NZQA Expiring unit standard
7193 version 7
Page 1 of 3
Title
Tuft carpet on an enhanced graphics tufter
Level
4
Credits
15
Purpose
This unit standard is for people working in the carpet
manufacturing industry. People credited with this unit standard
are able to demonstrate knowledge of enhanced graphics
tufting, and produce carpet on an enhanced graphics tufter.
Classification
Textiles Manufacture > Carpet Manufacture
Available grade
Achieved
Entry information
Prerequisites: Unit 7190, Tuft plain carpet, and Unit 7192, Tuft
carpet on a graphics tufter; or demonstrate equivalent
knowledge and skills.
Critical health and
safety prerequisites
Explanatory notes
1
Plant safety practices and procedures comply with Health and Safety in Employment
(HSE) Act 1992, and workplace procedures.
2
Workplace productivity and quality requirements are met.
3
This unit standard recognises the additional skills required to tuft carpets on an
enhanced graphics tufter. The basic tufting and graphics tufting skills are recognised
in the prerequisite unit standards.
4
Competence will be demonstrated over the range of product produced in the
workplace.
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of enhanced graphics tufting.
Evidence requirements
1.1
Enhanced graphics carpet is described in terms of construction characteristics.
Range
Competenz
SSB Code 101571
pattern formation, pattern sequence.
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1.2
7193 version 7
Page 2 of 3
Enhanced graphics tufter sections and components are described in terms of
function and operation.
Range
pattern rollers, yarn guides, pattern actuating mechanisms.
Outcome 2
Produce carpet on an enhanced graphics tufter.
Evidence requirements
2.1
Thread up conforms to work instruction and pattern.
2.2
Pattern faults are traced to yarn and rectified according to the design
specification.
2.3
Broken joins are repaired in sequence required by the pattern.
2.4
Broken yarns are threaded to the pattern roller according to the pattern.
2.5
Carpet production meets workplace productivity and quality standards.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
28 May 1996
31 December 2019
Revision
2
16 November 1998
31 December 2019
Revision
3
10 October 2001
31 December 2019
Revision
4
12 August 2004
31 December 2019
Rollover and
Revision
5
26 March 2007
31 December 2019
Rollover
6
16 July 2010
31 December 2019
Review
7
19 May 2016
31 December 2019
Consent and Moderation Requirements (CMR) reference
0030
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, or
an inter-institutional body with delegated authority for quality assurance, before they can
report credits from assessment against unit standards or deliver courses of study leading
to that assessment.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
7193 version 7
Page 3 of 3
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Consent requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Apparel and Textile Industry Training Organisation
training@atito.org.nz if you wish to suggest changes to the content of this unit standard.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016