NZQA Expiring unit standard
Title Integrate steam and condensate systems components
3202 version 6
Page 1 of 4
4 Credits 15 Level
Purpose This unit standard is for people who work, or intend to work, in the heating, ventilation and air conditioning sector of the engineering industry. People credited with this unit standard are able to: set up the job for a steam and condensate system; integrate the steam and condensate equipment, fuel supply equipment and distribution components; and test and fill the system.
It is recommended that people undertaking assessment for this unit standard have already demonstrated competence in metal fabrication - light. They should also have demonstrated competence in welding to the standards specified in B.S. 2640 and B.S. 2971 or industry accepted equivalent.
Classification Mechanical Engineering > Heating, Ventilating, and Air
Conditioning
Available grade
Entry information
Achieved
Critical health and safety prerequisites
Prerequisites: Unit 3234, Install steel pipe work according to plans and specifications under supervision ; Unit 3235, Install copper pipe work according to plans and specifications under supervision ; Unit 3240, Install mechanical services plant to plans and specifications under supervision; Unit 3244, Install control components to plans and specifications under supervision; or demonstrate equivalent knowledge and skills.
Explanatory notes
1 Work site documents include contracts and any documented installation and operating procedures for the system.
2 Set up the job means prepare to install and integrate steam and condensate equipment, fuel supply equipment and distribution components.
3 All work site practices must meet recognised codes of practice and documented safety procedures and safety plans (where these exceed code) for personal and work site safety, and obligations required under current legislation.
Competenz
SSB Code 101571

New Zealand Qualifications Authority 2020

NZQA Expiring unit standard 3202 version 6
Page 2 of 4
4 Installation programme refers to any documented programme for installing the system (eg, a construction programme).
5 Integrate means to install components and check details to ensure that they relate correctly to each other to form a functioning system, and that components are installed to conform to system principles for correct operation.
6 Industry standards include B.S. 2640, B.S. 2971, B.S. 4870 Part 1: 1981, B.S.
4871 Part 1: 1982, and ASME IX.
7 Assessment of this unit standard will only be completed after commissioning of the system shows no faults with the integration of equipment and components.
Outcome 1
Set up the job for a steam and condensate system.
Evidence requirements
1.1 System installation drawings are checked against the work site and confirmed or modified as suiting the site conditions.
1.2 Equipment and components required for the system’s installation are checked against t he schedule(s) of quantities and manufacturer’s or supplier’s data, and procured.
1.3 Installation of system is coordinated with other trades.
Range building, water, gas, electricity, plumbing.
1.4 Permits and consents are verified as meeting job relevance, date and authorisation.
Outcome 2
Integrate steam and condensate equipment, fuel supply equipment and distribution components.
Evidence requirements
2.1 Components and equipment are related to each other in the positions laid down in the work site documents.
2.2 Installation of equipment and components occurs in the sequence laid down in the installation programme and work site documents.
2.3 Integration of equipment and components complies with quality plans, specifications and requirements.
Competenz
SSB Code 101571

New Zealand Qualifications Authority 2020

NZQA Expiring unit standard
Outcome 3
3202 version 6
Page 3 of 4
Test and fill the system.
Evidence requirements
3.1 Tests are done and recorded in accordance with work site documents.
Range equipment and component operational tests, system integrity (no leaks) tests.
3.2 System is filled, flushed and water-treated in accordance with work site documents.
Replacement information This unit standard, unit standard 3199, unit standard
3200, unit standard 3201, unit standard 3203, unit standard 3204, and unit standard 3205 have been replaced by unit standard 26332.
This unit standard is expiring. Assessment against the standard must take place before the expiry date set out below.
Status and review information
Expiring date 16 July 2010
Date version published 16 July 2010
Expiry date 31 December 2016
Accreditation and Moderation Action Plan (AMAP) reference 0013
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do
.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Competenz
SSB Code 101571

New Zealand Qualifications Authority 2020

NZQA Expiring unit standard 3202 version 6
Page 4 of 4
Consent requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Competenz
SSB Code 101571

New Zealand Qualifications Authority 2020