LV Underground Link Box KEY FEATURES • Complete LV switching and Isolating system • Safe and economical to install & operate • Fully submersible • Aesthetically pleasing in ground installation Designed collaboratively with our utility customers, the Tappat underground link box is perfect for new installations or as a like for like replacement for existing bitumen filled link boxes at the end of their asset life. Available untailed or pre-tailed with flexible copper tails ready to joint to existing cables on site. It is available in 2way or 4way configuration with 600amp CAMLOK links included. • Eliminates above ground consent issues • Range taking up to 300mm² mains cable • Fully insulated CAMLOK link • Pit and lid meet B125 & EN124 standards, lid can hold 45Nm/mm2 • Tested to 600 Amps Complete switching & isolating system for LV networks LV Underground Link Box The purpose of the underground link box is identical to that of an above ground link pillar. It allows the network to parallel or isolate low voltage mains cables only this time, using the diving-bell principal, it is housed in a totally submersible underground pit. Perfect for situations where council bylaws stipulate underground installations only. PRE-TAILED 4 WAY LINK BOX Features and Benefits: • • • Aesthetically pleasing in ground installation • • • • • • • • • • • • • • • • Touch safe fittings and no exposed live metal work • • • • • Collaboratively designed with utility customers Depth of pit can be tailored to the requirements of each installation by adding or removing enclosure modules. Fast, safe and economical to install Range taking mains cable up to 300mm2 Accommodates up to four mains cable circuits CAMLOK OPERATING KEY Resin filled cable entry Tinned brass connections eliminate the possibility of corrosion Pit is made of durable HDPE plastic Concrete lid can hold 45N/mm2 & comes with an identification plate cast into it Stabilising base pad included with every kit Complete with circuit I.D. labels Jacking screws allow lid to be adjusted to uneven ground levels. CAMLOK links tested to 600 amps Available pre-tailed if required Fully submersible Tested Diving Bell Lid system Functional switching ability allows for easy sectionalising during fault conditions reducing outage times. 576mm 706mm All products come with a installation instruction and components list On site technical support from TE technical team available Complies with all applicable international standards: EN50393:2006, EC60439.5:2006, Ed2.0, C.81/3:1996 Pit and Lid tested to B125 & EN124 standards Two way version available 500mm Catalogue Ref. Description TAP10710-NZ TAP 4 WAY UNDERGROUND LINK BOX - UNTAILED TAP10710-NZ-TAILED TAP 4 WAY UNDERGROUND LINK BOX - PRE-TAILED Distributed by: TransNet NZ Ltd Freephone: 0800 442 182 Phone: +64 9 274 3340 Email: sales@transnet.co.nz Web: www.transnet.co.nz energy.te.com © 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. TAP10107-NZ 02.14V3 While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.