Pushbutton Units and Indicator Lights SIRIUS 3SB3 Dimension drawings Lampholders (mm) withAccessories separate lamp andtest enclosures function Typical circuits 3SB14 00–2N or 3SB34 00–1F lampholder incl. 130 V incandescent lamp 3SB14 00–2P or 3SB34 00–1G lampholder for incandescent lamps up to 2.6 W or AC/DC LED lamps 3SB14 00–2Q or 3SB34 00–1H lampholder for incandescent lamp to 2.6 W or AC neon bulbs or AC/DC LED lamps 3SB34 00–1L lampholder for incandescent lamp up to 2.6 W or DC LED lamps Typical lamp test circuit with with 3SB14 00–3X or 3SB34 00–1N Application examples for 3SB14 00–3X and 3SB34 00– 1N diode elements Notes on using the lampholders with separate lamp test function • Lamp test circuit, • Interference suppression, • Limiting voltage peaks, • Limiting DC coils, • Diode gates, • Rectifier circuits. When connected in parallel with inductive loads (e.g. contactors), surge suppression required. The diode element contains two 1N 4007 diodes. The element can be snapped onto the gear holder as required. The 3SB14 00–2Q and 3SB34 00–1H elements are not suitable for use with a parallel load. Example of a typical push to test circuit using a standard, illuminated pushbutton transformer type with 1 NO + 1 NC contact. e.g. Illuminated Pilot Light components require to make-up a 120 V red raised push to test transformer type use (1) each of the following components: • 3SB3 001-0BA21 • 3SB3 400-1A Siemens Industry, Inc. Industrial Controls Catalog • 52AABN • 3SB3 400-3M • 3SB3 400-0B • 3SB3 400-0C 10/95