micro automation
SET 9
Drive technology
Flexibly starting, controlling
and monitoring motors
Flexibly starting, controlling and monitoring motors using the
SIMIREL function relay and LOGO! logic module
Micro Automation Sets – ready-to-
•
how complex. SIMIREL function relays offer a wide range of monitoring functions – making
run combinations from the Siemens
them the ideal solution.
•
automation environment.
Quickly implemented automation
tasks at a favorable price in the
Well monitored – reliable motor operation must be guaranteed for every drive task, no matter
And more – the application is nicely rounded-off by intelligently gating the monitoring and
control functions using the functionality integrated in LOGO!
•
For optimized utilization – using the configuration possibilities provided by the Sets, it can
be ensured that several connected pumps or motors are evenly loaded.
world of micro automation simple,
•
directly brought-up on the LOGO! display – guaranteeing a quick analysis of the system and
low-cost and pre-tested in working
therefore shorter downtimes.
•
applications.
In plain text – operating messages, plant and equipment statuses and much more can be
Embark on a new course with Siemens – all of the data and the right contact partners for
the Set, straightforward ordering or planning with different versions, immediately, directly
and simply through www.siemens.com/microset – the fastest way to a working solution.
Controlling
Starting
Monitoring
L1
L2
L3
PC/PG
1
2
M
LOGO!
3
4
5
M
Circuit-breaker
Contactor
No-load/
overload
1 LOGO!: Senses, evaluates, scales and displays messages in plain text (initiated by a function relay);
intelligently controls actuators, operator interface
2 3RV SIRIUS circuit-breakers: Protect motors
3 3RT10 SIRIUS contactors: Switch motors
4 3UG3522 SIMIREL: Monitors motor loads
5 3UG3511 SIMIREL: Detects phase direction, monitors phase failure
Direction of rotation
and phase failure
Applications
• Pump control
• Compressor control
• Cranes
• Hoisting equipment
• Transport equipment
• Fan control
• Vacuum equipment
• Vacuum compressors
• Briquetting equipment
• Crushers
Technical component data
1
LOGO! Logic module
Supply voltage
Digital inputs/outputs
Analog inputs
2
3RV SIRIUS circuit-breakers
Rated operating voltage
Rated current
Short-circuit interrupting capacity
For three-phase motors
3
up to 690 V
up to 100 A
up to 45 kW
3UG3522 SIMIREL current monitoring relay
Rated operating voltage Vs
Voltage tolerance
Measuring ranges
Measuring current frequency
Threshold value
Delay time
– T2 switch-in delay
– T1 until the threshold value is reached
5
690 V
up to 100 A
50/100 kA
up to 45 kW
3RT10 SIRIUS contactors
Switching voltage
Switching current
For three-phase motors
4
12 V DC, 24 V AC/DC, 115/230 V AC/DC
8 DI/4 DO (relay) can be expanded up to 24 DI/16 DO
2 AI, range 0...10 V, can be expanded up to 8 AI
230 V AC, electrical isolation using a transformer
0.85 to 1.15 x Vs
0.1 to 10 A (3 ranges)
40 Hz to 500 Hz and DC
10% to 100% of the selected measuring range (1 A; 5 A, 10 A)
1 s to 20 s ± 10%
0.1 s to 3 s ± 10%
3UG3511 SIMIREL phase monitoring relay
Rated operating voltage Vs
Voltage tolerance
Frequency of the monitored line supply
Delay time
- T1 for a correct phase sequence
- T2 for phase failure
3 x 230 V to 400 V, phase-to-phase
3 x 200 V to 460 V, corresponds to 0.85 up to 1.15 Vs
50 Hz/60 Hz
max. 200 ms
approx. 300 ms
Visit www.siemens.com/microset for more information
MICRO AUTOMATION SET – your planning tool
Choose from implementation plans that have proven success. You will find all the necessary
components for the application (Micro Automation Set) in this overview, and also in the Internet.
Order No.
1
6ED1052- 1 F B 0 0 - 0 B A 3
2
3RV SIRIUS circuit-breakers
3RV 1 0 1 1 - 0 K A 1 0
3
3RT10 SIRIUS contactors
3RT10 1 5 - 1 A P 0 1
4
3UG3522 SIMIREL current monitoring relay
3UG3522- 1 A L 2 0
5
3UG3511 SIMIREL phase monitoring relay
3UG3511- 1 B Q 5 0
Configuring software/tools
Order No.
LOGO! SoftComfort V3.1
6ED1058-0BA00-0YC3
LOGO! PC cable
6ED1 057-1AA00-0BA0
Comments/Versions
Your MICRO AUTOMATION SET in the Internet
www.siemens.com/microset
Subject to change without prior notice 03/02
Contact partners, ordering data, and version information, as
well as additional information and examples are provided under:
Order No. E20001-A690-P273-X-7600
Helpline: +49 180 5050 111
|
For further information please contact your local Siemens
partner , or local Siemens distributor.
If you do not know your Siemens partner please contact
the helpline.
|
Your contact for the MICRO AUTOMATION SET
Dispostelle 06307
|
Product
LOGO! Logic module
|
Your
MICRO1AUTOMATION
SETdazu
– everything
MICROSET
– Alles, was Sie
brauchenthat you need
21C7543 MK.AS.MS.XXXX.52.215 WS 04022.
the appropriate ordering data for specific component versions under www.siemens.com/microset.
Printed in Germany
In cases where you require versions that are adapted to your particular system requirements, obtain
Recommended by
Siemens AG
Automation and Drives
Postfach 48 48
D-90327 Nürnberg
Germany
w w w. s i e m e n s . c o m / m i c ro s et