millenium™ round

advertisement
PROJECT INFORMATION
MILLENIUM™ ROUND
Job Name
Fixture Type
MR17 SERIES – HIGH PERFORMANCE AREA LIGHT
Catalog Number
Approved by
PRODUCT FEATURES:
»»Surface mount – ceiling or wall; 17"Dia. ×9"D
»»Peace of Mind Guarantee® against breakage
»»Dust and water protected to IP64 standards
»»Type V Rectangle distribution (MR17RP)
Type V Square distribution (MR17SP)
RP
SP
SPECIFICATIONS
HOUSING: Marine grade die-cast aluminum. Rib reinforced construction. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and
resistance to prying. Housing provided with four-point mounting holes, one wireway hole and temporary junction box mounting drill points – See Installation Detail. Standard black, bronze or white
exterior TGIC polyester powder coat – 5-step pre-treatment. See Ordering Information for optional finishes.
REFLECTOR: Precision designed semi-specular reflector. Works in conjunction with lens optics to provide a type V distribution for narrow passages or a type V square distribution for area lighting
with minimal light trespass.
LENS: UV-stabilized, high impact resistant, virgin injection molded clear polycarbonate lens. The high efficiency lens is designed to enhance appearance without beam scatter. Close tolerance push/
turn/lock-in-place mating of injection molded base and lens facilitates set up and installation. Base and lens secured with one concealed captive Torx® with center pin fastener.
LENS BASE: Lens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate. Optional Light Gray, Silver, Forest Green or Custom
Color (see Ordering Information below) are chemically bonded, impact resistant finishes.
GASKETING: Die-cut, closed cell neoprene self adhesive gasket seals housing to mounting surface. Closed cell, silicone “O” ring gaskets positioned and friction secured in gasket channels of lens
base and housing.
HARDWARE: One stainless steel Torx® with center pin fastener.
ELECTRICAL: HID ballasts high power factor. Shock absorbing, medium base lamp sockets provided for HID lamps.
WARRANTY: Standard four-point mounting and polycarbonate lens required for Peace of Mind Guarantee®.
LISTINGS: UL and CUL listed for Wet Location. UL certified IP64 per IEC 60598.
IP64
ORDERING INFORMATION (Ex: MR17SP-C-MW-70S-1-120)
Model
Lens Type
Finish
Lamp Type
Lamp Qty
C
Model
MR17RP Type V (Rectangle)
MR17SP Type V (Square)
Lens Type
C
Clear Polycarbonate
Voltage
Options
Accessories
1
Finish
MB Matte Black
MW Matte White
DB Dark Bronze
LG Light Gray
SLSilver
FG Forest Green
CC Custom Color (Consult factory)
Lamp Quantity
1 One Lamp
Lamp Type (Qty/Ballast/Volt./Starting Temp)
50M† 50 Watt MH (1/HPF/120,277,347/-20°F)
(MR17RP only)
50S 50 Watt HPS (1/HPF/120,277/-40°F)
70M† 70 Watt MH (1/HPF/120,277,347/-20°F)
70S 70 Watt HPS (1/HPF/120,277,347/-40°F)
100M† 100 Watt MH (1/HPF/120,277,347/-20°F)
100S 100 Watt HPS (1/HPF/120,277,347/-40°F)
150S 150 Watt HPS (1/HPF/120,277,347/-40°F)
www.kenall.com
P: 800-4-Kenall
Accessories
BPC Photo Control –
Shielded Button Type (120 Volt only)
9009 100 Watt DC Bay Quartz Lamp
50QL 50 Watt Candelabra Base
Quartz Lamp
9500Torx® Screwdriver
Voltage
120 120 Volts
277s 277 Volts
347s 347 Volts
Options
FS Single Fuse & Holder
NAT Natatorium Environment Option
† UV shielding lamp supplied
QR Quartz restrike system for maximum
* Configured to accommodate two
100 Watt DC bay quartz lamp (see 9009)
emergency quartz lamps
QRC Hot/Cold Quartz restrike
(50W max). Lamps by others.
s
QS Quartz socket only
n/a with BPC
RAK Remote Arc Keeper (100M and 150M lamp types only)
XAC* Auxiliary Emergency Lighting (120V AC)
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2013 Kenall Mfg. Co. All rights reserved.
MR17_RP_SP-110813
For additional photometry, go to www.kenall.com
MILLENIUM™ ROUND
MR17 SERIES – HIGH PERFORMANCE AREA LIGHT
DIMENSIONAL DATA
CROSS SECTION / DETAILS
(4) 3/4"
NPT (Plugged)
(1) 3/4"
NPT (Not Plugged)
17.64"
17.64"
RP
SP
www.kenall.com
P: 800-4-Kenall
8.44"
F: 847-360-1781
7.00"
10.00"
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2013 Kenall Mfg. Co. All rights reserved.
MR17_RP_SP-110813
Download