KBD 1050 – LIGHTING FOR KBD
EXERCISE 4 – LIGHTING/ELECTRICAL PLAN
OBJECTIVE:
With a given plan, complete a lighting and electrical plan as per NKBA specifications
and in a method that is the most energy efficient approach possible – in selecting both
fixtures and lamps.
JOB TASK:
Complete lighting and electrical plan including kitchen, dinette, hallway and half bath
in plan.
PROCEDURE:
1) Trace complete floor plan – and use measures that you read on your scale once
you have traced the plan.
2) Determine the following – all of kitchen area, bath and back hallway:
a. Outlets throughout and labeled appropriately including location
AFF(above finished floor)
b. Lighting source location and types; dimensioned as to location as it
related to perimeter walls and each other – i.e. recessed cans as they
related to all 4 walls and to each other – centerline to the center of the
location of the can or fixture. Select light sources (both fixtures and
lamps) that are as energy efficient as possible.
c. Switches for lighting and appliances as needed with proper and accurate
connecting lines; note the AFF of the switches as well – either on the plan
or within your legend (i.e. all switches at 48” AFF)
3) Include legend of symbols with their definition on plan as per NKBA’s
requirements; usually located to the right of the floor plan.
4) Label with name, scale and date.
5) Create specifications that promote your design and demonstrating a sustainable
solution.
6) Make copy to submit; you may scan and put in Dropbox or fax for submission.
DUE DATE:
Due the last week of class – no later than the last week of the semester.