NZQA Expiring unit standard
3643 version 8
Page 1 of 3
Title
Draw imposition schemes for sheet-fed printing, print finishing, and
bookbinding
Level
3
Credits
3
Purpose
People credited with this unit standard are able to draw
imposition schemes for sheet-fed printing, print finishing, and
bookbinding.
Classification
Printing > Printing Production
Available grade
Achieved
Explanatory notes
1
All workplace practices must meet any applicable and recognised codes of practice,
and documented workplace health, safety, and environmental procedures for
personal, product, and workplace health, safety, and environmental matters, and the
obligations required under current law including the Health and Safety in Employment
Act 1992, Hazardous Substances and New Organisms Act 1996, Resource
Management Act 1991, Privacy Act 1993 and their subsequent amendments.
2
Definitions
job requirements refer to specific requirements for the job at hand. These
requirements may or may not be covered in the job documentation and may include
special instructions, quality requirements expected by the customer, and/or
production standards as set down by the workplace and/or company;
workplace practices refer to the documented procedures for the machine and/or
workplace.
Outcomes and evidence requirements
Outcome 1
Draw imposition schemes for sheet-fed printing, print finishing, and bookbinding to meet
job requirements.
Range
four page, eight page, sixteen page, thirty-two page.
Evidence requirements
1.1
Page imposition is described and the effects of portrait and landscape pages on
imposition are explained.
Range
Competenz
SSB Code 101571
work and turn, work and tumble, self-backer, sheet work.
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
3643 version 8
Page 2 of 3
1.2
Standard imposition schemes are drawn for self-backer and sheet work up to
thirty-two pages in accordance with workplace practices.
1.3
Imposition schemes are drawn for multiple section work in accordance with
workplace practices.
Range
inserted sections, collated sections.
Replacement information
This unit standard and unit standard 17927 have been
replaced by unit standard 26323.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 February 1995
31 December 2015
Revision
2
20 July 1998
31 December 2015
Review
3
25 May 1999
31 December 2015
Review
4
26 January 2005
31 December 2015
Review
5
12 December 2008
31 December 2015
Review
6
21 August 2009
31 December 2015
Review
7
20 August 2010
31 December 2019
Rollover
8
10 December 2015
31 December 2019
Accreditation and Moderation Action Plan (AMAP) reference
0005
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, or
an inter-institutional body with delegated authority for quality assurance, before they can
report credits from assessment against unit standards or deliver courses of study leading
to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
3643 version 8
Page 3 of 3
Consent requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016