NZQA Expiring unit standard 8191 version 6 Page 1 of 3 Title

advertisement
NZQA Expiring unit standard
8191 version 6
Page 1 of 3
Title
Demonstrate systematic and logical fault finding techniques in
electronic products or systems
Level
3
Purpose
Credits
4
This unit standard covers basic fault finding in electronic
products or systems in a systematic and logical manner.
People credited with this unit standard are able to:
− identify relevant symptoms of fault; and
− apply logical and systematic techniques to identify location
and cause of fault.
Classification
Electronic Engineering > Electronic Installation and
Maintenance
Available grade
Achieved
Explanatory notes
1
This unit standard has been developed for training and assessment in the workplace,
or off-job with realistic simulations.
2
References
Electricity Act 1992;
Electricity Regulations 1997;
Health and Safety in Employment Act 1992 and associated regulations;
and their subsequent amendments and replacements.
3
Range
a
Faults may be at the level of electronic components, printed circuit boards,
cards, or other units or elements within larger systems, such as
telecommunication systems.
b
The emphasis is on diagnosis by use of logical analysis of symptoms,
observation, and measurement, rather than by trial and error.
c
Observance of electrical and workshop or laboratory safety practices is an
essential part of assessment.
d
Evidence of location of five faults is required.
The Skills Organisation
SSB Code 100401
© New Zealand Qualifications Authority 2014
NZQA Expiring unit standard
8191 version 6
Page 2 of 3
Outcomes and evidence requirements
Outcome 1
Identify relevant symptoms of fault.
Evidence requirements
1.1
Relevant symptoms are established by direct observation, and by questioning of
users or customers where appropriate.
Range
1.2
symptoms may include but are not limited to – visual, sound,
smell, heat, timing of occurrences, loss of functionality,
intermittency.
Judgement of fault cause is withheld until proven by tangible fault finding data.
Outcome 2
Apply logical and systematic techniques to identify location and cause of fault.
Evidence requirements
2.1
Fault location and cause are found through analysis of symptoms, observation
and measurement.
Range
use of manufacturer’s diagnostic data is permissible.
2.2
The logic of the method used to find the fault is explained.
2.3
The diagnostic process does not compromise the integrity of the product or
system.
Replacement information
This unit standard has been replaced by unit standard
26727.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
The Skills Organisation
SSB Code 100401
© New Zealand Qualifications Authority 2014
NZQA Expiring unit standard
8191 version 6
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
29 October 1996
31 December 2016
Revision
2
3 April 2001
31 December 2016
Review
3
24 November 2003
31 December 2016
Rollover and
Revision
4
22 August 2008
Review
5
21 July 2011
31 December 2016
Reinstatement
6
17 April 2014
31 December 2016
31 December 2016
0003
Consent and Moderation Requirements (CMR) reference
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
The Skills Organisation
SSB Code 100401
© New Zealand Qualifications Authority 2014
Download