nails
For fixing wallboard to timber frame. Available in Zinc Plated.
Plasterboard Nails
For fixing plasterboard to timber framework. Available in Zinc Plated.
Fixing to Timber
Timber Nail Connectors
Bracket Plain Shank
For fixing brackets and timber connectors. Available in
Galvanised finish.
(3.75mm diameter)
Bracket Helical Shank
With helical thread for greater holding power. Available in
Galvanised finish.
Strapping
Designed for fixing thin metal strapping. Available in
Galvanised finish and Stainless Steel 316 grade.
(2.8mm diameter)
Fixing to Timber
Specialty Nails
Blue Cut Tacks
Large headed nails used to hold floor coverings or upholstery
work.
Upholstery
For fixing fabric/furniture coverings to timber.
Staples – Plain / Barbed
U-shaped, double ended nail, used fixing mesh or shade cloth to
timber.
Corrugated Fasteners
Designed for joining across timber face
Fixing to Timber
Specialty Nails
Roofing Nails – Plain Shank
Plain shank connector used for fixing external roofing or cladding.
Available in Galvanised finish.
Roofing Nails –Twisted Shank
Twisted shank for extra holding power. Available in Galvanised
finish.
Concrete Nails
Used for fixing timber to freshly laid concrete. Available in Zinc
Plated.
Skirting
For fixing skirting board to brick or masonry walls. Available in
Zinc Plated.
Masonry & Plasterboard Anchors
DynaBoltᵀᵀ
AnkaScrewᵀᵀ
EXPANSION
CHEMICALS
NYLON
RAMPLUGS
WALL PLUGS
MASONRY NAILS
WallMateᵀᵀ
HOLLOW WALL
TOGGLES
PA TOOLS &
ACCESSORIES
Fixing to Masonry
DynaBoltᵀᵀPlus
DynaBoltᵀᵀPlus is a patented design sleeve anchor with the unique ability to “pull down”
and ensure a tight and secure anchoring to the fixture. For medium duty anchoring of
timber and steel fixtures to concrete.
- Hex Head
- Flush Head
- Flat Head
- Round Head
- Eye Bolt
- Hook Bolt
Available in diameters of 6 through to 20mm;
in yellow passivated zinc, hot dip galvanised finish and stainless steel AISI 316.
Fixing to Masonry
AnkaScrewᵀᵀ
The AnkaScrewᵀᵀScrew-In Anchor is a medium duty,
rotation setting thread forming anchor. It’s fast and easy
to install, easy to remove and does not expand or burst
substrate allowing close to edge installation. Suitable for
solid concrete, masonry and hollow brick and block.
Hex Head, WERCS™ Thread
Available in 6 through to 12mm in diameter, up to 150mm
in length; in zinc passivated and galvanised finishes.
Fixing to Masonry
Expansion Anchors
TruBoltᵀᵀ Stud Anchors
TruBoltᵀᵀ is a heavy duty torque setting expansion anchor for
permanent anchoring into solid substrates such as concrete.
Loxinᵀᵀ Shield Anchors
The Loxinᵀᵀ is a shorter length, internally threaded anchor for use
with machine bolts and threaded rod into solid substrates such as
concrete, brick, block and stone.
ShureDriveᵀᵀ
SureDriveᵀᵀ is a nail in expansion anchor providing a tamper
proof anchor into solid concrete or masonry.
Fixing to Masonry
Chemical Anchors
ChemSetᵀᵀ101 Plus 400ml / 750mml
A fast curing multi purpose chemical mortar for anchoring
into solid concrete and masonry or hollow brick and
concrete block.
Styrene free and low odor. Versatile, multi-purpose two
part polyester anchoring system.
Fast cure for high productivity. Non-drip formula, ideal for
overhead installation.
Fixing to Masonry
Chemical Anchors
ChemSetᵀᵀ801 400ml / 750ml
A high performance chemical resistant vinyl ester
adhesive. Heavy duty anchoring of threaded studs
and reinforcing bar into solid concrete and stone.
Fast cure, chemical resistant and suitable for
contact with drinking water.
Tough and reliable for extra security.
Fixing to Masonry
CHEMICAL ANCHORS
ChemSetᵀᵀ Maximaᵀᵀ Capsules
Rapid cure, extra heavy duty anchoring
of threaded studs into solid concrete and
stone. For small jobs with few fixings.
One capsule for one hole - no mixing,
no mess, no waste.
UltraFixᵀᵀPlus
Ultrafix ᵀᵀ Plus is a fast curing adhesive for
anchoring threaded rod and studs.
Available in convenient 300ml cartridge with
2 nozzles. Fits a standard calking gun.
Fixing to Masonry
Chemical Anchoring Accessories
Mixer Nozzles
Two types available, suitable for vinyl ester and polyester
Chemsetᵀᵀ Universal Applicator Gun
Hole Cleaning Brushes
Available in 3 sizes
(8-12mm, 16-20mm, 20-24mm)
Hole Cleaning Pump
ChemSetᵀᵀ Anchor Studs
Available in M8 through to M24 and length up to
300mm; in zinc plated, hot dip galvanised and stainless steel 316.
Fixing to Masonry
Nylon Anchors
Nylon Anchors
Light duty removable expansion anchors for use in solid
concrete and masonry.
Countersunk Head
Mushroom Head
Round Head
EasyDriveᵀᵀ Anchors
Light duty removable expansion anchors for use in solid
concrete and masonry.
Available in zinc plated steel and stainless steel.
Fixing to Masonry
RamPlugᵀᵀ Anchors
RamPlugᵀᵀ Anchors– Standard
Ramplug provides a medium duty screw anchoring point
into concrete, hollow brick and for light duty applications into
lightweight concrete.
RamPlugᵀᵀ Anchors– Long Plug
RamPlugᵀᵀ Anchors– Ultra Long Plug with Screw
Available with flat and hex head screws, in yellow passivated
zinc and galvanised finishes.
Fixing to Masonry
Wall Plugs
Wall Plugs
An inexpensive expansion plug for use with screws.
Wall Plug is also available in rolls of 5m length.
White (5mm), Red (6mm), Green (7mm), Blue (8mm)
Plastic Spaghetti
Used with 4.5-6g screws and nails.
Fixing to Masonry
Concrete Nails
Concrete Nails without Washer
Concrete Nails with Washer
Concrete Nails with Striated Shank
For hand hammer driving into concrete and solid brick. Ramset™ concrete nails are manufactured from
ductile, high strength carbon steel and are available in a number of different styles to suit a range of
applications.
Powder Actuated Tools &
Accessories
FrameMaster™ TS750P
A power adjustable tool designed for fixing timber
framing to concrete and general repetitive work.
FrameMaster™ Accessories
• Drive Pins
For fastening to standard strength concrete,
masonry and steel up to a maximum of 8mm.
• Power Load Strip (Yellow)
Fixing to Masonry
JobMaster™
An all round, powerful general purpose
tool for the less frequent user – essential for every
contractor’s toolbox.
JobMaster™ Accessories
• Drive Pins
For fastening to standard strength concrete,
masonry and steel up to a maximum of 8mm.
•Power Load Cartridges
Available in green, yellow and red.
Fixing to Masonry
FormMaster™
High powered fastening system with the power
and comfort to meet the demands of the timber
and steel formwork industry and heavier repetitive
fixing jobs.
FormMaster™ Accessories
• Drive Pins
For fastening to standard strength concrete,
masonry and steel up to a maximum of 8mm.
• Power Load Strip (Red & Yellow)
Fixing to Masonry
Fixing to Masonry
Frameboss™
Is a fully automatic powder actuated tool, which is
capable of fixing 10 pins without the need to reload or
cycle the tool.
With a huge 380 Joules of impact energy coupled
with power adjustment, the tool can be used in a wide
variety of applications
FrameBoss™ Accessories
• Collated Drive Pins
For fastening to standard strength concrete, masonry
and steel up to a maximum of 8mm.
• Power Load Strip (Red & Yellow)
Fixing to Plasterboard
WallMateᵀᵀ
Nylon
Medium duty applications, up to 7kg - bathroom, & garage
fixtures, mirrors & clocks,
Metal
Medium duty applications, up to 7kg - curtain rods, coat
racks, paintings, etc.
Nylon Mini
Light duty applications up to 5kg – pictures, clocks, doorbells
Metal Mini
Light duty applications up to 5kg – wall phones, smoke
detectors,
ToggleMateᵀᵀ
Heavy duty applications up to 11kg – shelving, mirrors, coat
racks.
NB. Loads are based on application into 10mm plasterboard.
Fixing to Plasterboard
Hollow wall Anchors
Hollow Wall Anchors
Suitable for light to medium duty applications such as
bathroom, kitchen and ceiling fixtures, shelving brackets, etc.
Available for wall thicknesses from 5mm to 38mm thick.
Hollow Wall Anchor Setting Tool
Fixing to Plasterboard
Toggles
RamToggleᵀᵀ
Light duty nylon cavity fastener. The nylon body is
non-conductive to electricity.
Spring and Gravity Toggles
Ideal for light to medium duty hook and bracket
installation, electrical fittings and bathroom
accessories into wall and ceiling applications.
Timber Connectors
TIMBER CONNECTORS
BRACING
TIE-DOWN
CONNECTORS
STRAPS
HANGERS
NAILS & FIXES
CONNECTOR
PLATES
BRACKETS
BUILDERS
HARDWARE
Timber Connectors
Bracing
Strap Brace
Strap Brace Tensioners
For wall and roof bracings. Use with Pryda
Tensioners.
Available in options for hand fastening and
fastening with power tools. Use with Pryda
Strapbrace.
Speedbrace
For wall and roof bracing.
Mini & Maxi Brace
For diagonal wind bracing and nogging of wall
frames.
All Pryda bracings are manufactured from G300 Z275 ZincForm® steel or equivalent for high strength and corrosion resistance in
normal, interior uses.
Timber Connectors
Tie Down Connectors
Minigrips
Economical connector for the numerous lightly loaded joints in
houses and other buildings. Available in Galvanised and G316
Stainless Steel.
Multigrips
Ideal connectors for many uses in timber framing, eg., tie-down
connectors; carport, pergola and deck construction; right angle
joints. Available in Galvanised and G316 Stainless Steel.
Triplegrips
Can be used for a variety of nail fixed timber joints, eg., roof truss
to wall plate; rafter or ceiling joist to wall plate; purlin to truss;
hanger to ceiling joist; or wall stud to bottom plate.
To install Pryda Minigrips, Multigrips or Triplegrips; use only 35 x 3.15mm galvanised Pryda Timber Connector Nails.
Timber Connectors
Tie Down Connectors
Batten Straps
Used for tying down roof battens to trusses and
rafters.
Joist Straps
Used for tying down timber roof battens or purlins to
trusses or rafters.
Cyclone Straps
Used for tying down purlins to trusses or roof trusses
to wall frames in high wind areas.
To install Pryda Straps & Ties; use only 35 x 3.15mm galvanised Pryda Timber Connector Nails.
Timber Connectors
Tie Down Connectors
Stud Ties
A quick, neat and effective connector between studs and
wall plates.
Truss Ties
Designed to tie down roof trusses or rafters to a timber
top plate.
Wall Ties
Rigid wall ties suitable for connecting masonry to timber.
Available in G300-Z600 galvanised steel and 316 Grade
Stainless Steel.
To install Pryda Stud & Truss Ties; use only 35 x 3.15mm galvanised Pryda Timber Connector Nail.
Timber Connectors
Joist Hangers
Framing Brackets
For connecting a timber beam/joist to another beam at right
angles, such as beam to beam connections and roof trusses
to supports. Manufactured using G300 galvanised steel and
G316 Stainless Steel.
I-Joist Hangers
For fixing/supporting I-joists to the face of timber beams.
Manufactured using G300 galvanised steel.
To install Pryda Joist and I-Joist Hangers; use 35 x 3.15mm galvanised Pryda Timber Connector Nails.
Timber Connectors
Nails & Fixes
Pryda Fix / Foil Fix
For fixing foil insulation and shade cloth to
timber frames. Holds material securely and
prevents tearing.
Shade Fix
For fixing woven and knitted shade cloth to
timber framing. Features rounded edge to
eliminate tearing cloth on sharp edges.
Timber Connector Nails
Recommended for fixing Pryda Timber Connectors. Size: 35mm x
3.15mm. Galvanised Finish and Stainless Steel G316. Laboratory
testings has shown that clouts are not adequate for this purpose as their
heads may pop off under less than design load.
Connector Plates
Timber Connectors
Connector Plates
Quick and easy connector for timber end to end joints.
Corner Plates
For right angle joints of timbers in light framing. e.g. gate
frames, tops of pergola beams, etc.
Nail-On Plates
Nail fix to timber to join beams or any heavy duty timber
connection
To install Pryda Connector Plates use only 35 x 3.15mm galvanised Pryda Timber Connector Nails.
Timber Connectors
Connector Plates
Knuckle Nail Plates
Mininail
Multi-purpose connector for structural and
non-structural timber joining and timber
protection use.
For simple butt joints of timber of small
sizes.
Strap Nails
For joining of timber frames, etc.
Pryda Knuckle Nail Plates, Mininails and Strap Nails are manufactured from G300 Z275 ZincForm® steel or equivalent
Timber Connectors
Brackets
Fascia Supports
Pergola Angles
Used to connect the overhangs
of rafters or trusses to fascias
or fascia ledgers. Galvanised
steel.
A heavy duty multi-purpose
building bracket, mostly used for
connecting pergola rafters to
support beams. Available in G300
galvanised steel and G316
Stainless Steel.
Heavy Duty Angles
Log Support Bracket
Suitable for stair or shelf
brackets, internal or external
corner support. Galvanised
steel.
Joins logs and posts quickly and
simply without the necessity of
checking out. Galvanised steel.
To install Pergola Angles & Log Support Brackets use 35 x 3.15mm galvanised Pryda Timber Connector Nails.
Timber Connectors
Builders hardware
Ant Caps
Termite Shields
Galvanised steel Ant Caps are used to protect
buildings against subterranean termites.
Galvanised steel Termite Shields are used to
protect buildings against subterranean
termites. Complies with AS3660.1-1995.
Edge Pins
Convenient pins for holding formwork etc. at
ground level.
Post Anchors
Post Anchors
Full Stirrup
Can be bolted to existing concrete or decking or set into
concrete.
Half Stirrup
Ideally suited to uses where the post is located against a
wall or step and can only be bolted from one side. Can be
bolted to existing concrete or decking or set into concrete.
Solid Stem
A Full Stirrup post anchor with a solid, angle stem, suitable
for setting into wet concrete. (Available on request)
Post Anchors
Post Anchors
Centre Fix
Generally used to “hide” the post anchor. The post is slotted at
the bottom and bolted through the post and anchor, leaving only
the bolt heads, nuts and washers visible. Can be bolted to existing
concrete or decking or set into concrete.
Centre Pin
For use where the post is not to be visible. Due to the
fixing method, it is only suitable for small spans or where
no roofing is used.
Fish Tail
A Centre Fix design post anchor that is designed with an angled stem for setting
directly into wet concrete. (Available on request)
Post Anchors
Post Anchors
Bolt Down
These anchors are used for locating 90mm, 100mm,
115mm and 125mm posts onto existing concrete or
decking.
High Wind
Engineered for high wind application areas, including
tropical regions. The U shape base is designed for
maximum hold-down in concrete. Used for deck
construction, gazebo construction, pergola
construction & post supports.
Impulse Tool Fasteners
Fastener Specifications – Nails
NAIL HEAD TYPES
D – HEAD
Offers similar performance to round
head nails but enables fasteners to be
collated hard up against each other.
RounDrive
New style of head design allows for tight
collation and ensures much greater
holding power.
DekFast
Offers an aesthetic appearance when
counter sunk into treated pine, gives the
look of a round head nail.
NAIL POINT TYPE
Diamond
The most common and easiest to drive.
NAIL SHANK TYPE
Smooth
Smooth shank nails provide excellent
holding power in most timber
applications
Ring
Ring shank nails provide superior
withdrawal resistance in softwood
receiving timbers.
Screw/Twist
Excellent for hardwood receiving
timbers.
NAIL COLLATION TYPE
ProStrip Paper Tape
No collation material is left on the job
site.
Fasteners Specifications – Brads
BRAD HEAD SHAPE
BRAD COLLATION TYPE
Lost Head
Glue Coating
Where a hidden fix is required
BRAD SHANK TYPES
Smooth – gauges available:
18 Gauge = 1.2mm
16 Gauge = 1.6mm
14 Gauge = 2.0mm
Wire diameter indication
BRAD POINT TYPE
Blunt Chisel
Requires the greatest driving power.
Almost eliminates timber splitting.
No collation material is left on the job
site
Fastener Specifications – Staples
CROWN TYPES
STAPLE POINT TYPES
Standard Crown
Blunt Chisel
The industry standard for most
applications
Raised Crown
The raised crown is mainly used in wire
fastening to timber post e.g trellising in a
winery or rural fencing. Crown width
12.7mm
STAPLE SHANK TYPE
Smooth – available in:
Medium wire: 18 gauge; 1.2mm
Heavy wire: 16 gauge;1.6mm
Not suitable for clinching applications
Divergent Point
Legs travel in opposite directions to
increase holding power
STAPLE COLLATION TYPE
Glue Coating
Glue coating – No collation material
is left on the job site
Coatings & Corrosion
Classes
Corrosion Classes
Class 1: For internal use
Class 2: For internal use where significant levels of
condensation occurs.
Class 3: For external use in mild industrial and moderate
marine applications.
Class 4: For external use in moderate and severe marine
environments (generally from 100m to 300m from the
beach front).
Air Tool Fasteners
Fastener Specifications – Nails
Air tool
NAIL HEAD TYPES
NAIL SHANK TYPES
Round
Smooth
Conventional nail head shape. Best
suited to applications requiring higher
pull-through resistance
Smooth shank nails provide excellent
holding power in most timber
applications.
Available in a wide range of lengths
and shank diameter.
D – HEAD
Offers similar performance to round
head nails but enables fasteners to be
collated hard up against each other.
T & Finish Head
Moderate pull – through resistance.
Limited damage to timber surface.
Dome
Offer an aesthetically pleasing result.
Ideal for decking
Ring
Ring shank nails provide superior
withdrawal resistance in softwood
receiving timbers.
Screw / Twist
Excellent for hardwood receiving
timbers.
Fastener Specifications – Nails
Air Tool
NAIL POINT TYPES
NAIL COLLATION TYPES
Diamond
Coil Nails: Plastic collated – 15 degree and 0 degree
Genuine no-flag nailing
system for cleaner, better
looking jobs. Ensures positive
delivery of nail every time
The most common and easiest drive.
The diamond point can, however,
contribute to splitting in some
applications
Shear Point
Helps to reduce the splitting
encountered with diamond point
fasteners
Blunt Chisel
Almost eliminates timber splitting. Not
suitable for clinching applications
Conical
Strip Nails: Pro-Strip Paper Tape
No collation material is left on the job site.
Strip Nails: Duo-Fast Round Head Strip Nails
The system enables round head nails
to be collated for 20 degree strip
nailers.
Strip Nails: T Head Nails
Ideal for penetrating steel. Used on nails
in steel framed construction
Typically these nails are constructed from a
band or wire. The nails are covered in a glue
to help protect them from separating.
Fastener Specifications – Brads
Air tool
BRAD HEAD SHAPE
Lost Head
Where a hidden fix is required
BRAD POINT TYPE
Chisel
A common cut style for most brads and
staples
BRAD COLLATION TYPE
D-Head
Tight collation with improved pull
through resistance.
BRAD SHANK TYPES
Smooth – gauges available:
18 Gauge = 1.2mm
16 Gauge = 1.6mm
15 Gauge = 1.8mm
14 Gauge = 2.0mm
Wire diameter indication
Glue Coating
No collation material is left on the job
site. The brads are bound closely
together to maximize magazine
capacity of the tool
Plastic Tape
Plastic tape will not deteriorate in rain
or moisture. Small amount of waste,
only flakes of plastic.
Fastener Specifications– Staples
Air Tool
CROWN TYPES
Narrow Crown
STAPLE SHANK TYPE
Smooth – available in:
Fine wire:23 – 19 gauge; 0.6mm – 1.0mm
Medium Crown
Medium wire: 18 gauge; 1.2mm
Heavy wire: 16 gauge & larger; 1.6mm &
larger
Wide Crown
STAPLE COLLATION TYPE
STAPLE POINT TYPES
Blunt Chisel
Not suitable for clinching applications
Glue Coating
Glue coating – No collation material
is left on the job site. The staples
are bound closely together to
maximize the magazine capacity of
the tool.
Coatings & Corrosion
Classes
Corrosion Classes
Class 1: For internal use
Class 2: For internal use where significant levels of
condensation occurs.
Class 3: For external use in mild industrial and moderate
marine applications.
Class 4: For external use in moderate and severe marine
environments (generally from 100m to 300m from the
beach front).
Applications
Framing
Applications include:
•
wall frames
•
roof trusses
•
floor substructures
•
eaves framework
D – HEAD
Offers similar performance to round head nails
but enables fasteners to be collated hard up
against each other.
Impulse Nail Fuel Packs
JDN Strip Nails
RounDrive
New style of head design allows for tight collation
and ensures much greater holding power.
Impulse Trade Pack
Round
Conventional nail head shape. Best suited to
applications requiring higher pull-through
resistance
Duo-Fast Strip Nails
Roofing - Tile
Applications include:
•
Setting out battens for roof tiling
•
Place roof battens against proud nails
•
Fastening Battens for roof tiling
D – HEAD
Offers similar performance to round head nails
but enables fasteners to be collated hard up
against each other.
Impulse Nail Fuel Packs
JDN Strip Nails
RounDrive
New style of head design allows for tight collation
and ensures much greater holding power.
Impulse Trade Pack
Bracing – Sheet & Metal
Applications include:
•
Plywood bracing
•
Braceboard sheet
•
Strap bracing
•
Metal roof bracing
•
Maxi bracing
Round Head
Conventional nail head shape. Best suited to
applications requiring higher pull-through
resistance
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Dome Head
Offer an aesthetically pleasing result.
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Flooring – Sheeting
Types of sheet flooring include:
•
Particleboard
•
Plywood
D – HEAD
Offers similar performance to round head nails but
enables fasteners to be collated hard up against each
other.
Impulse Nail Fuel Packs
JDN Strip Nails
Round Head
Conventional nail head shape. Best suited to
applications requiring higher pull-through resistance
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Dome Head
Offer an aesthetically pleasing result.
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Metal Connectors & Brackets
Suitable for connectors and brackets such as:
•
Triple grips
•
Tie down straps
•
Multigrips
•
Joist hangers
•
Minigrips
•
Beam hangers
•
Wall brackets •
I-Joist / I-Beam hangers
•
Hanger straps
Round Head
Conventional nail head shape. Best suited to
applications requiring higher pull-through resistance
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Plumbing
Applications include:
•
Fastening noggings for plumbing fittings
•
Fastening bath frames
D – HEAD
Offers similar performance to round head nails
but enables fasteners to be collated hard up
against each other.
Impulse Nail Fuel Packs
JDN Strip Nails
RounDrive
New style of head design allows for tight
collation and ensures much greater holding
power.
Impulse Trade Pack
Electrical
Applications include:
•
Blocking for light fittings
•
Blocking for light switches and power points
•
Fastening noggins or blocking for supporting ceiling fans
D – HEAD
Offers similar performance to round head nails
but enables fasteners to be collated hard up
against each other.
Impulse Nail Fuel Packs
JDN Strip Nails
RounDrive
New style of head design allows for tight
collation and ensures much greater holding
power.
Impulse Trade Pack
Plastering
Applications include:
•
Fastening battens when required for plasterboard
D – HEAD
Offers similar performance to round head nails
but enables fasteners to be collated hard up
against each other.
Impulse Nail Fuel Packs
JDN Strip Nails
RounDrive
New style of head design allows for tight
collation and ensures much greater holding
power.
Impulse Trade Pack
Cladding
Applications include:
•
Fastening weatherboards
•
Fastening blue boards
D – HEAD
Offers similar performance to round head nails but
enables fasteners to be collated hard up against each
other.
Impulse Nail Fuel Packs
Round Drive
New style of head design allows for tight collation and
ensures much greater holding power.
Impulse Trade Pack
Impulse CladFast Handy Pack
Round Head
Conventional nail head shape. Best suited to applications
requiring higher pull-through resistance
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Dome Head
Offer an aesthetically pleasing result.
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Fix Out
Applications include:
•
Panelling
•
Dado rails
•
Staircase trim
•
Handrails
•
•
•
•
Eaves trim
Skirtings
Door jambs
Architraves
ND Series Brads = 14 gauge
DA Series Brads = 15 gauge
C Series Brads = 16 gauge
C1 Series Brads = 18 gauge
Angled Brads = 16 gauge
•
•
•
Window trim
Mouldings
Kitchens
Decking
Applications include:
•
Softwood decks
•
Hardwood decks
DekFast Head – Ring Shank
Offers an aesthetic appearance when counter sunk into
treated pine, gives the look of a round head nail.
DekFast Impulse Value Pack
Dek Fast Handy Pack
DekFast Trade Packs
Round Head – Ring/Screw
Conventional nail head shape. Best suited to
applications requiring higher pull-through resistance
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Dome Head – Ring/Screw
Offer an aesthetically pleasing result.
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Fencing
D – HEAD
Applications include:
•
Softwood fencing
•
Hardwood fencing
Offers similar performance to round head nails but
enables fasteners to be collated hard up against each
other.
Impulse Nail Fuel Packs
JDN Strip Nails
RounDrive
New style of head design allows for tight collation
and ensures much greater holding power.
Impulse Trade Pack
Impulse CladFast Pack
Round Head
Conventional nail head shape. Best suited to
applications requiring higher pull-through resistance
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Dome Head
Offer an aesthetically pleasing result.
Paslode Coil Nails – 15 degree
Duo-Fast Coil Nails – 0 degree
Can we help?
Bunnings welcomes the opportunity to quote your next job.
Please contact your local Bunnings representative or call 133 062.
Download