NZQA registered unit standard
9275 version 3
Page 1 of 2
Title
Support casting operations using an overhead crane
Level
3
Credits
Purpose
12
This unit standard is for people working in the steel
manufacturing sector.
People credited with this unit standard are able to transport
casting support equipment, and perform specific maintenance
lifts.
Classification
Steel Manufacturing > Steel Product Handling
Available grade
Achieved
Explanatory notes
1
Legislation relevant to this unit standard includes but is not limited to – Health and
Safety in Employment Act 1992, Resource Management Act 1991.
2
This unit standard must be assessed in a workplace environment.
Outcomes and evidence requirements
Outcome 1
Transport casting support equipment.
Evidence requirements
1.1
Movement of casting support equipment is performed in a manner that
establishes and maintains continuity of casting operations.
Range
1.2
casting support equipment may include but is not limited to –
empty ladles, tundishes, slag and scull boxes, ladle roofs,
consumables, lance racks, moulds, segments;
evidence of four is required.
The spatial position of support equipment during transit ensures the safety of
personnel and plant.
Outcome 2
Perform specific maintenance lifts.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
9275 version 3
Page 2 of 2
Evidence requirements
2.1
Specific maintenance lifts are performed in accordance with maintenance
requirements to ensure adherence to schedules is maintained.
maintenance lift may include but are not limited to – mould
changes, ladle cars, dummy bars;
evidence of two is required.
Range
Planned review date
31 December 2012
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
30 January 1997
31 December 2012
Revision
2
18 July 2000
31 December 2012
Rollover and
Revision
3
15 March 2012
N/A
Consent and Moderation Requirements (CMR) reference
0013
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact Competenz qualifications@competenz.org.nz if you wish to suggest
changes to the content of this unit standard.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016