LIGHTPLANE 3.5
RECESSED
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa .com
LIGHTPLANE 3.5 – Recessed
Page 1 of 4
Specification and Ordering Information:
TYPE:
1. Style:
*LP3.5RT - Trim with Flush Lens (LP3.5RT)
**LP3.5R - Trimless with Flush Lens(LP3.5R)
*LP3.5RTDL - Trim with Drop Lens (LP3.5RTDL)
*LP3.5RTRL - Trim with Regressed Lens(LP3.5RTRL)
*LP3.5RP- Perimeter Mount Regressed (LP3.5RP)
*LP3.5RPF- Perimeter Mount Flush (LP3.5RPF)
*Available with Trim Only
**Plaster surface only
2. Mounting:
DRY - Drywall (DRY)
*TGRID Exposed T-Grid -15/16” (TGRID)
*SLOT - TRIM Exposed Slot T-Grid -9/16” (SLOT)
*HDI - Hunter Douglas® Integrated - Consult Factory (HDI)
*ATZ-SLOT - Armstrong® Techzone -see chart on next page
*ATZ-TGRID Armstrong® Techzone -see chart on next page
SEAMLESS SLOT - 15/16th Tegular, hidden flange (SEAMLESS SLOT)
SEAMLESS TGRID - 15/16th Tegular hidden flange (SEAMLESS TGRID)
SEAMLESS WOOD/METAL- Wood/Metal , No exposed Trim
(SEAMLESS WOOD/METAL)
OTHER- Specify Complete Detail
*Available with Trim Only
ALL PROFILES AVAILABLE IN ONE OR TWO LAMP CROSS SECTIONS
LP3.5RT (WITH
TRIM) FLUSH
LENS
FRSO - Fluorescent Standard Output, 1-Lamp profile T5 (FRSO)
FRHO - Fluorescent High Output, 1-Lamp profile T5 (FRHO)
FSSO - Fluorescent Staggered 1-Lamp Profile T5, Standard Output (FSSO)
FSHO - Fluorescent Staggered 1-Lamp Profile T5, High Output (FSHO)
FRSO/2X - Fluorescent Standard T5, 2-Lamp Profile, non-stagger (FRSO/2X)
FSSO/2X - Fluorescent Standard T5, 2-Lamp Profile, Stagger (FSSO/2X)
****LX - Fluorescent T5 Seamlessline - Standard Output (LX)
****LXHO - Fluorescent T5 Seamlessline - High Output (LXHO)
FRT8 - Fluorescent T8 (FRT8)
FST8 - Fluorescent Staggered 1-Lamp Profile T8, (FST8)
FRT8/2X - Fluorescent T8, 2-Lamp Profile, non-stagger (FRT8/2X)
FST8/2X - Fluorescent T8, 2-Lamp Profile, Stagger (FST8/2X)
***Raw lumens and system watts information when both warm white
and cool white LEDs are at 100%. DMX drivers are recommended to halve
driver numbers.
****See Option 1A
For Staggered lamping, it is recommended to use the EXT lens for
maximum diffusion properties - HIGH OUTPUT STAGGER NOT RECOMMENDED
due to brightness at overlap
Raw lumen and system watts (with driver loss included for all other LEDs)
3 11
16 "
LP3.5RTRL
(WITH TRIM)
11/16” REGRESS
1
2"
3 11
16 "
1
2"
7
"
4 16
4. Linear Lamping
N/A - Open channel for downlighting only (N/A)
HP900- 900 Lm/ft High Performance LED 7W/LF (HP900 - Old HP7)
2700K
3000K
3500K
4000K
LP3.5RT (GRID)
HP1200 -1200 Lm/ft High Performance LED 9W/LF (HP1200-Old HP10)
2700K
3000K
3500K
4000K
HP1500 -1500 Lm/ft High Performance LED 14.5W/LF (HP1500-Old HP14)
2700K
3000K
3500K
4000K
SP900- 900 Lm/ft Standard Performance LED 9W/LF (ISP900)
***SPTW1000- 1000 Lm/ft Tunable White 2700K to 5700K LE D 11W/LF (SPTW1000)
CV450- Decorative, 440 Lm/ft, Constant Voltage LED 6.5W/LF (CV450)
3000K
4000K
CV900- Decorative, 880 Lm/ft, Constant Voltage LED 13W/LF (CV900)
LP3.5RTDL
3000K
4000K
(WITH TRIM)
RGB - LED Color Changing 5W/LF - Consult Factory for Con trol Interface
5/16” DROP
Options (RGB)
3 11
16 "
3 11
16 "
3. Overall Run Length:
Individual (2’,3’,4’,5’,6’,7’,8’)
Continuous (Enter total run length, i.e 20’)
1
2"
1
2"
LP3.5R (TRIMLESS)
- SHOWN WITH
MUDDING WINGS
FOR DRYWALL
INSTALLATION
3
68"
13
3 16 "
5
8"
5 161 "
LP3.5RP - PERIMETER REGRESSED
- 3.5” UNIT FITS INTO PERIMETER
ASSEMBLY
7 16 "
9
1
2
"
3 "
11
16
LP3.5RPF - PERIMETER FLUSH
(WITH TRIM)
4 38 "
11
3 16
"
5"
Continued on Next Page
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa .com
3
4
"
Ceiling
LIGHTPLANE 3.5 – Recessed
Page 2 of 4
5. Linear Driver/Ballast Specification:
TYPE:
*LED - LED Power Supply, non-dim (LED)
*0-10V- LED Power Supply with 0-10V dimming (0-10V)
10% Standard Dim Option
1% Dimming Option
0% Premium Option
*LED-DALI - LED Power Supply with DALI dimming 0%-100% (LED-DALI)
*LED-DMX - LED Power Supply with DMX dimming 0%-100% (LED-DMX)
*RGB-DMX- RGB with DMX Interface module 0%-100% DMX cont roller not included (RGB-DMX)
*HILUME-A2- Lutron Hi-lume ® A LTE Series LED line voltage 2-wire control (120v only) 1%-100% (HILUME-A2)
*HILUME-A3- Lutron Hi-lume ® A L3D Series LED EcoSystem® or 3-wire control 1%-100% (HILUME-A3)
STD - Standard Electronic, non-dim <10%THD (STD)
37° Left or Right
FG0/10V - Fluorescent Dimming 0-10V (DIM)
55° Up or Down
HILUME - Lutron Hilume Fluorescent Dim (HILUME)
BALLASTAR- Fluorescent Step-Down (BALLASTAR)
Shown: Adjustable 7.25” Downlight MR16
*OPTION FOR LINEAR LED ONLY
Option - Note Aiming angles may vary
Please consult ballast manufacturer for
depending on LED source.
lamp/ballast compatibility.
6. Linear Lens Options:
*WD - Frosted lens - Limited Availability with HP Series and SP900 LEDs Only. LEDs might be visible when
dimmed (WD)
EXT - Extra Diffuse Lens (EXT)
BLANKS- Fill All Blanks with Filler Panels (BLANKS)
LV - Bladed Louver (LV)
CZEN800
20deg
CZEN1000
aiming
no aiming on
perpendicular
axis
*Not recommended with fluorescent lamps due to lamp socket shadowing.
7. Downlight Option (leave blank if none):
MR16 - 50 W MR16 Halogen (MR16)
f
LED MR16 - Retrofit LED MR16 GU5.3 Base, Transformer: Lamp transformer
and compatibility shall
be checked by others. ALW will provide electronic transformer in ormation on submittal drawing (LED MR16)
GX1020- 20W CMH-MR16 GX10 Base(GX1020)
GX1039- 39W CMH-MR16 GX10 Base(GX1039)
CZEN800- LED COB Downlight, 9.5W, 790LMS, 40deg beam, 3K CCT(CZEN800- Old CZEN7)
*CZEN1000- LED COB Downlight, 12.7W 1040LMS, 40deg beam, 3K CCT(CZEN1000- Old CZEN10)
*No adjustment on perpendicular axis
Raw lumen and system watts (with driver loss included)
8. LED Downlight Driver Specification:
*HILUME-A2- Lutron Hi-lume® A LTE Series LED line voltage 2-wire control 120v only 1%-100% (HILUME-A2)
Shown: Corner Options in Wall and
HILUME-A3- Lutron Hi-lume ® A L3D Series LED EcoSystem® or 3-wire control 1%-100% (HILUME-A3)
Ceiling Available - Consult Factory
0-10V- LED Power Supply with 0-10V dimming (0-10V)
10% Standard Dim Option
1% Dimming Option
0% Premium Option
LED-DALI - LED Power Supply with DALI dimming 0%-100% (LED-DALI)
LED-DMX - LED Power Supply with DMX dimming 0%-100% (LED-DMX)
*120V only. Consult dimming control manufacturer for compatibility with Lutron Hi-lume A LTE forward phase control LED
driver
9. Downlight Quantity:
Enter total quantity downlights per run length
Leave blank if none
Outer Dimensions of Each Downlight is 7.25”
10. Downlight Accessory options (Leave blank if no downlights/linear only):
LSS - Linear Spread Lens (LSS)
SOL - Solite Lens (SOL)
SNT - Snoot (SNT)
HEX - Hexcell Louver (HEX)
11. Finish:
* AL (Natural “Ultimatte” aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
*AL is standard on all Lightplane 3.5 product
12. Voltage:
*120 - 120 volt (120)
**277 - 277 volt (277)
UNV - Universal voltage (UNV)
347 - 347 volt (not available in dimming) (347)
*For LED MR16 Downlight dimming, consult LED Retrofit Lamp manufacturer for voltage dimmer compatibility
**Dimming not available in LEDMR16, However the CZEN800 or CZEN1000 can be dimmed on 277V
if specified with a programmable driver such as EldoLED or Lutron Hilume A series.
13. Circuit:
*EMC - Emergency Circuit (EMC)
*EMBP - Emergency Battery Pack (EMBP)
*Consult factory for available options
Continued on Next Page
Shown: Corner Options in Wall and
Ceiling Available - Consult Factory
Shown: Hinged Access Canopy(7.25”)
for Downlight (when positioned next
to linear fluorescent).
14. Additional Options (Leave blank if None):
*OS - Occupancy Sensor (OS)
*PH - Photocell - Consult Factory (PH)
MC -XX - MITERED CORNERS (MC-XX, XX= QTY OF CORNERS)
SPECIFY QTY OF CORNERS (i.e, 4x4 square = 16ft with 4 mitered corners)
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa .com
LIGHTPLANE 3.5 – Recessed
Page 3 of 4
TYPE:
Nominal
Length
gurations
14/24W
2’
21/39W
3’
28/54W
4’
35/80W
5’
21/39W
6’
28/54W
6’
21/39W
21/39W
28/54W
7’
28/54W
7’
28/54W
28/54W
8’
28/54W
21/39W
8’
21/39W
21/39W
21/39W
9’
21/39W
21/39W
21/39W
9’
21/39W
28/54W
28/54W
10’
14/24W
28/54W
28/54W
10’
28/54W
21/39W
28/54W
11’
21/39W
28/54W
28/54W
11’
28/54W
28/54W
28/54W
12’
28/54W
28/54W
21/39W
28/54W
12’
Notes:
21/39W
21/39W
21/39W
14/24W = 2’ 21/39W = 3’ 28/54W = 4’
35/80W = 5’
Stagger
Overlap
LPxD,
LPxR series
Fixture Length
LPID
LP11, LP15
Fixture Length
Fixture Length
none
2’
2’1”
2’5”
none
3’
3’1”
3’5”
none
4’
4’1”
4’5”
none
4’11”
5’1”
5’5”
none
5’10”
6’
6’5”
6”
6’3”
none
6’10”
7’
7’5”
6”
7’3”
none
7’10”
8’
8’5”
4.5”
7’10”
none
8’7”
8’9”
9’5”
5”
8’7”
none
9’9”
9’11”
10’5”
5”
9’9”
none
10’8”
10’11”
11’5”
5”
10’8”
none
11’8”
11’11”
12’5”
4”
11’4”
Contact factory for
exact sizes, or custom
Downlight modules may
affect length
All chart data re ects an estimated length. For
exact measurements, please consult factory and
submittal drawings per speci cation. Lengths
subject to change.
TBar
Distance
2’
4’
6’
6’
8’
8’
10’
10’
12’
12’
T5 con gurations
14/24W
28/54W
21/39W
21/39W
21/39W
21/39W
28/54W
28/54W
21/39W
21/39W
21/39W
28/54W
28/54W
28/54W
14/24W
28/54W
21/39W
28/54W
28/54W
28/54W
28/54W
28/54W
28/54W
14/24W
Stagger
Overlap
End
Panels
Direct Lamp
Fixture Length
none
none
23.75”
none
none
47.75”
none
2x1”
71.75”
4”
2x3”
71.75”
none
2x1”
95.75”
5”
2x1”
95.75”
none
2x2”
119.75”
4”
2x1”
119.75”
none
2x2”
143.75”
4”
2x1”
143.75”
End Panels are small aluminum plates to optimize staggered lamping for a more continuous lamp quality. End panels are placed at the end of runs to cover any dark
space.
Architectural Lighting Works reserves the right to make engineering changes at any time. Always consult factory for exact measurements.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa .com
LIGHTPLANE 3.5 – Recessed
Page 4 of 4
TYPE:
Suspended Ceiling Details
LP3.5RT
LPLRT
3 34 "
3 14 "
3 34 "
5""
3 14 "
3 13
16 "
3 34 "
5"
33 14 "
3 13
16 "
3 34 "
5"
3 14 "
3 13
16 "
3 43 "
5"
3 14 "
3 13
16 "
3 13
16 "
5 38 "
3 14 "
3 43 "
5 38 "
3 13
16 "
3 13
16 "
44 167 "
44 13
16 "
4"
4""
4"
4"
4"
4"
4"
4"
5 11
6"
16 "
5 14 "
5 14 "
5 14 "
5 14 "
LPLRT Flush
F lus h 1516
151 6
LPLRT Flush 151
15166
LLPLRT
P LR T Tegular
Te g uLPR3.5T
la r151 5 Tegular 1516
LPLRT FlushLLP3.5RT
916
LPLRT FFlush
lush 916
916
LPLRTT Slot
LPLR
Slot 916
916
L
LP3.5RT
Slot
916
LP3.5
Flush
1516
LP3.5RT
L
Flush
1516
RT
Flush
91
6
La
y -inTile
Tile
Lay-in
Teg
ularTile
Tile
ularTile
Til eTegular Tile
Tegular
Tegular
La
y -inTile
Tile Lay-in
Lay-in
Tegular
Teg
ularTile
T ile LLP3.5RT Flush 916Tegu
Tegular
ularTile
T ile Tegular rTile Teg
Lay-in
Tile
La
TTegular
u) Tile
La
Tile
rTile
Techzone)
(4" Techz
o ne
)
(4" Techzone)
Techzone
(4" Techzone)
Techzone )
(4" Techzone)
Techzone TTegular
)
Order: LP3.5RT-TGRID
Order:
O
rde r:LPLRT-TGRID
LPLRT-TGRID
5 38 "
5 11
16 "
LP
LP3.5RT
Tegular 916
T
Tegular
Tile
Order: LP3.5RT-SLOT
O
Order:
O
rde r:LPLRTLPLRTT-SS
LPLR3.5T
LPLR
3.5TLP3.5RT-Techzone
5"
5"
3
5 13
166 "
3 13
16 "
5"
5 13
16 "
3 13
16 "
5 38 "
5 11
16 "
5 38 "
6"
6"
6"
LP3.5RT Techzone
Flush 916 Tegular Tile
LP3.5RT Techzone
Slot 916 Tegular Tile
Order: LP3.5RT-ATZ-TGRID
O
P R
LP3.5RT Seamless
LP3.5RT Seamless TGRID
916 Lay-in Tile
LP3.5RT Seamless TGRID
1516 Lay-in Tile
Order: LP3.5RT-SEAMLESS-TGRID
5 38 "
3 13
16 "
3 13
16 "
LP
LP3.5RT Techzone
Fl
Flush
916 Lay-in Tile
6"
LP3.5RT Techzone Flush
1516 Te
Tegular Tile
13
5 16
"
3 13
16 "
3 13
16 "
6"
LP 3.5RT Techzone
Flush 1516 Lay-in Tile
5"
13
5 16
"
11
5 16
"
3 13
16 "
6"
LP3.5RT Techzone
e
Tegular
1516 Tegular Tile
6"
LP3.5RT Techzone
e
Tegular
916 Tegular Tile
Order: LP3.5RT-ATZ-SLOT
O
LP3.5RT Seamless SLOT
1516 Tegular Tile
(Interlude XL)
LP3.5RT Seamless Wood/Metal
Order: LP3.5RT-SEAMLESS-SLOT
Order: LP3.5RT-SEAMLESS-WOOD/METAL
Colors and Finishes:
Design Specifications
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
180
150
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
120
ACROSS
45
ALONG
90
Spacing Criterion
200
1.2
1.1
60
Catalog # LP3.5R-DRY-4-1-FSO-R120-EXT
400
600
0
Construction
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
Reflectors are formed from .040 aluminum and finished in Titanium
white powdercoat.
Lenses are made from twin layered extruded high-impact acrylic.
EXT is a half frosted/white combination.
Single piece construction aluminum louver with clear matte anodized finish.
Electrical Details
All ballasts are electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
Low voltage transformers are individual 60W units (277V/12V non-dim or
120/12V)
All LED drivers are integral electronic Class 2 unless otherwise noted.
LED light engine is LM-80 compliant with 80 CRI minimum.
Multiple interface options available including dimming, motion sensing, daylight harvesting and DALI.
ETL listed Damp with Lens
Emergency
Fixtures can be wired for emergency circuit or emergency battery
backup.
Emergency one-lamp ballasts provide 90 minutes of illumination.
T5/T5HO = Initial output of 1300 Lumens
Finish
All fixtures are standard in Ultimatte aluminum finish (AL) A deep etch and two-step clear anodizing process that
gives a smooth, clean and durable surface.
Powder Coat options are available. Consult factory.
30
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa .com