Page 1 of 1
Date: March 19, 2015
Fastenal Product Standard REV-05
M.LW.HC.MZ
The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety. d1
12.7
16
18
24.4
30.6
32.9
35.8
38.8
44.4
47.1
52.2
d2
Max.
5.6
7
8.8
9.9
9
9
10
10
12
12
14
4
5
5
7
Min.
2
2.4
3.2
3.2
h
Size
M20
M22
M24
M27
M30
M33
M36
M3
M4
M5
M6
M8
M10
M12
M16
20.2
22.5
24.5
27.5
30.5
33.5
36.5
Min.
3.1
4.1
5.1
6.1
8.1
10.2
12.2
16.2
21.2
23.5
26.5
28.5
31.7
34.7
37.7
Max.
3.4
4.4
5.4
6.5
8.5
10.7
12.7
17
Specification Requirements:
• Dimensions:
•
Material &
DIN 7980
Mechanical Properties: Spring Steel; HV 430 to 530
• Finish: Mechanical Zinc per ASTM B695, Class 5, Type 1
Finish shall be in compliance with current RoHS
European Union Directive
10.6
10.6
11.8
11.8
14.2
14.2
16.5
Max.
2.36
2.83
3.78
3.78
4.72
5.9
5.9
8.25