®
SIMPLIFIED LIGHTING
CONTROL SOLUTIONS
ROOM CONTROLLER
Dialog Room Controller introduces specifiers and contractors to
a versatile solution for stand-alone or networked lighting control
applications. Douglas Lighting Controls® brings their industry leading
controls experience to provide you with the flexibility, value, and
engineering expertise that you demand. The Dialog Room Controller,
manages classrooms, offices, conference rooms or small rooms to
meet local and national lighting requirements such as ASHRAE 90.1
(2010), California Title 24 (2013).
The Dialog Room Controller incorporates 2 sections – the Room
Controller and the UL924 Relay Expansion Pack. The Room Controller
is the main device and it includes four relays, four independent dimming
channels and the capability to connect to a Douglas Lighting Controls
Dialog or BACnet network. When the need for emergency lighting
control or additional relays arises because of room size or lighting
requirements, the Room Controller UL924 / Relay Expansion Pack is
easily added by clipping it to the bottom of the room controller and
connecting to the appropriate loads. The expansion pack provides
two additional relays that are certified for emergency lighting operation
or can be used for additional lighting loads.
C o m p li a n t
-
-- - - ----
--
24
TITLE
--
-------
lifornia- -
- - Ca
-
ASHRAE 90.1-2010
FEATURES
½ INCH CHASE NIPPLES
RJ45 PORT FOR BACNET
IP CONNECTIVITY
CIRCUIT TEST BUTTONS
STATUS & LOCATOR LED
LABELED LOW VOLTAGE WIRING COMPARTMENT
EASY BREAK
WIRING KNOCKOUTS
& ACCESS TABS
COLOR CODED WIRES
½ INCH CHASE NIPPLES
•
•
•
•
•
CLIP CONNECT RELAY
EXPANSION/UL924
EMERGENCY
LIGHTING PACK
WIRE COLOR MATCHING RELAY LABELS
Configured “Kits” for specific room design and lighting control
Plug ‘N Control up to 6 different loads (lighting, receptacle,
emergency lighting)
Plug ‘N Control up to 4 dimming channels independent of
lighting loads
Wiring verification via on-board test buttons
On-device color coded labels and wiring instructions
toll free: 1-877-873-2797
direct: 1-604-873-2797
•
•
•
•
•
•
WIRING INSTRUCTIONS
PUSH-CONNECT
DIMMING AND DATA
TERMINALS
Installation directly to junction box
Low cost, simple to install, polarity neutral 2-wire network
Networkable with Dialog or BACnet IP
UL and CSA certified
UL924 certified for Emergency Lighting
Plenum rated in USA and Canada
lighting@douglaslightingcontrols.com
www.douglaslightingcontrols.com
Douglas Lighting Controls is a member of the Panasonic Group
DIMENSIONS
Dialog Room Controller is installer friendly, allowing for
simple no polarity 2 wire control wiring. We wanted
to make things simple, the units are available in preconfigured “rooms” (see our application guide for more
details) that arrive to you fully commissioned – just
Plug ‘N Control your room! Kits can include the Room
Controller, the UL924 Expansion Pack, occupancy/
vacancy sensors, daylight sensors, and switch stations
based on the application. An added feature of the Dialog
Room Controller can also be used in a centralized Dialog
system to create a globally controlled network that is
faster to install, requires less long wire/conduit runs,
and provides room-by-room testing before complete
system start-up. To further ease installation all wires
and connectors are color coded for quick identification
and time saving completion of the installation.
2.1”
(54mm)
5.7”
(144mm)
4.3”
(109mm)
6.1”
(155mm)
WEIGHT 1.15lbs (0.52kg)
6.3”
(159mm)
For product ordering information please see website.
STAND-ALONE ARCHITECTURE: Classroom example
Daylight Sensor
Teacher Station
NATURAL LIGHT
FUNCTIONALITY
•
•
•
•
•
Dialog Room Contoller
•
Entry Station
Occupancy/Vacancy Sensor
•
SIMPLE
INSTALLATION
•
•
•
•
•
•
•
Configured “Kits” for Plug ‘N
Control right out of the box
½” chase nipples for junction
box installation
Color coded line voltage wires
Color coded labels that match
wire colors
Push-connect low voltage
terminal blocks
Factory programmed for out-ofthe-box Plug ‘N Control™
Polarity neutral, 2-wire (#18AWG)
low voltage network
Neutral not shown - these illustrations are for
reference purposes only. For site installations,
please review Kit wiring diagrams and follow
local and national electrical codes.
Line Voltage (lights)
Lighting Control
(including Emergency lighting)
Receptacle Control
Closed Loop Dimming
Manual Control
Control up to Six Loads
(Lights, Receptacle,
Emergency Lights)
Control up to Four 0-10v
Dimming Zones (independent
of light zones)
Demand Response Ready
Line Voltage (receptacle)
4.0 EMERGENCY + RECEPTACLE INSTALLATION
Loads
Daylight Sensor
Occupancy Sensor
Wall Switches
1
2-Wire Network
2
Dimming Zone 1
3
Dimming Zone 2
Dimming Zone 3
EM
1
Dimming Zone 4
EM
2
Line Voltage (lights) with
emergency backup power
toll free: 1-877-873-2797
direct: 1-604-873-2797
lighting@douglaslightingcontrols.com
www.douglaslightingcontrols.com
Douglas Lighting Controls is a member of the Panasonic Group