NZQA Expiring unit standard
25606 version 3
Page 1 of 3
Title
Demonstrate knowledge of setting up and operating fixed joinery
machinery for laminated fabrication
Level
3
Credits
2
Purpose
People credited with this unit standard are able to demonstrate
knowledge of setting up, and operating fixed joinery machinery
for laminated fabrication.
Classification
Joinery > Laminate Fabrication
Available grade
Achieved
Explanatory notes
1
Range
Machinery referred to in this unit standard includes but is not limited to – laminate
forming machine, nip roller, heated press, horizontal sander, glue spreader.
2
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
3
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
This unit standard is
Outcomes and evidence requirements
expiring
4
This unit standard can be assessed against in a simulated situation using as set of
job specifications.
Outcome 1
Demonstrate knowledge of setting up fixed joinery machinery for laminated fabrication.
Evidence requirements
1.1
The process for setting up fixed joinery machinery is identified and
demonstrated in accordance with manufacturer’s specifications and workplace
practices.
1.2
The process for making jigs and templates is identified and demonstrated in
accordance with given job specifications and workplace practices.
Range
evidence is required of three different examples.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
25606 version 3
Page 2 of 3
Outcome 2
Demonstrate knowledge of operating fixed joinery machinery for laminated fabrication.
Evidence requirements
2.1
Types of fixed joinery machinery used in laminated fabrication are identified and
described in terms of their purpose.
Range
2.2
evidence is required of three different types.
The process of machining material for laminated fabrication is demonstrated in
accordance with given job specifications and workplace practices.
Range
evidence is required of three different examples of machined
material.
Replacement information
This unit standard and unit standard 10173 have been
replaced by unit standard 28222.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
20 February 2009
31 December 2018
Review
2
24 October 2014
31 December 2018
3
17 September 2015
31 December 2018
This
unit standard
is
Consent and Moderation Requirements (CMR) reference
0073
expiring
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Rollover
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
25606 version 3
Page 3 of 3
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016