n
or
de
re
alwusa.com/lp35r
s
Find additional images and information at
w
LP3.5R | Recessed
d
LIGHTPLANE 3.5
S ip t ion
Q kSbhle L "QS" op
c i L
ui E l i g i t h A
he
Q
W
SPECIFICATIONS
LIGHTPLANE 3.5 – LP3.5R
Recessed
SPECIFICATIONS
1. BASE MODEL
LP3.5RT *
QS
LP3.5RTDL 2
QS
LP3.5RTRL*
QS
LP3.5RMUD* QS
LP3.5RHF *3
QS
LP3.5RPF *1
QS
LP3.5RPR*1
Page 2 of 7
3.5” trimmed with flush lens
3.5” trimmed with drop (reveal) lens
3.5” trimmed with regressed lens
3.5” trimless, mud-in with flush lens
3.5” trimless, hidden-flange with flush lens
3.5” perimeter, flush-mount
3.5” perimeter, regressed-mount
Type:
1
Skip CEILING TYPE (leave blank); go to OVERALL RUN LENGTH
2
Accent Downlight(s) not available with drop (reveal) lens
3
Not available with ceiling type DRY below.
Select only with GRID, SLOT, ATZ/TGRID, ATZ/SLOT or OTHER.
2. RUN LENGTH/
SIZE
___
___
QS
QS
Individual (2’, 3’, 4’, 5', 6’, 7’ or 8’)
Continuous row or Configuration4(enter total linear length, ex: 20’)
4
A configuration is a custom shape (rectangle square, L, etc.) with mitered corners.
Must choose quantity of mitered corners in Additional Options.
3. CEILING TYPE
All lengths are nominal and may vary based on lamping and other
specfication selections. Consult factory when exact lengths are required.
DRY5
QS Drywall
TGRID
QS T-Grid
SLOT
QS Slot T-Bar
ATZ/TGRID
QS Armstrong ® Techzone T-Grid
ATZ/SLOT
QS Armstrong ® Techzone Slot T-Grid
OTHER
Additional ceiling types may be available. Contact factory.
TGRID
5
Select only with LP3.5RT, LP3.5RTDL, LP3.5RTRL and LP3.5RMUD
SLOT
Continued on Next Page...
*Lightplane 3.5 Recessed is a DesignLights Constortium Qualified Product when configured
as: LP3.5RXX-XX-XX-MED/3500K-0/10V/10%-WD-XX-UNV (Qualified at 120V only)
Verify configuration by searching for "Architectural Lighting Works" at designlights.org/qpl
QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the
configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 3.5 – LP3.5R
Recessed
SPECIFICATIONS
4. LAMPING –
PRIMARY
Page 3 of 7
NONENone. Select when specifying only Accent Downlight Lamping
LED6
Pair lamping with CCT (where applicable), ex: MED/2700K
LOW7
QS Low-output, high-performance LED – 517 delivered lm/ft, 7.4 W/lf, 70 lm/W
2700K
QS 3000K QS 3500K QS4000K
MED
QS Medium-output, high performance LED – 689 delivered lm/ft, 9.8 W/lf, 70 lm/W
2700K QS 3000K QS 3500K QS4000K
7
HI QS High-output, high-performance LED – 861 delivered lm/ft, 12.2 W/lf, 70 lm/W
2700K QS 3000K QS 3500K QS4000K
TUNE 8
Tunable white LED, 2700K-5700K – 574 delivered lumens, 8.2 W/lf, 70 lm/W
(must select DMX driver below; controller not included)
DECOR7Decorative constant voltage LED – 252 delivered lm/ft, 5.9 W/lf, 43 lm/W
3000K
3500K
4000K
RGB
Color-changing RGB LED – 5 W/lf
(must select DMX driver below; controller not included)
6
LED board options may be limited and/or subsituted to accomodate requests
for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory.
7
Performance calculations are extrapolated estimates based on the actual
IES test results of MED option at 3500K
8
Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs
based on the actual IES test results of MED option at 3500K. Cooler and warmer CCT
settings will provide lower delivered lumens, lower lm/W and higher W/lf.
FLUORESCENT Lamps not provided
1T5
1T5HO
1T5S9
1T5HOS9
Standard output, 1-lamp profile T5
High output, 1-lamp profile T5
Standard output, 1-lamp profile T5, staggered
High output, 1-lamp profile T5, staggered
9
5. DRIVER –
PRIMARY
NONE
LED
For staggered lamping, EXT lens is recommended for maximum diffusion properties
None. Select when specifying only Accent Downlight Lamping
0/10V/
QS 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
QS 10% Dimming to 10% QS 1% Dimming to 1% 0% Premium dimming to 0%
DALI
DALI dimming to 0%
DMX
DMX dimming to 0%
HILUME/A3
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
FLUORESCENT
STD
FL/0/10V
HILUME BALLASTAR
Standard, non-dimming, <10% THD
Dimming, 0-10V
Lutron Hi-Lume® dimming
Step-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration
Consult ballast manufacturer for lamp compatibility
QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the
configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 3.5 – LP3.5R
Recessed
SPECIFICATIONS
6. LENS/LOUVER –
PRIMARY
Page 4 of 7
NONE None. Select when specifying only Accent Downlight Lamping
WD10Frosted
EXT
QS Extra diffuse
EXT/ASY/LED11 Extra diffuse with asymmetric distribution, flush (LED lamping only)
10
7. ACCENT
DOWNLIGHT
LEDs may be visible when dimmed; recommended for use with LED lamping
only when DLC-listing is necessary OR for use with fluorescent lamping
EXT/ASY/LED
11
Available only with LP3.5RT, LP3.5R/MUD and LP3.5R/HF
Reflector and
LED board
are angled
providing
NONE
QS None. Select when specifying only Linear Lamping
asymmetric
MR16/LED GU5.3 base for retrofitting with MR16 LED (lamps not included)
distribution on
Lamp transformer and compatibility shall be checked by others.
wall surface
ALW will provide transformer information on submittal drawings.
CZEN800
CZEN100012 LED COB Downlight, 9.5 W, 790 lm, 40° beam, 3000K
LED COB Downlight, 12.7 W 1040 lm, 40° beam, 3000K
12
No angle adjustment
lm = raw lumens; Watts include driver loss
8. DRIVER –
ACCENT DOWNLIGHT
NONE
QS None. Select when specifying only Linear Lamping OR MR16/LED
0/10V/
0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10%
HILUME/A3
1% Dimming to 1%
0% Premium dimming to 0%
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver specifications provided upon request to assist with control system integration
9. ACCESSORY –
ACCENT DOWNLIGHT
NONE QSNone.
LSS
Linear spread lens
SOL13 Solite lens
HEX
Hexcell louver
SNT
Snoot
LINEAR
SPREAD LENS
SOLITE LENS
HEXCELL
LOUVER
SNOOT
Select one only. For different accessory types on different downlights, contact factory.
13
10. QUANTITY –
ACCENT DOWNLIGHT
Standard in CZEN800, CZEN1000
NONE QSNone. Select when specifying only Linear Lamping OR MR16/LED driver
___
Enter total quantity downlights per run length
For total quantity considerations, please note each
downlight requires 7.25” of linear length in the housing
QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the
configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 3.5 – LP3.5R
Recessed
SPECIFICATIONS
11. FINISH
AL
QS
BK QS
WH
QS
RAL/ ___ Standard, natural “Ultimatte” aluminum
Black powdercoat
White powdercoat
Specify RAL powdercoat code (ex: #RAL/3003)
12. VOLTAGE
12014
27715
UNV
QS
120 volt
277 volt
Universal voltage
Page 5 of 7
14
For MR16/LED dimming, consult LED retrofit lamp manufacturer
for voltage dimmer compatibility
15
Dimming with 277 volt not recommended for LED retrofit lamps.
For dimming with CZEN800 or CZEN100 lamps using 277 volt,
HILUME/A3 or 0/10V/0 driver must be specified.
13. ADDITIONAL
OPTIONS
NONE
QS
EMC/__16
QS
EMB/__16
QS
ENLGHT/__17,18 QS
OS/__18
PH__18
MC/__
QS*
None
Emergency circuit (indicate total quantity, ex: EMC/4)
Emergency battery pack (indicate total quantity, ex: EMB/4)
Enlighted ® embedded smart sensor (occupancy, daylight, networking and more)
0-10V embedded occupancy sensor (indicate total quantity, ex: OS/4)
0-10V embedded photocell/daylight sensor (indicate total quantity, ex: PH/4)
Mitered corners (indicate total quantity, ex: MC/4 for a rectangle)
16
Consult factory for available options
Enlighted Gateway and Energy Manager (by others) plus programming required.
Learn more at enlightedinc.com.
18
Select quantity of 1 for every 8 ft. (ex:ENLGHT3 for a 24' fixture run; OS4 for a 32' fixture run)
*45˚ mitered cuts forming 90˚ corners only for QuickShip qualification
17
QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the
configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 3.5 – LP3.5R
Recessed
SPECIFICATIONS
Page 6 of 7
DIMENSIONS
TRIMMED
3 15⁄16"
3 13⁄16"
3 13⁄16"
5"
4"
5 1 ⁄4 "
5"
4 3 ⁄8 "
⁄ "
5 3⁄16"
11 16
5 1 ⁄4 "
6"
LP3.5RT
LP3.5RT
TGRID
3 13⁄16"
LP3.5RTRL
TGRID
ATZ/TGRID
5"
3 15⁄16"
LP3.5RT
DRY
3 13⁄16"
3 13⁄16"
4"
4"
5"
5"
5 ⁄16"
6"
11
LP3.5RT
4 3 ⁄8 "
⁄16"
5 ⁄ "
11
3 16
5 11⁄16"
LP3.5RT
SLOT
LP3.5RTRL
ATZ/SLOT
SLOT
TRIMLESS
PERIMETER
3 13⁄16"
3 11⁄16"
3 11⁄16"
3 13⁄16"
6 13⁄16"
⁄"
12
3 11⁄16"
3 11⁄16"
5 7⁄16"
4 9⁄16"
4"
6 3 ⁄8 "
5"
LP3.5RMUD
LP3.5RPF
LP3.5RHF
TGRID and SLOT
DRY
LP3.5RPR
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 3.5 – LP3.5R
Recessed
SPECIFICATIONS
HOUSING
Page 7 of 7
LINEAR LENS OPTIONS
100% recyclable, extruded architectural grade
T6061 aluminum with .08" minimum wall thickness.
Extruded, twin-layered, high-impact acrylic. EXT is
white and extra diffuse with no-source visibility. WD is
lightly frosted with greater light output, but possible
source visibility. Choose from flush, drop (reveal) or
regressed assembly.
ELECTRICAL
Fluorescent ballasts are <10% THD Class P.
Programmed-start standard. LED drivers
are Class 2. LED light engine is LM-80
compliant with 80+ CRI. ETL listed for damp
location with lens.
EMERGENCY
Luminaires can be wired for emergency circuit
and/or emergency battery backup. Consult factory
for details.
DOWNLIGHT ACCESS
MITERED CORNERS
Downlights are centered
a in 7.5" long, hinged
panel that opens to
provide access for lamp
installation, replacement
and/or maintenance
Consult factory
for mitered corner
angle options
FLUSH LENS
DROP (REVEAL) LENS
FINISH
Standard finish is "Ultimatte" aluminum — a smooth,
clean and durable finish achieved from a deep-etch
and two-step clear anodizing process. White, black
and color RAL powdercoat options also available.
DOWNLIGHT AIMING
PERPENDICULAR
MR16/LED 35˚
CZEN800 5˚
CZEN1000 0˚
PARALLEL
MR16/LED* 65˚
CZEN800 25˚
CZEN1000 0˚
ALUMINUM – AL
WHITE – WH
BLACK – BK
COLOR – RAL
*Angle may vary based
on specific lamp used
DOWNLIGHT ACCESSORIES
LINEAR
SPREAD LENS
SOLITE LENS
HEXCELL
LOUVER
SNOOT
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n