NZQA registered unit standard 17430 version 4 Page 1 of 4

advertisement
NZQA registered unit standard
17430 version 4
Page 1 of 4
Title
Operate barring gear and jacking oil systems from a thermal
electricity generation control room
Level
4
Credits
3
Purpose
People credited with this unit standard are able to: demonstrate
knowledge of barring gear and jacking oil systems; operate and
monitor barring gear and jacking oil systems; and identify and
respond to deviations in barring gear and jacking oil systems
operations.
Classification
Electricity Supply > Electricity Supply - Thermal Operations and
Control
Available grade
Achieved
Entry information
Critical health and
safety prerequisites
National Certificate in Energy and Chemical Plant (Process
Operation) with optional strands in Steam Generation; Turbine
Operations; Waste Treatment; Refrigeration; Chemical
Continuous Process; Chemical Batch Process; Solid Handling;
Petrochemical Field Operations; Petrochemical Control Room
Operations; Petrochemical Production Storage; Kraft Cycle
Operations; Kraft Bleach and Chemical Operations; and Kraft
Pulping and Chemical Plant [Ref: 1344]; and National
Certificate in Electricity Supply (Thermal Operator) (Level 4) with
strands in Thermal Operations, Combined Cycle Operations, and
Geothermal Operations [Ref: 0894]; or demonstrate equivalent
knowledge and skills.
Explanatory notes
1
This unit standard is intended for, but not restricted to, workplace assessment. The
range statements within the unit standard can be applied according to industry
specific equipment, procedures and processes.
2
Safety of personnel and plant must be a priority throughout the assessment. If the
safety requirements are not met the assessment must stop.
Electricity Supply Industry Training Organisation
SSB Code 101813
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
17430 version 4
Page 2 of 4
3
Performance and work practices in relation to the outcomes and evidence
requirements must comply with all current legislation, especially the Electricity Act
1992, and any regulations and codes of practice recognised under that statute; the
Health and Safety in Employment Act 1992; and the Resource Management Act
1991. Electricity supply industry codes of practice and documented industry
procedures include the current version of the Safety Manual – Electricity Industry
(SM-EI) Wellington: Electricity Engineers’ Association. A full list of current legislation
and industry codes is available from the Electricity Supply Industry Training
Organisation, PO Box 1245, Hamilton 3240.
4
The phrase in accordance with industry requirements is implicit in all outcomes and
evidence requirements in this unit standard.
5
Industry requirements include all asset owner requirements; manufacturers’
specifications; and enterprise requirements which cover the documented workplace
policies, procedures, specifications, business, and quality management requirements
relevant to the workplace in which assessment is carried out.
6
The term operate is defined as the remote operation, testing and commissioning of
main and auxiliary thermal plant systems associated with large steam/electrical
generation plant from a control room environment.
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of barring gear and jacking oil systems.
Evidence requirements
1.1
Barring gear is described.
Range
1.2
Jacking oil system is described.
Range
1.3
purpose, operation, hand barring, control and indication.
function of jacking oil, type and operation of jacking oil pumps,
control and instrumentation.
Operating parameters are identified.
Range
shaft speed, pressure, cut-in/out, alarms.
Outcome 2
Operate and monitor barring gear and jacking oil systems.
Evidence requirements
2.1
Current status of systems is identified.
Electricity Supply Industry Training Organisation
SSB Code 101813
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
17430 version 4
Page 3 of 4
2.2
Routine operations are carried out.
2.3
Actions are logged.
2.4
Operating decisions are determined in accordance with plant status.
may include but is not limited to – plant availability and service
condition, resource consent and loading limits, impact on
operations.
Range
2.5
Plant and equipment are monitored.
Outcome 3
Identify and respond to deviations in barring gear and jacking oil systems operations.
Evidence requirements
3.1
Deviations from normal operating conditions are identified, logged and acted
upon.
include all that apply – jacking oil pump failure, barring gear
failure, hogging, rubbing.
Range
3.2
Plant safety procedures are followed.
Planned review date
31 December 2015
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
23 October 2001
N/A
Revision
2
11 February 2004
N/A
Rollover and
Revision
3
25 June 2007
N/A
Review
4
9 December 2010
N/A
Accreditation and Moderation Action Plan (AMAP) reference
0120
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, or
an inter-institutional body with delegated authority for quality assurance, before they can
report credits from assessment against unit standards or deliver courses of study leading
to that assessment.
Electricity Supply Industry Training Organisation
SSB Code 101813
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
17430 version 4
Page 4 of 4
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Consent requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Electricity Supply Industry Training Organisation info@esito.org.nz if
you wish to suggest changes to the content of this unit standard.
Electricity Supply Industry Training Organisation
SSB Code 101813
 New Zealand Qualifications Authority 2016
Download