NZQA registered unit standard
25434 version 2
Page 1 of 2
Title
Plan for and manage the emptying of a zinc kettle at a hot dip
galvanizing facility
Level
4
Credits
8
Purpose
People credited with this unit standard are able to: develop a
plan for the emptying of a zinc kettle at a hot dip galvanizing
facility, and manage the implementation of the plan for
emptying a zinc kettle.
Classification
Industrial Coatings > Hot Dip Galvanizing
Available grade
Achieved
Explanatory notes
1
The current version of the following documents must be complied with:
Health and Safety in Employment Act 1992;
Health and Safety in Employment Regulations 1995;
Guidelines for the Management of Work in Extremes of Temperature Occupational
Safety and Health Service, 1997, available at http://www.osh.govt.nz.
2
Definition
Company procedures refer to all documented policies and procedures of the
candidate’s employer at the time of training including, but not limited to, those relating
to health, safety, environment, quality, and operations.
Outcomes and evidence requirements
Outcome 1
Develop a plan for the emptying of a zinc kettle at a hot dip galvanizing facility.
Evidence requirements
1.1
A plan is developed for emptying the zinc kettle in accordance with legislative
requirements and company procedures.
Range
includes but is not limited to – kettle care; zinc storage capacity;
personnel health, safety, and environmental considerations;
communication requirements.
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
25434 version 2
Page 2 of 2
Outcome 2
Manage the implementation of the plan for emptying a zinc kettle.
Evidence requirements
2.1
Management ensures that the zinc kettle is emptied in accordance with the
plan, legislative requirements, and company procedures.
Replacement information
This unit standard replaced unit standard 21181.
Planned review date
31 December 2019
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
23 January 2009
31 December 2016
Review
2
16 April 2015
N/A
Consent and Moderation Requirements (CMR) reference
0114
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the NZ Motor Industry Training Organisation (Incorporated) (MITO)
info@mito.org.nz if you wish to suggest changes to the content of this unit standard.
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
 New Zealand Qualifications Authority 2016