NZQA registered unit standard
17009 version 4
Page 1 of 3
Title
Produce a scale plan of flooring worksite in the flooring industry
Level
3
Credits
Purpose
8
This unit standard is for people working in the flooring industry.
People credited with this unit standard are able to: produce a
sketch plan of the floor site; produce a scale plan of the floor
site; and complete job records.
Classification
Construction Trades > Flooring
Available grade
Achieved
Explanatory notes
1
Performance of the outcomes of this unit standard must comply with the following
legislation and guides: the Building Act 2004; Health and Safety in Employment Act
1992; A Guide to the Health and Safety in Employment Act 1992, 2nd edition
(Department of Labour, 2003) available at http://www.osh.dol.govt.nz; and their
subsequent amendments.
2
Definition
Workplace procedures are all authorised instructions, processes and work practices
carried out in the workshop, factory, shop and worksite.
Outcomes and evidence requirements
Outcome 1
Produce a sketch plan of the floor site.
Evidence requirements
1.1
Plan includes measurements in accordance with workplace procedures.
Range
1.2
may include but is not limited to – running measurements, fixed
measurements.
Plan identifies site characteristics in terms of their significance for the proposed
job.
Range
may include but is not limited to – fireplaces, trap doors, fittings,
steps, substrate conditions, plumbing fixtures, control joints,
penetrations, falls and levels, up-stands, terminations.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
17009 version 4
Page 2 of 3
Outcome 2
Produce a scale plan of the floor site.
Evidence requirements
2.1
Plan produced includes dimensions of site in accordance with workplace
procedures.
2.2
Plan produced includes all site characteristics in terms of their location on the
site and their dimensions, in accordance with workplace procedures.
2.3
Plan includes client details.
includes but is not limited to – name, address, date, location of
work site.
Range
2.4
Plan identifies product location in terms of specified rooms and areas.
Outcome 3
Complete job records.
Evidence requirements
3.1
Job sheets are completed in accordance with workplace procedures.
3.2
Records are stored in accordance with workplace procedures.
Planned review date
31 December 2015
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
29 May 2000
31 December 2012
Revision
2
18 February 2004
31 December 2012
Review
3
26 March 2007
31 December 2012
Review
4
18 February 2011
N/A
Accreditation and Moderation Action Plan (AMAP) reference
0175
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
17009 version 4
Page 3 of 3
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, or
an inter-institutional body with delegated authority for quality assurance, before they can
report credits from assessment against unit standards or deliver courses of study leading
to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Consent requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact Building and Construction Industry Training Organisation
info@bcito.org.nz if you wish to suggest changes to the content of this unit standard.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016